6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-BGT8603BN
For Style BGT8603BN
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (3) Medium Base Bulbs 100W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A
G
Package Contents
H
Part
A Crossbar
B
C
D
E
F
G
H
I Shade
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Fixture Body
Finial
Socket Collar
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
2 pcs.
3 pcs.
3 pcs.
B
I
C
D
E
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
F
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of5
March 2013
BGT8603BN
FINISH: BRUSHED NICKEL
2.4mm
13Ga
QUOIZEL
GND
R
27”
1
5.5”
10”
5”
2
6” Dia.
9”
(3)100W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
18603BNBGT
1
2
G3519SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE BRUSHED NICKEL BGT8603BN
GLASS SHADE CLEAR OPAL
2of5
REQ.
1
3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BGT8603BN
STEP 1 - Attach Finial to Fixture Body
A. Insert the Finials (G) to the ends of the Rods.
For Style BGT8603BN
Fixture Body
Finial
STEP 2 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Backplate.
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
STEP 3 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Crossbar
Mounting
Screw
Rod
Figure 1
Lock Washer
Hex Nut
Figure 2
Outlet
Box
Backplate
Crossbar
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Mounting
Hole
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of5
Outlet Box
Screw
Figure 3
March 2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BGT8603BN
For Style BGT8603BN
STEP 4 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Figure 4
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 5
STEP 5 - Attach Fixture Body to Mounting
Screw
A. Place the Backplate over the Mounting Screws (B) and
secure with Mounting Balls (E). Hand tighten until snug.
Mounting Screw
Backplate
Mounting Ball
Figure 6
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of5
March 2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-BGT8603BN
For Style BGT8603BN
STEP 6 Install Shade-
A. Place the Shade (I) over the Socket and secure with the
Socket Collar (H). Hand tighten until snug.
Socket
Shade
Socket
Collar
Figure 7
STEP 7 - Install Bulb
A. This fixture uses standard bulb with a standard screw base.
Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use. Enjoy!
Bulb
Socket
Figure 8
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of5
March 2013
Loading...