Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
Quoizel, Inc.
strippers,electrical tape, safetyglasses.
6 Corporate Parkway
Goose Creek, SC
29445
BulbRecommended: (8) CandelabraBase60W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax 631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Thank youfor purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. May2013
or visit us on-line at www.quoizel.com
1of8
Page 2
FINISH:
CRE5008FR
FRENCH BRONZE
QUIOZEL
GND
2.4 m m 13 G a
NOTE: TWO LIGHTS SHOWN FOR
ILLUSTRATION PURPOSES ONLY.
5.5” Dia.
1”
Overall Height 125.5”
(Includes 96” Chain)
1
(8) 60W Candelabra
Base Bulbs
(No Supplied)
PART NUMBER
NO.
27”
20.5” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
1
M2301CHFR
CHAIN FRENCH BRONZE 3.8MM X4'
2of8
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
Package Contents
Part
Description
A Crossbar
Nipple
B
Lock Washer
C
Hex Nut
D
Ceiling Canopy
E
Canopy Chain Loop
F
Canopy Lock Ring
G
H
Fixture Chain
Fixture Loop
I
Knurled Nut
J
D35mm Crystal Ball
K
with 2 Beads and Loop
D30mm Crystal Ball
L
with 2 Beads and Hook
D30mm Crystal Ball
M
with 3 Beads and Loop
D35mm Crystal Ball
N
with 3 Beads and Loop
D35mm Crystal Ball
O
with 4 Beads and Loop
D35mm Crystal Ball
P
with 5 Beads and Loop
D35mm Crystal Ball
Q
with 5 Beads and Hook
D40mm Crystal Ball
R
with 4 Beads and Finial
Check Ring
S
Central Assembly
T
Socket Assembly
U
Quantity
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
16 pcs.
16 pcs.
8 pcs.
8 pcs.
8 pcs.
8 pcs.
8 pcs.
1pc.
2 pcs.
1pc.
1pc.
A
B
M
LK
N
O
C
D
P
Q
R
E
S
F
G
H
T
I
J
U
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. May2013
or visit us on-line at www.quoizel.com
3of8
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
STEP 1 Assemble Central Assembly and
-
Socket Assembly together
A. Place one Check Ring (S) over the Center Stem, thread
the Center Stem onto the Socket Assembly (U). Tighten
until snug.
B. Place the CentralAssembly (T) and Check Ring (S) over
the Center Stem, secure by thread the Knurled Nut (J)
onto the Center Stem, hand tighten until sung.
Socket Assembly
Knurled Nut
Check Ring
Central Assembly
Center Stem
Check Ring
STEP 2 - Attach Fixture Loop Assembly to
fixture body
A. Thread Fixture Loop (I) to center stem. Tighten until
snug.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
Figure 1
Figure 2
Fixture Loop
Center Stem
May2013
4of8
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
STEP 3 - Attach Crystal Ball with Beads onto
the Fixture Body
A. Attach D35mm Crystal Ball with 2 Beads and Loop (K)
onto the Scroll on the Side Arm and Scroll on the Bottom
Side Arm. 0 Hook
Lto
( ) the Cup
B. Attach D35mm 3
onto Lower Side Arm .
Attach D3 mm Crystal Ball with 3 Beads and Loop (M)
C. 0
ont Scroll End 1 on the Support Arm.
o
D. Attach D35mm 4 )
onto Scroll End 2 on the Support Arm. 40
Crystal Ball with 4 Beads and Finial (R)
Socket Assembly (U), hand tighten until sung.
E. Attach D35mm Crystal Ball with 5 Beads and Loop (P)
onto croll End 3 on the Support Arm.
Ball with 5 Beads and
Box.
D3 mm Crystal Ball with 2 Beads and
Crystal Ball with Beads and Loop (N)
Crystal Ball with Beads and Loop (O
S
Hook (Q) on the side of Junction
Thread D mm
on the bottom of
D35mm Crystal
Scroll End 3
D35mm Crystal Ball
with 3 Beads and Loop
D40 mm Crystal Ball
with 4 Beads and Finial
Side Arm
Scroll
D35mm Crystal Ball
with 2 Beads and Loop
Bottom Side Arm
Scroll
D35mm Crystal Ball
with 2 Beads and Loop
Lower Side Arm
Scroll End 1
D35mm Crystal Ball
with 4 Beads and Loop
D35mm Crystal Ball
with 5 Beads and Loop
D35mm Crystal Ball
with 5 Beads and Loop
Figure 3
Cup
Support Arm
D30mm Crystal
Ball with 2 Beads
and Hook
Scroll End 2
D30mm Crystal
Ball with 3 Beads
and Loop
STEP 4 - Attach Crossbar to Outlet Box
Figure 4
Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Crossbar
Mounting
Hole
Outlet Box
Screw (not
Supplied)
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. May2013
or visit us on-line at www.quoizel.com
5of8
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
STEP 5 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 5
STEP 6 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (F) and hand tighten until snug.
STEP 7 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop (F) and tighten until snug to secure the
Ceiling Canopy (E).
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
Canopy
Chain Loop
Figure 6
Outlet Box
Canopy Chian Loop
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Ceiling Canopy
Canopy
Lock Ring
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of8
Figure 7
May2013
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
STEP 8 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (H) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (H) onto the
Canopy Chain Loop (F) and then attach the other end of
the Fixture Chain (H) onto the Fixture Loop on the top of
the Fixture Loop Assembly (J).
STEP 9 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (H) alternating links. Push the wires up
through the Canopy Chain Loop (F) into the outlet box.
Fixture Loop
Figure 8
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Canopy Chain
Loop
Fixture Chain
Supply Wire
and Ground Wire
Figure 9
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. May2013
or visit us on-line at www.quoizel.com
7of8
Page 8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CRE5008FR
For Style CRE5008FR
STEP 10 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H).
B. Push all slack fixture wire through Canopy Chain Loop (F)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 7.
Supply Wire
and Ground
Wire from
Outlet Box
Supply Wire and
Ground Wire
Canopy Chain Loop
Fixture Chain
Ceiling Canopy
Canopy Lock Ring
White wire from supply Ribbed side
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
wire from fixture
Smooth side
wire from fixture
Figure 10
STEP 11 - Install Bulb
A. This fixture uses standard bulbs with a standard screw
base. Maximum 60 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 11
Figure 12
Bulb
Socket
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. May2013
or visit us on-line at www.quoizel.com
8of8
Loading...