Quoizel DY1533ES User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS DY1533STYLE NUMBER DY1533ES,DY1533VO:
PACKAGE CONTENTS
Part
Crossbar
A
Green Ground Screw
B
Mounting Screw
C
Lock Washer
D
Hex Nut (for Mounting Screw)
E
Mounting Ball
F
6 Rod With Nipple"
G
12 Rod With Nipple"
H
Ceiling Canopy
I
Socket Assembly
J
Shade
K
L
Socket Collar
M
12 Rod"
Description
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
2pcs
1pc
1pc
1pc
1pc
1pc
1pc
Revised 2009-03-05
I
A
B
C
D
E
F
G
M
H
J
K
L
!
WARNINGS AND CAUTIONS
WARNING:
● Befo re beginning the in stal la tion, tu rn off el ectricity at th e circuit breaker box or the ma in fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safe ty. It is very i mportant t hat they are read completely before
the installation of your fixture. We are strongly recommend that a professional electrician install the fixture.
● Di sconnect fixture from t he power source before replacing t he bulb(s), ma king sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
● Befo re beginning in st allation of prod uct, make sure a ll parts are present. Comp ar e parts with p ac kage
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 10 20 minutes
● Tools R equi red for Assembly (not included): Flath ea d s crew driver Phillips scr ewdriver, plier s, electrical
tape, wire cutters, safety glasses &1, 100 Watt, Type A Medium Base Bulb.
● He lp ful Tools (not included): Wire Strippers.
,
-
1 OF 3
INSTALLATION INSTRUCTIONS
STEP 1:
a Determine the Rods to be assembled according to your
.
desired hanging height.
b Pass the Supply Wires with Ground Wire through the
.
chosen Rods and then thread Rods and Socket Assembly
together as shown. Tighten until snug.
6 Rod
"
With Nipple
12” Rod
STYLE NUMBER DY1533ES,DY1533VO:
Supply Wires with
Ground Wire
6 Rod
"
With Nipple
12 Rod
"
With Nipple
Socket Assembly
STEP 2:
a Pass the Supply Wires with Ground Wire through the Swivel
.
and Ceiling Canopy.
b Thread the Swivel onto the top end of the Upper Rod and
.
hand tighten until snug.
STEP 3:
a Screw the Mounting Screws into the Crossbar place the
. ,
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown Secure the
position of the Mounting Screws by tightening the Hex Nuts
against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
.
Screws
.
.
.
Ceiling Canopy
Swivel
Supply Wire with
Ground Wire
Upper Rod
Mounting Screw
Crossbar
Hex Nut
Lock Washer
2 OF 3
Outlet Box
Outlet Box Screw
Loading...