6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
WALL SURFACE MOUNTED OUTDOOR FIXTURE
CAULKING INSTRUCTIONS
1 Refer to FIGURE2 For assemble the MOUNTING BALLS please note that you are
.( ) ,
required to apply a small amount of Silicone sealer to the threaded side of the
MOUNTING BALLS and then install them onto the MOUNTING SCREWS
.
FIGURE1
EXTERIOR GRADE
CAULK
OUTDOOR
FIXTURE BACKPLATE
.)
2 (Refer to FIGURE1
With theOUTDOOR FIXTURE properly installed in accordance with
supplied Assembly/installation instructions, proceed with caulking instructions below.
Note: Be sure EXTERIOR WALLSURFACE and FIXTURE BACKPLATEare free to dirt to
caulking. Using EXTERIOR GRADE CAULK, start on one side of FIXTURE BACKPLATEand
follow contour, were the FIXTURE BACKPLATE meets the EXTERIOR WALL SURFACE
upward. Proceed to caulk over top of backplate and down other side.
BOTTOM OF FIXTURE BACKPLATE
to ensure proper moisture drainage.
DO NOT CAULK
FIGURE2
EXTERIOR GRADE
CAULK
EXTERIOR WALL SURFACE
MOUNTING BALL
IS 727
Revised 2008 01 31
-
--