Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A
Package Contents
Part
ACrossbar
B
C
D
E
F
G
H
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Fixture Canopy
Fixture Body
Crystal Pendant
Crystal ClusterI
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
4 pcs.
1pc.
1pc.
20 pcs.
10 pcs.
G
B
C
D
H
E
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
F
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
1of6
I
September2012
JLE1709IS
FINISH: IMPERIAL SILVER
2.4mm
13Ga
QUOIZEL
GND
4.5” Dia.
R
1”
1
(2) 60W Candelabra
Base Bulbs
(No Supplied)
13.5”
6”
8” Dia.
9” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBER
NO.
1
11709ISJLE
2
REPLACEMENT PART DESCRIPTION
BASE IMPERIAL SILVER JLE1709IS
2of6
REQ.
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-JLE1709IS
For Style JLE1709IS
STEP 1Attach Fixture Body to Fixture
-
Canopy
A. Thread the Nipple on the bottom of Fixture Canopy (F)
into the Coupling in the middle of Fixture Body (G). Hand
tighten until snug.
STEP 2 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
Figure 1
Fixture Canopy
Nipple
Coupling
Fixture Body
Figure 2
Crossbar
Mounting Screw
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy.
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Lock Washer
Ceiling
Canopy
Hex Nut
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
3of6
September2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-JLE1709IS
For Style JLE1709IS
STEP 3 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 4Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 3
Outlet
Box
Crossbar
Mounting
Hole
Outlet Box
Screw
Figure 4
White wire from supplyWhite wire from fixture
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 5
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
or visit us on-lineat www.quoizel.com
4of6
September2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-JLE1709IS
For Style JLE1709IS
STEP 5 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy on the top of the fixture over
the Mounting Screws (B) and secure with Mounting
Balls (E). Hand tighten until snug.
Ceiling
Canopy
Figure 6
Mounting
Screw
Mounting
Ball
STEP 6Attach Crystal Pendant to Fixture Body-
A. Attach Crystal Pendants (H) to the Holes on the Side Arms.
Figure 7
Side Arm
Hole
Crystal
Pendant
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
5of6
September2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-JLE1709IS
For Style JLE1709IS
STEP 7 - Attach Ceiling Canopy to Mounting
Screw
A. Attach one end of Crystal Clusters (I) to the Hangers on
the bottomCanopy.CeilingAttach the another end of
the Crystal Clusters (I) to the Holes on the Ring.
Ring
Ceiling
Canopy
Hanger
Figure 8
Crystal
Cluster
STEP 8Install Bulb-
A. This fixture uses standard bulb with a standard screw base.
Maximum 60 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 9
Bulb
Socket
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
6of6
September2012
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.