Quoizel HS8601C User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

OUTLET BOX

..

(2)OUTLET BOX SCREWS

,.

(not supplied)

CROSSBAR

SOCKET COLLAR

BACKPLATE

SHADE

INSTALLATION INSTRUCTIONS

1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.

2 Turn the electrical power to installation point OFF at circuit breaker

..

3

.Place the CROSSBAR on the BACKPLATE and align the holes in the

BACKPLATE with a set of slots in the CROSSBAR. Mount the CROSSBAR
to the outlet box with (2) OUTLET BOX SCREWS (not provided).

4. :

Make the connections

Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUNDWIRE attach the HOUSE WHITE WIRE to FIXTURE

WHITE (or RIBBED SIDE) SUPPLYWIRE; connect the HOUSEBLACK

(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap

each connectionwith approved electrical tape.

5. Carefully tuck all wires into the WALLMOUNTED OUTLET BOX and position

the fixture over the outlet box.Align the HOLES on the edge of the

SOCKET

BACKPLATE with the 2 mounting holes on the folded edge of the
CROSSBAR. Usescrew driver, thread the (2)MOUNTING SCREWS into the
mounting holes on the folded edge of the CROSSBAR. Hand tighten until
snug to secure the BACKPLATE.

,

;

()

FIXTURE SUPPLY WIRE
and GROUND WIRE

(2)MOUNTING SCREWS

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!

6. Position the SHADE over the SOCKET as shown. Secure the SHADE by
threading the SOCKETCOLLAR onto the SOCKET. Hand tighten until snug.

7. Install the correct bulb referring to the fixture markings and/or labels for
maximum wattage.

8 Restore power to the installation point ON. Retain this sheet for future

.

reference.

IS HS8601

-

2007-08-08