Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ALZ2823PN
For Style ALZ2823PN
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
Quoizel, Inc.
strippers,electrical tape, safetyglasses.
6 Corporate Parkway
Goose Creek, SC
29445
BulbRecommended: (4)Medium Base Bulbs100WMaximum,Alternate(4) 23W CFL.
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax 631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of8
August2014
Page 2
ALZ2823PN
FINISH: PALLADIAN BRONZE
6.5 Dia.
4
1.5"
Overall Height 80.5”
(Includes 48” Chain)
2
1
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBER
NO.
29.5"
6.5"
5
3
20" Dia.
22.5" Dia.
REPLACEMENT PART DESCRIPTION
REQ.
(4)100W Medium
Base Bulbs
(Not Supplied)
12823PNALZ BASE
1
2
M381CHPN CHAIN
M2333FIPN FINIAL
3
4
5
8822KIT MOUNTING KIT & CANOPY
G2971SH SHADE
1
1
1
1
1
2of8
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ALZ2823PN
For Style ALZ2823PN
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
Description
Nipple
Lock Washer
Hex Nut
Ceiling Canopy
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Fixture Loop
Fixture Assembly
Shade Holder
Shade
Spacer Tube
Check Ring
Flat Washer
Rubber Washer
Stem
Cap
Finial
Quantity
1pc.
1pc.
2 pcs.
4 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
M
N
O
P
A
B
C
I
D
E
J
K
F
G
H
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Q
R
S
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of8
L
August2014
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
STEP 1 Adjust Fixture Assembly-
,.
Assembly Instruction Sheet #IS-ALZ2823PN
For Style ALZ2823PN
A. Unfold support arms on fixture assembly to proper
locations.
STEP 2 - Attach Fixture Loop to Fixture
Assembly
A. Thread the Fixture Loop (I) onto the nipple on the top
center of the FixtureAssembly (J). Hand tighten until
snug.
Figure 1
Figure 2
Fixture Loop
Fixture
Assembly
STEP 3 - Attach Stem
A. Thread the short threaded end of the Stem (Q) into the
hex coupling underside of the
Tighten until snug.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Fixture Assembly (J).
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of8
Figure 3
Fixture
Assembly
Stem
August2014
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ALZ2823PN
For Style ALZ2823PN
STEP 4 - Attach Shade
A. Pass the (M), the (N), the
Washer , the Rubber Washer ( ),the ( ), the
Rubber Washer (P), the Flat Washer (O)
end of the Stem (Q). Secure by threading the hex nut
(D) onto the Stem (Q). Hand tighten until snug.
Spacer Tube Check Ring Flat
(O) P Shade L
and over the
Figure 4
Stem
Spacer Tube
Shade Holder
Check Ring
Flat Washer
Rubber Washer
Shade
Rubber Washer
Flat Washer
Hex Nut
STEP 5 - Attach Cap and Finial
A. Place the Cap (R) over the stem extruding from the
bottom of the Shade (L) and secure with the Finial (S).
Hand tighten until snug.
STEP 6 - Attach Crossbar to Outlet Box
A. Secure the Corssbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Mounting
Hole
Cap
Finial
Shade
Figure 5
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of8
Figure 6
August2014
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ALZ2823PN
For Style ALZ2823PN
STEP 7 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 7
STEP 8 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (F) and hand tighten until snug.
STEP 9 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop (F) and tighten until snug to secure the
Ceiling Canopy (E).
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
Canopy
Chain Loop
Figure 8
Outlet Box
Canopy Chian Loop
Ceiling Canopy
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Canopy
Lock Ring
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of8
Figure 9
August2014
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ALZ2823PN
For Style ALZ2823PN
STEP 10 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (H) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (H) onto the
Canopy Chain Loop (F) and then attach the other end of
the Fixture Chain (H) onto the Fixture Loop (I) on the
top of the fixture.
STEP 11 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (H) alternating links. Push the wires up
through the Canopy Chain Loop (F) into the outlet box.
Fixture Loop
Figure 10
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Canopy Chain
Loop
Fixture Chain
Supply Wire
and Ground Wire
Figure 11
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of8
August2014
Page 8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ALZ2823PN
STEP 12 - Make Wire Connections
For Style ALZ2823PN
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H).
B. Push all slack fixture wire through Canopy Chain Loop (F)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 5.
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Supply Wire
and Ground
Wire from
Outlet Box
Supply Wire and
Ground Wire
Canopy Chain Loop
Fixture Chain
Ceiling
Canopy
Canopy Lock Ring
Figure 12
Ground wire from supply Ground wire from fixture
Figure 13
STEP 13 Install Bulb-
A. This fixture uses standard bulb with a standard screw
base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your lamp wall fixture is now assembled and ready to
use. Enjoy!
Figure 14
Bulb
Socket
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
8of8
August2014
Loading...