Quoizel CKTH1483T User Manual

6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com
..
,.
Assembly Instruction Sheet #IS-CKTH1483T
For Style CKTH1483T
Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445
Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com
ToolsRequired:None
BulbRecommended: (1) Medium Base 100W Maximum EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
Package Contents
Description
Finial
Rubber Washer
Shade
Harp
Fixture Body
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
A
B
E
C
D
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
September 2012
1of3
CKTH1483T
FINISH: CUSTOM
18”12”
1
11.5”
32.5”
2
16.5”
(1)100W
Medium Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
11483TCKTH
2
3
S1436TN
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
BASE FOR CKTH1483T
SHADE TAN 18"W
REPLACEMENT PART DESCRIPTION
REQ.
1
1
2of3
6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com
..
,.
Assembly Instruction Sheet #IS-CKTH1483T
For Style CKTH1483T
STEP 1 - Install Harp
A. Locate the Harp (D) by pressing the ends of the Harp
(D) into the Harp Clips on the top of Base (E).
STEP 2 Assemble Shade-
A. Place Shade (C) and Rubber Washer (B) over the top
end of the Harp (D). Secure by thread the Finial (A) onto the Harp (D). Hand tighten until snug.
Figure 1
Harp
Harp Clip
Base
Finial
Rubber Washer
Shade
STEP 3 Install Bulb-
A. This fixture uses standard bulbs with medium screw
bases. Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Harp
Figure 2
Bulb
Socket
Figure 3
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
September 2012
3of3
Loading...