Quoizel EI8604C User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

..

,.

INSTALLATION INSTRUCTIONS

1. Before beginning the installation, carefully unpack and identify all
parts referring to illustration.

,

2 Turn the electrical power to installation point OFF at circuit

.

breaker

3 Locate the UNIVERSAL CROSSBAR and secure it to the OUTLET

.

BOX with 2) OUTLET BOX SCREWS not supplied

.

(().

UNIVERSAL
CROSSBAR

OUTLET BOX

(2) MOUNTING SCREWS

(2) OUTLET
BOX SCREWS
(not supplied)

FIXTURE SUPPLY
WIRE and
GROUND WIRE

BACKPLATE

SOCKET
COLLAR

SHADE

SOCKET

(2)MOUNTING BALLS

4. Make the connections: Using wire connectors (not supplied), connect

the HOUSE GROUND to the FIXTURE GROUND WIRE attach

;

the HOUSE WHITE WIRE to FIXTURE WHITE (or RIBBED SIDE)
SUPPLY WIRE; connect the HOUSE BLACK (or RED) WIRE to the
FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap each connection
with approved electrical tape.

5. Carefully tuck all wires into the OUTLET BOX and
position the fixture over the outlet box. Align the HOLES in the
BACKPLATE with the 2 MOUNTING SCREWS attached to the
UNIVERSAL CROSSBAR. Pass the fixture over the 2 MOUNTING
SCREWS and secure against by threading 2 MOUNTING BALLS

()

()

()

onto end of screw. Tighten until snug.

6. Position SOCKET through the hole on the bottom center of SHADE.
Secure SHADE by threading SOCKET COLLAR onto SOCKET. Hand
tighten until snug.

7.Install bulbs referring to fixture markings and/or labels for maximum

wattage.

8 Restore power to the installation point ON. Retain this sheet for

.

future reference.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!

IS EI8602

-

2006-9-19