6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-CWN8305IB
For Style CWN8305IB CWN8405IB
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (1)Medium Base 75WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Inner Backplate
B
C
D
Description
Mounting Screw
Shade
Fixture Body
Quantity
1pc.
4 pcs.
1pc.
1pc.
A
C
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
B
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
D
March2013
CWN8305IB
FINISH: IMPERIAL BRONZE
3
5.5”
5”
10”
2
14”
3.5” Dia.
1
(1)75W Medium
Base Bulb
(Not Supplied)
PART NUMBER
NO.
18305IBCWN
1
2
3
G3409SH
M280KTIB
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE IMPERIAL BRONZE CWN8305IB
BUTTERSCOTCH ONEX SHADE
MOUNTING KITS IMPERIAL BRONZE REPLACEMENT
2of4
REQ.
1
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CWN8305IB
For Style CWN8305IB CWN8405IB
STEP 1 - Attach Inner Backplate to Outlet
Box
A. Attach the Inner Backplate (A) to Outlet Box and secure
by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 2 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Outlet Box
Inner Backplate
Mounting Hole
Outlet Box
Screw
Figure 1
Figure 2
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
or visit us on-line at www.quoizel.com
3of4
March2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CWN8305IB
For Style CWN8305IB CWN8405IB
STEP 3 - Attach Fixture Body to Inner
Backplate
Fixture Body
A. Place the backplate of the Fixture Body (D) onto the
Inner Backplate (A). Line up holes on both of them.
Thread Mounting Screws (B) into the mounting holes on
the Inner Backplate (A) and hand tighten until snug to
secure them.
Mounting
STEP 4 Install Bulb and Bulb Shield-
A. Install standard bulb with a standard screw base. Maximum
75 watts.
B. Insert bulb and screw properly into place.
Inner
Backplate
Hole
Mounting Screw
Backplate
Figure 4
Figure 5
Bulb
Socket
STEP 5 Attach Shade to Fixture Body-
A. Place the bottom hole on the Shade (C) over Socket. The
Spring Clips will engage the Shade at the edge of the hole.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
or visit us on-line at www.quoizel.com
4of4
Figure 6
Shade
Fixture Body
Spring Clip
March2013
Loading...