Quoizel DI8504C User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
UNIVERSAL
CROSSBAR
(2)OUTLET BOX
SCREWS(not supplied)
SUPPLYWIRE and
GROUND WIRE
BACKPLATE
,.
OUTLET BOX
NIPPLE
LOCK WASHER
HEX NUT
INSTALLATION INSTRUCTIONS
1. Before beginning installation, carefully unpack and identify all
parts referring to the illustration.
2. Turn power to installation point OFF at the circuit breaker.
3. Locate the UNIVERSAL CROSSBAR and secure it to the outlet
with (2) OUTLET BOX SCREWS (not supplied). Thread the end
of the NIPPLE into the center of the CROSSBAR Position the
BACKPLATE over the outlet box Proceed to locate LOCK
WASHERover the NIPPLE and thread the HEX NUT onto the
NIPPLE Pass the mounting hole on the center of the
BACKPLATE over the end of the NIPPLE There should be
enough length protruding from the mounting hole on the
center of the BACKPLATE If the NIPPLE length is not long
enough thread the NIPPLE less into the center of
UNIVERSAL CROSSBAR Remove theBACKPLATE and
snug the HEX NUT against the UNIVERSALCROSSBAR with
pliers to secure the NIPPLE
3. (Quoizel recommends 2 people for
Make the connections:
this step)
Use wire connectors(not supplied) attach the HOUSE GROUND
SOCKET
SHADE
WIRE to the FIXTURE GROUND WIRE connect the HOUSE
WHITE WIRE to FIXTURE WHITE (or RIBBED SIDE) SUPPLY
WIRE; connect the HOUSE BLACK (or RED) WIRE to the
FIXTURE BLACK (or SMOOTH SIDE) WIRE. Wrap each
connection with approved electrical tape.
.
.
.
.
.
,
.
.
;
KNOB
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
SOCKET
COLLAR
4. Carefully tuck all the wires into the outlet box and position the
BACKPLATE over the NIPPLE and secure by threading the
KNOB onto the end of the nipple. Tightenuntil snug.
5. Position the SHADE over the SOCKET as shown. Thread the
SOCKET COLLAR onto the SOCKETand hand tighten until snug
to secure the SHADE.
6.Install bulb referring to fixture markings and/or labels for
maximum wattage.
7.Restore power to the installation point ON. Retain this sheet for
future reference.
IS DI8502
-
2007-02-13
Loading...