Preparation:Identify and inspect all partsbefore beginning installation. Check package
contentlist and diagrams below tobe sure all parts are present. Ifany parts are missing
ordamaged, do not attempt toassemble, install, or operate the fixture. Contactcustomer
servicefor replacement parts.
Assembly Instruction Sheet #IS-BRX1619C
For Style BRX1619C
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering June result.
Do not touch the bulb with bare hands use a cloth or glove.
Package Contents
Part
AInner Backplate
B
C
D
E
F
G
H
I
J
K
Description
Washer
Fixture Body
Bulb
Crystal 3.63"L Part A
Crystal 5"L Part B
Crystal 5.63"L Part C
Crystal 6.25”L Part D
Wall Anchor
Self-tapping Screw
Mounting Ball
Quantity
1pc.
4 pcs.
1pc.
5 pcs.
18 pcs.
12 pcs.
6 pcs.
1pc.
4 pcs.
4 pcs.
4 pcs.
A
B
C
D
H
E
F
G
I
J
K
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you forpurchasingaQuoizel product.
or visit us on-line at www.quoizel.com
1of4
March2014
Page 2
BRX1619C
FINISH: POLISHED CHROME
19.5” Dia.
17.5” Dia.
9”
2
3
4
5
A
A
A
B
B
A
B
A
C
B
A
C
B
C
D
C
A
B
A
B
A
A
B
A
B
C
A
B
C
A
A
18PCS
B
12PCS
C
6PCS
B
A
B
A
1
D
1PC
(5) 40W
clear G9 Xenon
NO.
1
2
3
4
5G3775CR
Maximum
(Supplied)
PART NUMBER
I1202SCBULB 40W XENON G9 CLEAR5
G3772CR
G3773CR
G3774CR
A
A
A
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
DECORATIVE CRYSTAL BALL 3.63"L PART "A"
DECORATIVE CRYSTAL BALL 5"L PART "B"
DECORATIVE CRYSTAL BALL 5.63"L PART "C"
DECORATIVE CRYSTAL BALL 6.25"L PART "D"
2of4
REQ.
18
12
6
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BRX1619C
STEP 1 - Attach Inner Backplate to
Outlet Box
A. Place the Inner Backplate (A) onto the ceiling
and line up one set of holes onto mounting
holes on Outlet Box. Using a pencil, mark the
locations for Wall Anchors (I).
B. Remove the Inner Backplate (A) and drill holes
from the marks and then push the Wall Anchors
(I) into the holes.
C. Position the Inner Backplate (A) back onto the
Ceiling. Thread the Outlet Box Screws (not
supplied) into the mounting holes on the Outlet
Box to secure it. Hand tighten until snug.
D. Pass the Washers (B) over the Self-tapping
screws (J) and then thread the self-tapping
screws (J) into the Wall Anchors (I). Hand
tighten until snug.
For Style BRX1619C
Wall
Anchor
Figure 1
CEILING
Outlet Box
Screw
Outlet
Box
Mounting
Hole
Inner
Backplate
Washer
Self-tapping
Screw
STEP 2Remove the Protective film-
A. Remove the Protective Film for Fixture Body (C).
Fixture Body
STEP 3Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 2
Protective film
Figure 3
White wire from supply
Black wire from supply
(or Red)
Ground wire from supply
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
White wire from fixture
Black wire from fixture
Ground wire from fixture
Figure 4
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
March2014
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BRX1619C
For Style BRX1619C
STEP 4Attach Fixture Body to Mounting
-
Screw
A. Place the Fixture Body (C) over the Mounting Screws
and secure with Mounting Balls (K). Hand tighten until
snug.
STEP 5 - Install Bulb
A. This fixture uses Frosted G9 Xenon Bulbs. Maximum 40
watts.
B. Insert bulb and seat properly into place.
IMPORTANT:
Do not touch the bulb with bare hands use
a cloth or glove.
STEP 6 - Install Crystal to Fixture
A. Insert(H) to the hole on the
center of Ceiling Canopy,
the hole on the ring C of, Crystal 5"L
Part B (F) to the hole on the ring B of,
Crystal 3.63"L Part A (E) to the hole on the outside
ring of.
Your fixture is now assembled and ready to use.
Enjoy!
Crystal 6.25”L Part D
Crystal 5.63"L Part C (G) to
Ceiling Canopy
Ceiling Canopy
Ceiling Canopy
A
A
Mounting
Screw
A
A
B
B
B
A
A
Crystal 6.25”L
Part D
A
A
B
C
C
B
A
A
A
B
B
C
B
C
D
B
C
B
C
B
B
A
A
A
Figure 5
Inner
Backplate
Fixture Body
Mounting Ball
Figure 6
Socket
Bulb
Ceiling
Canopy
Crystal 5"L
Part B
A
B
C
A
A
A
A
D
Crystal 5.63"L
Part C
Crystal 3.63"L
Part A
Figure 7
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.March2014
or visit us on-line at www.quoizel.com
4of4
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.