Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering June result.
Do not touch the bulb with bare hands use a cloth or glove.
Thank youfor purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.March2014
or visit us on-line at www.quoizel.com
1of8
EMP1623C
FINISH: POLISHED CHROME
23.5” Dia.
21.5” Dia.
2”
8.5”
(18)20W
NO.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Maximum
Clear G4 Xenon
(Supplied)
PART NUMBER
I1201SC
1
G3750CR
G3761CR
G3743CR
G3763CR
G3764CR
G3751CR
G3744CR
G3745CR
G3753CR
G3746CR
G3748CR
G3749CR
G3755CR
G3756CR
G3757CR
G3758CR
G3759CR
G3760CR
G3762CR
G3752CR
G3747CR
G3754CR
1
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BULB 20W XENON G4 CLEAR
CRYSTALBEAD STRAND 10.75”L, PART”A8”
CRYSTALBEAD STRAND 19”L, PART “B11”
CRYSTALBEAD STRAND 2.25”L, PART “A1”
CRYSTALBEAD STRAND 20.25”L,PART “B13”
CRYSTALBEAD STRAND 20.5”L, PART “B14”
CRYSTALBEAD STRAND 3”L, PART “B1”
CRYSTALBEAD STRAND 4.25”L, PART “A2”
CRYSTALBEAD STRAND 6”L, PART “A3”
CRYSTALBEAD STRAND 7”L, PART “B3”
CRYSTALBEAD STRAND 7.5”L,PART “A4”
CRYSTALBEAD STRAND 9.75”L, PART “A6”
CRYSTALBEAD STRAND 10.5”L, PART “A7”
CRYSTALBEAD STRAND 11”L, PART “B5”
CRYSTALBEAD STRAND 12.75”L,PART “B6”
CRYSTALBEAD STRAND 14.25”L, PART “B7”
CRYSTALBEAD STRAND 16”L, PART “B8”
CRYSTALBEAD STRAND 17.25”L, PART “B9”
CRYSTALBEAD STRAND 18.25”L, PART “B10”
CRYSTALBEAD STRAND 19.75”L, PART “B12”
CRYSTALBEAD STRAND 5”L, PART “B2”
CRYSTALBEAD STRAND 8.75”L, PART “A5”
CRYSTALBEAD STRAND 9”L, PART “C”/”B4”
REQ.
18
1
2
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
72
A1
A2
A3
A4
A5
A6
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
C
4
8
9
7
21
10
2of8
11
22
12
13
2
23
14
15
16
17
18
19
3
20
5
6
23
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Package Contents
Part
A
B
C230mm Bead Strand C
D
E
F
G
H
I
J
Description
Crystal String A
- 2.25”L Crystal Bead Strands [A1 x 2pcs]
- 4.25”L Crystal Bead Strands [A x 2pcs]
- 6”L Crystal Bead Strands [A x 2pcs]
- 7.5”L Crystal Bead Strands [A x 2pcs]
- 8.75”L Crystal Bead Strands [A x 2pcs]
- 9.75”L Crystal Bead Strands [A x 2pcs]
- 10.5”L Crystal Bead Strands [A x 2pcs]
- 10.75”L Crystal Bead Strands [A x pc]
Crystal String B
”LBead Strands
- 3 Crystal[B1 x 2pcs]
- 5”L Crystal Bead Strands [x 2pcs]
- 7”L Crystal Bead Strands [x 2pcs]
- 9”L Crystal Bead Strands [x 2pcs]
- 11”L Crystal Bead Strands [x 2pcs]
- 12.75”L Crystal Bead Strands [x 2pcs]
- 14.25”L Crystal Bead Strands [x 2pcs]
- 16”L Crystal Bead Strands [x pc ]
- 17.25”L Crystal Bead Strands [B x 2pcs]
- 18.25”L Crystal Bead Strands [Bx 2pcs]
- 19”L Crystal Bead Strands [Bx 2pcs]
- 19.75”L Crystal Bead Strands [Bx 2pcs]
- 20.25”L Crystal Bead Strands [Bx 2pcs]
- 20.5”L Crystal Bead Strands [Bx pc]
Inner Backplate
Wall Anchor
Self-tapping Screw
Fixture Body
G4 Bulb
Washer
Mounting Ball
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
A1
A2
A3
A4
A5
A6
A7
A8
B3
B4
B5
B6
B7
2
3
4
5
6
7
81
B2
B3
B4
B5
B6
B7
B8 2 s
9
10
11
12
13
14 1
Quantity
1pc.
1pc.
70 pcs.
