6 CORPORATE PARK WAY
GOOSE C RE EK ,S C. 2944 5
www. qu oizel . com
OUTLET BOX
FI GURE1
UNIVERSAL
CROSSBAR
(2) OUTLET
BOX SCREWS
(not supplied)
SOCKET COLLAR
SHADE
IN STALLATION INSTRUCTIONS:
1. Before beginning installation , carefull y unpack and i dentify all
parts referring to illustration FIGURE 1.
2. Turn the electrical power to installation poin t OFF at circu it
breaker. Locate the UNIVERSAL CROSSBAR and sec ure to
OUTLET BOX with (2)OUTLET BOX SCREWS(not supplied).
3. M ake t he conn ect ions: (Quoizel recommend s 2 people for
this step)Use wire connectors(not supplied )connect t he
HOUSE GROUND to the FIXTURE GROUND WIRE; attach
the HOUSE WHITE WIRE to FIXTURE WHITE (or RIBBED
SIDE) SUPPLY WIRE; co nnect the HO USE BLACK (or RED)
WIRE to the FIXTURE BLACK (or SMOOTH SIDE) WIRE.
Wrap each connec tion with ap proved electrical tape.
4. Carefully tuck all wires into the WALL MOU NTED OUTLE T
BOX and position the fixture over the outlet box. Ali gn the
HOLES in the BACK PLATE with the (2 ) MOUNTING
SCREWS attached to the UNIVERSAL CROSSBAR. Pass
the fixture over the (2)MOUNTING SCREWS and secure
against by threading (2)MOUNTING BALLS onto en d of screw.
Tighte n until snug .
(2) MOUNTING SCREWS
GREEN GROUND SCREW
FIXTURE SUPPLY WIR E
and GROUND WIRE
BACK PLATE
SOCKET
5. Position the SOCKET through the hole in the SHADE .
Secure SHADE by threading SOCKET COLLARS onto
SHADE
HOLDER
SOCKETS and hand tighten until snug.
6. Install bulb(s) referring to fixture markin g and /or labe ls for
maximum wattage.
7. Restore power to the installation point ON. Ret ain this she et
for future reference.
(2) MOUNTING BALLS
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
IS-GE8601
12.05