Quoizel DW8701C User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

OUTLET BOX

..

UNIVERSAL
CROSSBAR

,.

BACKPLATE

(2) OUTLET
BOX SCREWS
(not supplied)

INSTALLATION INSTRUCTIONS

1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.

2 Turn the electrical power to installation point OFF at circuit breaker

..

SOCKET COLLAR

STEEL COLLAR

SHADE

SOCKET

3

.

Place the CROSSBAR on the BACKPLATEand align the holes in the
BACKPLATE with a set of threaded holes in the CROSSBAR. Install the
(2) MOUNTING SCREWS in the aligned threaded holes on the
CROSSBAR. Next, mount the CROSSBAR to the outlet box with (2)
OUTLET BOX SCREWS (not provided).

4. :

Make the connections

Use wire connectors(not supplied) connect the HOUSE GROUND to the
FIXTURE GROUNDWIRE attach the HOUSE WHITE WIRE to FIXTURE

WHITE (or RIBBED SIDE) SUPPLYWIRE; connect the HOUSEBLACK

(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap

each connectionwith approved electrical tape.

5. Carefully tuck all wires into the WALLMOUNTED OUTLET BOX and
position the fixture over the outlet box. Align the HOLES in the
BACKPLATE with the 2 MOUNTING SCREWSattached to the
UNIVERSAL CROSSBAR. Pass the fixture over the 2 MOUNTING
SCREWS and secure against by threading 2 MOUNTING BALLS

onto end of screw.Tightenuntil snug.

,

;

()

()

()

(2) MOUNTING SCREWS

FIXTURE SUPPLY WIRE
and GROUND WIRE

(2)MOUNTING BALLS

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!

6. Position the SOCKET through the hole on the bottom of the SHADE.

Locate the STEEL COLLAR over the SOCKET and thread the

SOCKET COLLAR onto the SOCKET to secure them Hand tighten

.

until snug.

7. Install the correct bulb referring to the fixture markings and/or labels for

maximum wattage.

8 Restore power to the installation point ON. Retain this sheet for future

.

reference.

IS DW8701
2007-09 01--