Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Tools Required: Flatheadscrewdriver,Phillips screwdriver, pliers, wirecutters, wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (4)G9 Base G9Xenon bulb,40W Maximumclear
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Assembly Instruction Sheet #IS-BRX1612C
For Style BRX1612C
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering June result.
Do not touch the bulb with bare hands use a cloth or glove.
A
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
Description
Mounting Ball
Fixture Body
Bulb
Crystal 3.63"L Part A
Crystal 5"L Part B
Crystal 5.63"L Part C
Self-tapping Screw
Wall Anchor
Washer
Quantity
1pc.
2 pcs.
1pc.
4 pcs.
12 pcs.
6 pcs.
1pc.
2 pcs.
2 pcs.
2 pcs.
B
C
D
H
E
F
G
I
J
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
November2013
Page 2
BRX1612C
FINISH: POLISHED CHROME
1”
7.5”
12”Dia.
10”Dia.
GND
2.
1
Q
3 Ga
4 mm
U
O
I
Z
E
L
2
3
(4)40W
Maximum
clear G9 Xenon
(Supplied)
4
A
A
A
B
B
A
C
B
A
B
A
A
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
A
A
B
A
A B C
12pcs
6pcs 1pc
B
A
A
1
PART NUMBER
NO.
1
2
3
4
G3772CR
G3773CR
G3774CR
REPLACEMENT PART DESCRIPTION
REQ.
I1202SC BULB 40W XENON G9 CLEAR 4
DECORATIVE CRYSTAL BALL 3.63"L PART "A"
12
DECORATIVE CRYSTAL BALL 5"L PART "B"
DECORATIVE CRYSTAL BALL 5.63"L PART "C"
2of4
6
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BRX1612C
For Style BRX1612C
STEP 1 - Attach Inner Backplate to Outlet
Box
A. Place the Crossbar (A) onto the Ceiling surface and line
up one set of holes onto mounting holes on Outlet Box.
Using a pencil, mark the locations for Wall Anchors (I).
B. Remove the Crossbar (A) and drill holes from the marks
and then push the WallAnchors (I) into the holes.
C. Position the Crossbar (A) back onto the Ceiling. Thread
the Outlet Box Screws (not supplied) into the mounting
holes on the Outlet Box to secure it. Hand tighten until
snug.
D. Pass the Washers (J) over the Self-tapping screws (H)
and then thread the self-tapping screws (H) into the
Wall Anchors (I). Hand tighten until snug.
STEP 2 Remove the Protective film-
A. Remove the Protective Film for Fixture Body (C).
Fixture Body
Ceiling
Outlet Box
Screw
Outlet
Box
Mounting
Hole
Figure 1
Wall Anchor
Crossbar
Washer
Self-tapping
Screw
Figure 2
Protective film
STEP 3 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Figure 4
Black wire from fixture
Figure 3
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
November2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BRX1612C
For Style BRX1612C
STEP 4 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy over the Mounting Screws
and secure with Mounting Balls (B). Hand tighten until
snug.
STEP 5 - Install Bulb
A. This fixture uses Frosted G9 Xenon Bulbs. Maximum 40
watts.
B. Insert bulb and seat properly into place.
IMPORTANT:
Do not touch the bulb with bare hands use
a cloth or glove.
STEP 6 - Install Crystal to Fixture
A. Insert (G) to the hole on the
center of Ceiling Canopy,
hole in the middle ring of , Crystal
3.63"L Part A (E) to the hole on the outside ring of
Ceiling Canopy
Your fixture is now assembled and ready to use.
Enjoy!
Crystal 5.63"L Part C
Crystal 5"L Part B (F) to the
Ceiling Canopy
.
A
A
A
Mounting
Ceiling
Canopy
A
A
B
C
B
A
Screw
B
B
A
Crystal 5.63"L
A
Part C
A
B
A
B
A
A
B
C
Crystal 3.63"L
Part A
Figure 5
Crossbar
Mounting
Ball
Figure 6
Socket
Bulb
Ceiling
Canopy
Crystal 5"L
Part B
A
Figure 7
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. November2013
or visit us on-line at www.quoizel.com
4of4
Loading...