Page 1
Assembly Instruction Sheet #IS-ADS639DC
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
,.
Tools Required:Flathead screwdriver, Phillipsscrewdriver, pliers,wire cutters,wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (6) CandelabraBase Maximum60W
EstimatedAssemblyTime:30-45 minutes
Preparation:Identify and inspectall parts before beginninginstallation. Check package
contentlist and diagramsbelow to be sureall parts arepresent.If any partsare missing
ordamaged, do notattempt to assemble, install,or operate thefixture.Contact customer
servicefor replacement parts.
Warnings and Cautions
For Style ADS639DC
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Need assistance with parts or assembly?Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizelproduct.
or visit us on-line at www.quoizel.com
1of7
September2011
Page 2
ADS639DC
FINISH: DARK CHERRY
Overall Height 56”
(Includes (2) 6” Rods
and (2) 12” Rods)
6”
8”
1”
12”
19”
(6)60W Candelabra
base bulbs
(not Supplied)
2
1
3
5.5”
39”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
4” Dia.
3” Dia.
4.5”
PART NUMBER REPLACEMENT PART DESCRIPTION
NO.
1
2
3
G2940SH
G2939SH
SHADE CLEAR WATER GLS 5.5"H
SHADE OPAL ETCHED GLS 4.5"H
2of7
REQ.
1M2300FIDC FINIAL DARK CHERRY 0.5"D
6
6
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS639DC
For Style ADS639DC
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Description
Nipple
Lock Washer
Hex Nut
Lock Ball
Socket Collar
Shade Holder A
Shade Holder B
Ceiling Canopy
Socket Collar Tool
6” Rod
12” Rod
Fixture Assembly
Shade A
Shade B
Quantity
1pc.
1pc.
4 pcs.
4 pcs.
1pc.
6 pcs.
6 pcs.
6 pcs.
1pc.
1pc.
4 pcs.
4 pcs.
1pc.
6 pcs.
6 pcs.
A
B
I
C
J
D
E
F
G
H
K
L
M
Need assistance with parts or assembly?Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
N
Thank you for purchasing a Quoizelproduct.
or visit us on-line at www.quoizel.com
3of7
O
September2011
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
STEP 1 Assemble Rods-
,.
Assembly Instruction Sheet #IS-ADS639DC
For Style ADS639DC
A. Determine the Rods (K/L) to be assembled according to
your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (K/L). Thread the chosen Rods (K/L) and the Fixture
Assembly (M) together. Hand tighten until snug.
6” Rod
12” Rod
6” Rod
12” Rod
Supply Wires
and Ground
Wire
Fixture Assembly
STEP 2 Assemble Ceiling Canopy-
A. Pass the Supply Wires and Ground Wires through the
Ceiling Canopy (I), Lock Washer (C) and Hex Nut (D).
B. Place the Ceiling Canopy (F) and Lock Washers (C) over
the nipples on the top ends of Upper Rods and secure with
Hex Nuts (D). Tighten until snug.
Thank you for purchasing a Quoizelproduct.
Need assistance with parts or assembly?Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
or visit us on-line at www.quoizel.com
4of7
Figure 2
Figure 1
Hex Nut
Lock
Washer
Ceiling Canopy
Supply Wire
and Ground
Wire
Upper Rod
September2011
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS639DC
For Style ADS639DC
STEP 3 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
STEP 4 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Figure 3
Mounting
Hole
Figure 4
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Crossbar
Lock Washer
Hex Nut
Nipple
Need assistance with parts or assembly?Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizelproduct.
or visit us on-line at www.quoizel.com
5of7
September2011
Page 6
Assembly Instruction Sheet #IS-ADS639DC
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
STEP 5 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
,.
For Style ADS639DC
Figure 5
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 6
STEP 6 Install Ceiling Canopy-
A. Thread another Hex Nut (D) onto the end of the Nipple
(B). Place the Lock Washer (C) over the end of the
Nipple (B) and then pass the Ceiling Canopy (I) over the
end of the Nipple (B). Secure by threading the Lock Ball
(E) onto the Nipple (B). Hand tighten until snug.
Ceiling
Canopy
Figure 7
Crossbar
Nipple
Hex Nut
Lock Washer
Lock
Ball
Need assistance with parts or assembly?Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizelproduct.
or visit us on-line at www.quoizel.com
6of7
September2011
Page 7
Assembly Instruction Sheet #IS-ADS639DC
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
STEP 7 Assemble Shades-
A. Place ShadesA and B (N/O), Shade Holder A and B (G/H)
over the Socket as shown. By using the Socket Collar Tool
(J), thread the Socket Collar (F) onto the Socket to secure
above parts. Hand tighten until snug.
,.
For Style ADS639DC
Socket Collar Tool
Socket Collar
Shade Holder A
Shade A
Shade Holder B
Shade B
Socket
Figure 8
STEP 8 - Install Bulb
A. bulb with a candelabra screw
This fixture uses candelabra
base 0
. Maximum 6 watts.
B. Insert bulb and screw snugly into place.
Your fixture chandelier lamp is now assembled and ready
to use. Enjoy!
Socket
Bulb
Figure 9
Need assistance with parts or assembly?Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizelproduct.
or visit us on-line at www.quoizel.com
7of7
September2011
Loading...