Quoizel HS8604C User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

OUTLET BOX

..

and GROUND WIRE

,.

SUPPLYWIRES

CROSSBAR

(2)MOUNTING

SCREWS

SOCKET COLLAR

SHADE

INSTALLATION INSTRUCTIONS

1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.

2 Turn the electrical power to installation point OFF at circuit breaker

..

3

.;Place the CROSSBAR on the BACKPLATEand align the holes in the

BACKPLATE with a set of slots in the CROSSBAR. Mount the CROSSBAR
to the outlet box with (2) OUTLET BOX SCREWS (not provided).

4. :

Make the connections

Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE to FIXTURE

WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE BLACK

(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap

each connection with approved electrical tape.

5. Carefully tuck all wires into the WALLMOUNTED OUTLET BOX and position

the fixture over the outlet box. Align the HOLES on the edge of the
BACKPLATE with the 2 mounting holes on the folded edge of the
CROSSBAR. Use screw driver, thread the (2)MOUNTING SCREWS into the
mounting holes on the folded edge of the CROSSBAR. Hand tighten until
snug to secure the BACKPLATE.

,

()

(2)OUTLET BOX SCREW

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!

(not supplied)

SOCKET

BACKPLATE

6. Position the SHADE over the SOCKET as shown. Secure the SHADE by
threading the SOCKET COLLAR onto the SOCKET. Hand tighten until snug.

7. Install the correct bulbs referring to the fixture markings and/or labels for
maximum wattage.

8 Restore power to the installation point ON. Retain this sheet for future

.

reference.

IS HS8604

-

2007-08-08