Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-EDS8603WT
For Style EDS8603WT
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wire cutters, wire
strippers,electricaltape,safety glasses.
BulbRecommended: (3) MediumBase100W Maximum (Supplied)
EstimatedAssemblyTime: 20-30minutes
Preparation:Identifyandinspect all partsbeforebeginninginstallation. Check package
contentlistanddiagrams below tobesureall parts arepresent.Ifany parts aremissing
ordamaged,donot attempt toassemble,install,or operate thefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
G
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
Description
Mounting Screw
Lock Washer
Hex Nut
Lock Ball
Fixture Body
Bulb
Socket Collar
Steel Collar
Shade
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
3 pcs.
3 pcs.
3 pcs.
3 pcs.
A
H
B
I
C
D
E
F
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of5
J
August2013
Page 2
EDS8603WT
FINISH: WESTERN BRONZE
23”
2.4mm
13Ga
QUOIZEL
GND
R
7”
4” Dia.
1
7”
10”
7”
.
45”
(3)100W
Medium Base Bulb
(Supplied)
PART NUMBER
NO.
1
G3680SH GLASS SEEDY 3
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
2of5
REQ.
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EDS8603WT
For Style EDS8603WT
STEP 1 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Backplate of the Fixture Body (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
STEP 2 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Mounting
Screw
Crossbar
Hex Nut
Figure 1
Lock Washer
Fixture
Body
Outlet
Box
Backplate
Crossbar
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Mounting
Hole
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of5
Outlet Box
Screw
Figure 2
August2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EDS8603WT
For Style EDS8603WT
STEP 3 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Figure 3
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 4
STEP 4 - Attach Fixture Body to Mounting
Screw
A. Place the Backplate of the Fixture Body (F) over the
Mounting Screws (B) and secure with Lock Ball (E).
Hand tighten until snug.
Mounting Screw
Backplate
Lock Ball
Fixture Body
Figure 5
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of5
August2013
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-EDS8603WT
For Style EDS8603WT
STEP 5 - Attach Shade to Fixture Body
A. Place Shade (J) over the Socket, secure by thread
Socket Collar (H) onto Socket, tighten until snug.
B. Place and Steel Collar (I) over the Socket Collar (H).
Please make sure the gap on the Steel Collar against
the backplate.
Steel Collar
Socket Collar
Shade
Socket
STEP 6 Install Bulb-
A. This fixture uses standard bulb (supplied) with a
standard screw base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 6
Figure 7
Bulb
Socket
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of5
August2013
Loading...