Quoizel DW8604C User Manual

6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com

INSTRUCTION SHEET IS DW8604:STYLE NUMBER DW8604C:

PACKAGE CONTENTS

Part

K L

Crossbar

Green Ground Screw Nipple

Lock Washer

Hex Nut

Lock Ball

Socket Collar

Steel Collar

Bulb Shield

Shade

Bulb Fixture Body

Description

Quantity

1pc

4pcs

1pc

ISSUED 09-2009 Revised 2013-08-23

WARNINGS AND CAUTIONS

WARNING:

●

Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by

switching off the circuit breaker or removing the fuse.

CAUTION:

●

These instructions are provided for your safety. It is very important that they are read completely before

the installation of your fixture. We strongly recommend that a professional electrician install the fixture.

●

Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.

●

Do not touch the bulb with bare hands use a cloth or glove.

PREPARATION

Before beginning installation of product, make sure all parts are present. Compare parts with package

●

contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement part.

●

Estimated Assembly Time : 20 30 minutes

●

Tools Required for Assembly (not included) : Flathead Screwdriver Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety Glasses & 4, 60 Watt, Frosted JCD G9 Bulbs.

●

Helpful Tools (not included) : Wire Strippers.

1OF3

INSTALLATION INSTRUCTIONS

STYLE NUMBER DW8604C:

STEP 1:

Crossbar

a. Secure the Crossbar to the Outlet Box with Outlet Box

Screws Tighten until snug..

Outlet Box

Outlet Box Screw

STEP 2:

Pliers is required on this step

a Thread the Hex Nut onto one end of the Nipple

b Place the Lock Washer over the hex nut end of the

Nipple and then thread the Nipple into the center lock hole of the Crossbar

c Using pliers thread the Hex Nut against the Crossbar

and hand tighten until snug

Crossbar

Hex Nut

Lock Washer

Nipple

STEP 3:

a Locate the Ceiling Canopy onto the Crossbar and slip the

Crossbar

Button Stop on the end of Lanyard into the Slot on the Crossbar as shown.

STEP 4:

*()

Use Wire Connectors not supplied to connect the

wires

a Connect the House Ground Wire to the Fixture Ground

Wire.

.()

b Connect the House White or Ribbed Wire to the

Fixture Supply Wire White or Ribbed Side .

.()

c Connect the House Black or Red Wire to the Fixture

Supply Wire Black or Smooth Side

d Wrap each connection with approved electrical tape and

().

()

carefully stuff all of the connected wires into the Outlet

Box

WHITE OR RIBBED

FROM HOUSE

BLACK OR RED WIRE()

FROM HOUSE

GROUND WIRE GROUND WIRE

FROM HOUSE FROM FIXTURE

Lanyard

Button Stop

Slot

Ceiling Canopy

WHITE OR RIBBED

FROM FIXTURE

BLACK OR SMOOTH

FROM FIXTURE

2OF3

+ 1 hidden pages