Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-CKCF2822OS
For Style CKCF2822OS
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (4) Medium Base 100W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Ceiling Canopy
6” Rod
6” Rod with Nipple
12” Rod
Shade Assembly
Hex Nut (1/8 IP)
Small Plastic Washer
Big Plastic Washer
Diffuser
Big Flat Washer
Finial
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
A
F
G
B
C
D
E
K
L
M
H
O
I
J
N
P
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
1of6
December2012
Page 2
CKCF2822OS
FINISH: OLD SILVER
2.4mm
13Ga
5.5” Dia.
6”
GND
QUOIZEL
R
OVERALL HEIGHT
INCLUDES
(2) 6” AND 12” RODS
3
1”
TOP VIEW
49”
12”
(4)100W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
10”
2
22” Dia.
1
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
1
2
3
G147DI DIFFUSER FROSTED GLASS 20.25"D 1
9012EXOS ROD EXT OLD SILVER 12"L x 0.5” 2
9006EXOS ROD EXT OLD SILVER 6"L x 0.5” 2
2of6
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CKCF2822OS
For Style CKCF2822OS
STEP 1 Assemble Rods-
A. Determine the Rods (G/H/I) to be assembled to the Shade
Assembly (J) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H/I) and then thread the chosen Rods (G/H/I) and
the Shade Assembly (J) together. Hand tighten until snug.
6” Rod
6” Rod
with Nipple
12” Rod
12” Rod
STEP 2 Assemble Ceiling Canopy to Upper
-
Rod
A. Pass Supply Wires and Ground Wire through the Ceiling
Canopy (F) and then thread the Ceiling Canopy (F) and
the Upper Rod together. Hand tighten until snug.
Shade
Assembly
Supply Wire and
Ground Wire
Figure 1
Ceiling
Canopy
Supply Wire and
Ground Wire
Upper Rod
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Figure 2
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
3of6
December2012
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CKCF2822OS
For Style CKCF2822OS
STEP 3 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Crossbar
Hex Nut
Figure 3
STEP 4 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 5 Attach Lanyard-
A. The purpose of the lanyard is to provide the installer a
means to support the fixture from the junction box while
connecting the electrical wires. This enables the fixture
to hang from the junction box and your hands are free to
make the wire connections.
B. TurntheButtonStopsoitmaybeinsertedintothe
crossbar slot. Make sure the Button Stop is completely
inside the crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop. Proceed to the
wiring steps. Once you are complete with the wiring
there is nothing to do with Lanyard. The Lanyard will
push into the junction box when the fixture is placed for
final mounting.
Figure 4
Mounting
Hole
Crossbar
Outlet
Box
Crossbar
Outlet Box
Screw
Figure 5
Slot
Button Stop
Lanyard
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
4of6
December2012
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CKCF2822OS
For Style CKCF2822OS
STEP 6 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Figure 7
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 6
STEP 7 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy (F) over the Mounting Screws
(B) and secure with Mounting Balls (E). Hand tighten
until snug.
Ceiling Canopy
Figure 8
Mounting Screw
Mounting Ball
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
5of6
December2012
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-CKCF2822OS
For Style CKCF2822OS
STEP 8 Assemble Diffuser-
A. Pass the Small Plastic Washer (L), the Diffuser (N), the
Big Plastic Washer (M) and the Big Flat Washer (M)
over the end of the Center Stem as shown. Secure by
threading the Hex Nut (1/8 IP) (K) onto the Center
Stem. Hand tighten until snug.
STEP 9 Assemble Finial-
A. Thread the Finial (P) onto the Center Stem and hand
tighten until snug.
Small Plastic
Washer
Big Plastic Washer
Big Flat Washer
Hex Nut (1/8 IP)
Figure 9
Center Stem
Diffuser
STEP 10 - Install Bulb
A. This fixture uses standard bulb with a standard screw
base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use. Enjoy!
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
or visit us on-lineat www.quoizel.com
6of6
Center Stem
Figure 10
Finial
Figure 11
Socket
Bulb
December2012
Loading...