Quoizel DCN8603WB User Manual
Assembly Instruction Sheet #IS-DCN8603WB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering June result.
Do not touch the bulb with bare hands use a cloth or glove.
,.
For Style DCN8603WB
ToolsRequired: Flatheadscrewdriver, Phillipsscrewdriver,pliers,wire cutters, wire strippers, electricaltape,
safetyglasses.
BulbRecommended: 3 Frosted Halogen 6( )G9Base G9 bulb, 0W Maximum
EstimatedAssembly Time:20-30minutes
Preparation:Identify and inspect all partsbeforebeginning installation. Check package contentlist and diagrams
belowto be sure all partsarepresent. If any parts aremissing or damaged, do not attemptto assemble, install, or
operatethe fixture. Contact customer serviceforreplacement parts.
Package Contents
Fixture Body
A
x1
Lock Ball
B
x2
Bulb Shield
C
x3
G9 Bulb
D
x3
Socket Collar
E
x3
Steel Collar
F
x3
shade
G
x3
Socket
Collar Tool
H
x1
STEP 1 Install Crossbar-
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included) Tighten until snug
..
Outlet Box
AA
Outlet Box Screw
(not included)
Figure 1
Green Ground Screw
STEP 2 - Wire Connections
Hardware Contents
2.4mm
13Ga
QUOIZEL
GND
side Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
STEP 3 Attach Fixture Body to Mounting Screw-
A. Place the Backplate of the Fixture Body (A) over the Mounting
Screws and secure with Lock Ball (C). Hand tighten until snug.
R
Backplate
Crossbar Assembly
AA
x1
Ribbed side wire
from fixture
Smooth side wire
from fixture
Ground wire
from fixture
C
Figure 2
A
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.
B. Connect White Supply Wire from the Outlet Box to Ribbed side
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
or visit us on-line at www.quoizel.com
1of2
Mounting Screw
Figure 3
January2014
STEP 4 Attach Shade to Fixture
A. Place Shade (G) and Steel
-
Body
Collar (F) over the Socket,
secure by using Socket Collar
Tool (H) thread the Socket Collar
(E) onto Socket. Hand tighten
until snug.
STEP 5 Install Bulb and Bulb
-
Shield
H
E
F
A. This fixture uses frosted G9
halogen bulb with a G9 base.
Maximum 60 watts.
B. Insert bulb and push snugly into
place.
C. Thread the Bulb Shield (C) onto
the Socket. Hand tighten until
G
snug.
Your fixture is now assembled
and ready to use.
Enjoy!
Socket
Figure 4
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Prevent the bulb from contacting liquid or combustible materials.
DCN8603WB
Figure 5
C
D
Socket
FINISH: WEATHERED BRONZE
GND
2.4mm
13Ga
QUOIZEL
R
21”
7”
4.5”
6”
3” Sq.
1
3
3.5”
2
6.5”
(3)60W
Maximum
Frosted Halogen
NO.
G9
(Supplied)
PART NUMBER
I830SF
1
G3424BS
2
G3656SH
3
2014 Quoizel Inc.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BULB 130V 60W HALOGEN G9 FROSTED
BULB SHIELD GLASS BALL 1.56"D X 2"H CLEAR
GLASS ELECTRO PLATED PRESSED
REQ.
3
3
3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2of2
January2014
Loading...