Quoizel IE5005BN User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS IE5005-
STYLE NUMBER IE5005BN:
PACKAGECONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Description
Crossbar
Green Ground Screw
Hex Nut
Nipple
Lock Washer
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Ceiling Canopy
Lock Screw
Steel Ring
Fixture Loop
Fixture Assembly
Socket Collar
Shade
Quantity
1pc
1pc
2pcs
1pc
2pcs
1pc
1pc
1pc
1pc
5pcs
1pc
1pc
1pc
5pcs
5pcs
ISSUED 06-2008 Revised 2008 08 27- -
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
!
WARNINGSANDCAUTIONS
WARNING:
● Before beginning the instal lation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safety. It is very i mpo rtant that they are read completely b efo re the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the pow er source before replacing the bulb(s), making sure t he bulb(s) had suffi cient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compar e parts with pac kage
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Est imated Assembly Time: 15 30 minutes
● Tool s Required for Assembly (not include d): Flathea d s crewdriver Phill ips screwdriver, pliers, ele ctrical
tape, wire cutters, safety glasses &5, 100 Watt, Type A Medium Base Bulbs.
● Helpful Tools (not included) : Wire Stripp ers.
,
-
1 OF 3
ASSEMBLYINSTRUCTIONS
STEP 1:
a Unfold the Support Arms to proper locations.
.
b. Locate Steel Ring from the bottom of the Fixture
Assembly and match the holes on the Ring onto the
Mounting Holes on the Support Arms.
c. Using screwdriver, thread Lock Screws into the
Mounting Holes and tighten until snug to secure the
Steel Ring onto Support Arms.
STEP 2:
Thread Fixture Loop onto the Nipple on the top
a.
center of the Fixture Assembly. Hand tighten until
snug.
STYLE NUMBER IE5005BN:
SupportArm
Mounting Hole
Steel Ring
Lock Screw
Fixture Loop
STEP 3:
Secure the Crossbar onto the Outlet Box with
a.
Outlet Box Screws Tighten until snug. .
STEP 4:
*
Plier is required on this step
. .
Thread one Hex Nut onto top end of the Nipple
a
.
Place one Lock Washer over the top end of the
b
Nipple and then thread the Nipple into the
center lock hole of the Crossbar
. ,
Us plier thread the Hex Nut against the
c ing
rossbar and hand tighten until snug
c
.
Thread another Hex Nut onto the bottom end of
d
the Nipple
.
.
.
.
Crossbar
Fixture Assembly
Outlet Box
Crossbar
Outlet BoxScrew
Lock Washer
Hex Nut
Nipple
2 OF 3
Hex Nut
Loading...