1pc.
6 pcs.
6 pcs.
1pc.
18 pcs.
6 pcs.
4 pcs.
A
B1
B2
B
C
D
G
B8
B9
B10
B11
B12
B13
B14
E
F
H
I
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of8
J
March2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
STEP 1 - Attach Inner Backplate to Outlet
Box
A. Place the Inner Backplate (D) onto the ceiling and
line up one set of holes on the Inner Backplate onto
mounting holes on the Outlet Box. Using a pencil,
mark the locations for WallAnchors (E).
B. Remove the Inner Backplate (D) and drill holes from
the marks and then push the Wall Anchors (E) into the
holes.
C. Position the Inner Backplate (D) back onto the
Ceiling. Thread the Outlet Box Screws (not supplied)
into the mounting holes on the Outlet Box to secure it.
Hand tighten until snug.
D. Pass the Washers (I) over the Self-tapping screws
(F) and then thread the self-tapping screws (F) into
the Wall Anchors (E). Hand tighten until snug.
Figure 1
CEILING
Outlet Box
Screw
Outlet
Box
Washer
Self-tapping
Screw
Wall
Anchor
Mounting
Hole
Inner
Backplate
STEP 2 - Attach Lanyard
A. The purpose of the lanyard is to provide the installer a
means to support the fixture from the junction box while
connecting the electrical wires. This enables the fixture
to hang from the junction box and your hands are free to
make the wire connections.
B. TurntheButtonStopsoitmaybeinsertedintothe
crossbar slot. Make sure the Button Stop is completely
inside the crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop. Proceed to the
wiring steps. Once you are complete with the wiring there
is nothing to do with Lanyard. The Lanyard will push into
the junction box when the fixture is placed for final
mounting.
Slot
Button Stop
Lanyard
Inner
Backplate
Figure 2
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of8
March2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
STEP 3Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supplyWhite wire from fixture
Figure 4
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 3
STEP 4Attach Fixture Body to Mounting
-
Screw
A. Place the Fixture Body (G) over the Mounting Screws
and secure with Mounting Balls (J). Hand tighten until
snug.
STEP 5Remove Protective Film-
A. Remove the Protective Film on the ceiling canopy.
Figure 5
Mounting
Screw
Inner
Backplate
Fixture Body
Mounting
Balls
Protective
Film
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of8
Figure 6
March2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
STEP 6Install Bulb-
A. This fixture uses Clear G4 Xenon Bulbs. Maximum 20
watts.
B. Insert bulb and seat properly into place.
IMPORTANT:
Do not touch the bulb with bare hands use
a cloth or glove.
STEP 7 - Install Crystal Bead Strand A
A. Start hanging the Crystal Bead Strands A1 from the
Referenced Crystal location on the Inner Ring.
Along the dotted line shown on the illustration,
attach one end of Crystal Bead Strand A1 to one
hanger and then attach another end of the Crystal
Bead Strand A1 to corresponding hangers on the
end of the dotted line.
B. Repeat the process to complete the rest Crystal
Bead Strands A.
A1
A2
A3
A4
A5
A6
A7
A8
Socket
G4 Bulb
Figure 7
Referenced
Crystal
A8
A7
A7
A6
A5
A4
A3
A2
A1
A6
A5
A4
A3
A2
A1
Inner Ring
Figure 8
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of8
March2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
STEP 8 - Install Crystal Bead Strand B
A. Start hanging the Crystal Bead Strand B1 from the
Referenced Crystal location on the Second Ring.
Along the dotted line shown on the illustration, attach
one end of Crystal Bead Strand B1 to one hanger and
then attach another end of the Crystal Bead Strand
B1 to corresponding hangers on the end of the dotted
line.
B. Repeat the process to complete the rest Crystal Bead
Strands B.
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
Second Ring
B12
B13
B14
B1
B2
B3
B4
B4
B3
B2
B1
Referenced
Crystal
Figure 9
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B13
B12
B11
B10
B9
B8
B7
B6
B5
C
C
C
STEP 9 - Install Crystal Bead Strand C
A. Attach one end of Crystal Bead Strand C to one
hanger and then attach another end of the Crystal
Bead Strand C to corresponding hangers on the end
of the dotted line.
B. Repeat the process to complete the rest Crystal
Bead Strands C.
Your fixture is now assembled and ready to use.
Enjoy!
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Crystal String C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Figure 10
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Hanger
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.March2014
or visit us on-line at www.quoizel.com
7of8
C
C
C
C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.March2014
or visit us on-line at www.quoizel.com
8of8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.