Quoizel DW2817C User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS DW2817: STYLE NUMBER DW2817C:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
Crossbar
Green Ground Screw
Lock Washer
Hex Nut
Nipple
Ceiling Canopy
Canopy Lock Ring
Ceiling Canopy Loop
Fixture Chain
Fixture Loop
Stem
Plastic Washer
Flat Washer
Center Column
ShadeAssembly
Diffuser
Cap
Finial
Description
Quantity
1pc
1pc
2pcs
3pcs
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
Revised 2009-08-31
A
B
C
D
E
F
G
H
I
J
N
O
P
!
WARNINGS AND CAUTIONS
WARNING:
Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
●
switching off the circuit breaker or removing the fuse.
CAUTION:
These instructions are provided for your safety. It is very important that they are read completely before
●
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
●
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
EstimatedAssembly Time : 20 30 minutes
●
Tools Required for Assembly (not included) : Flathead Screwdriver Phillips Screwdriver, Pliers,
●
Electrical Tape, Wire Cutters, Safety Glasses &3, 75 Watt, Type - A Medium Base Bulbs.
Helpful Tools (not included) : Wire Strippers.
●
K
L
M
,
Q
R
1 OF 4
INSTALLATION INSTRUCTIONS
STEP 1:
.a Screw the Nipple in the bottom center of the Center
Column into the Hex Coupling on the top center of the
ShadeAssembly.Hand tighten until snug.
b. Thread the Fixture Loop onto the nipple on the top center
of the Center Column and hand tighten until snug.
STYLE NUMBER DW2817C:
Fixture Loop
Center Column
Nipple
Hex Coupling
Shade
Assembly
STEP 2:
a Secure the Crossbar onto the Outlet Box with Outlet
.
Box Screws Tighten until snug
. .
STEP 3:
* .
Pliers is required on this step
. .
a Thread one Hex Nut onto top end of the Nipple
.
b Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar
. ,
c Using pliers thread the Hex Nut against the Crossbar
and hand tighten until snug
.
d Thread another Hex Nut onto the bottom end of the
Nipple
.
.
.
Crossbar
Outlet Box
Crossbar
Outlet Box
Screw
Lock Washer
Hex Nut
Nipple
2 OF 4
Hex Nut
Loading...