Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS DH5005STYLE NUMBER DH5005AN,DH5005PN:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
Crossbar
Green Ground Screw
Hex Nut
Nipple
Lock Washer
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Side Arm
Ceiling Canopy
Fixture Assembly
Fixture Loop
Lock Ball
Socket Collar Tool
Socket Collar
Shade
Fixture Canopy with Stem
Spacer Tube with Bolts
Description
Quantity
1pc
1pc
2pcs
1pc
2pcs
1pc
1pc
1pc
5pcs
1pc
1pc
1pc
10pcs
1pc
5pcs
5pcs
1pc
1pc
ISSUED 12-2008 Revised 2009-05-27
J
A
L
B
C
D
E
F
G
H
I
M
N
O
P
Q
R
!
WARNINGS AND CAUTIONS
WARNING:
● Befo re beginning the in stal la tion, tu rn off el ectricity at th e circuit breaker box or the ma in fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safe ty. It is very i mportant t hat they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Di sconnect fixture from t he power source before replacing t he bulb(s), ma king sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
● Befo re beginning in st allation of prod uct, make sure a ll parts are present. Comp ar e parts with p ac kage
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 30 45 minutes
● Tools R equi red for Assembly (not included): Flath ea d s crew driver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &5, 100 Watt, Type - A Medium Base Bulbs.
● He lp ful Tools (not included): Wire Strippers.
K
,
1 OF 4
Page 2
INSTALLATION INSTRUCTION
STYLE NUMBER DH5005AN,DH5005PN:
STEP 1:
a. Unfold Support Arms to proper locations.
b. Pass the Spacer Tube with Bolts over the bottom end of the
Fixture Canopy with Stem. Thread the end of the Stem into
the Hex Coupling on the top center of the Fixture Assembly.
Hand tighten until snug. Please make sure Bolts on the
side of Spacer Tube and Support Arms are lined up during
assembly.
STEP 2:
a. Thread the Fixture Loop onto the nipple on the top center of
the Fixture Canopy. Hand tighten until snug.
SupportArm
Fixture Canopy
with Stem
Spacer Tube
with Bolts
Hex Coupling
Fixture
Assembly
Fixture Loop
STEP 3:
a. Locate Side Arms. Place the holes on Side Arms over Bolts
on the side of the Spacer Tube and Support Arms. Secure
by threading Lock Balls onto Bolts, hand tighten until snug.
Lock Ball
Side Arm
Lock Ball
Fixture Canopy
Bolt
Spacer
Tube
Bolt
2 OF 4
SupportArm
Page 3
INSTALLATION INSTRUCTION
STEP 4:
a. Secure the Crossbar onto the Outlet Box with Outlet Box
Screws Tighten until snug. .
STEP 5:
*
Plier is required on this step
. .
Thread one Hex Nut onto top end of the Nipple
a
.
Place one Lock Washer over the top end of the Nipple
b
and then thread the Nipple into the center lock hole of
the Crossbar
. ,
Us plier thread the Hex Nut against the rossbar
c ing c
and hand tighten until snug
.
Thread another Hex Nut onto the bottom end of the
d
Nipple
.
.
STYLE NUMBER DH5005AN,DH5005PN:
Outlet Box
Crossbar
Outlet Box
Screw
.
Lock Washer
Crossbar
.
Hex Nut
Nipple
STEP 6:
a Adjust the Fixture Chain to your desired length by
.
removing the links if needed
Please note that depends on chain material thickness
* ,
you might be required to use chain pliers to spread links
open
.
b Pull the supply wires through the Fixture Chain alternating
.
links And then pull the wires through the following
.
components in turn
Canopy Lock Ring Ceiling Canopy Canopy Chain Loop,
Lock Washer and Nipple
c Place Lock Washer over the end of the Nipple and thread
.
:
, ,
, .
the Canopy Chain Loop onto the end of the Nipple
d Using plier thread the Hex Nut against the Canopy Chain
. ,
Loop and tighten until snug
e Attach one end of the Fixture Chain onto the Fixture Loop
.
and attach the another end of the chain onto the Canopy
Chain Loop
f Refer to Step 7 Wire Connections to connect wires
. - .
g Push the Ceiling Canopy upward over the Outlet Box
. .
h Thread the Canopy Lock Ring onto the Canopy Chain Loop
.
.
and tighten until snug to secure the Ceiling Canopy
.
.
.
.
Hex Nut
Nipple
Hex Nut
Lock
Washer
Canopy Chain Loop
Ceiling Canopy
Fixture Chain
Canopy Lock Ring
Fixture Loop
3 OF 4
Page 4
INSTALLATION INSTRUCTION
STEP 7:
* ( )
Use Wire Connectors not supplied to connect the
.
wires
.
a Connect the House Ground Wire to the Fixture Ground
Wire.
. ( )
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
. ( )
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
( ).
( )
carefully stuff all of the connected wires into the Outlet
.
Box
STEP 8:
a Place Shades over Socket as shown. Using Socket Collar
.
Tool, thread Socket Collars onto Sockets and hand tighten
until snug to secure Shades.
STYLE NUMBER DH5005AN,DH5005PN:
WHITE OR RIBBED
FROM HOUSE
BLACK OR RED WIRE( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
Socket Collar Tool
Socket Collar
Socket
STEP 9:
a Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
Shade
4 OF 4
Loading...