BulbRecommended: (2)Medium Base 60WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of8
May2012
Page 2
ADS1615DC
FINISH: DARK CHERRY
3
15” Dia.
9”
4
5”
10” Dia.
12” Dia.
1
6”
2
(2)60W medium
base bulbs
(not Supplied)
PART NUMBER
NO.
11615DCADSBASE DARK CHERRYADS1615DC
1
M2299FIDC
2
3
4
9513KIT
G2929PA
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
FINIAL DARK CHERRY 0.66"D
MTG HARDWARE 4"D
PANEL CLEAR WATER GLS/OUTSIDE
2of8
REQ.
1
1
1
3
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
Package Contents
Part
ACrossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
Description
Nipple
Lock Washer
Hex Nut
Hex Coupling
Check Ring
Flat Washer
Rubber Washer
Ceiling Canopy
Long Nipple
Shade
Spacer Tube
Glass Panel
Cap
Finial
Cage
Fixed Stay
Lock Screw
Flat Head Screw
Lock Block
Cover
Quantity
1pc.
1pc.
2 pcs.
3 pcs.
1pc.
2 pcs.
1pc.
2 pcs.
1pc.
1pc.
1pc.
1pc.
3 pcs.
1pc.
1pc.
1pc.
3 pcs.
3 pcs.
3 pcs.
3 pcs.
1pc.
A
B
C
J
D
E
F
G
H
L
N
O
I
K
M
P
Q
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.May2012
or visit us on-line at www.quoizel.com
3of8
R
T
S
U
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
STEP 1 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
STEP 2Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Figure 1
Outlet Box
Mounting Hole
Crossbar
Outlet Box Screw
(not Supplied)
Figure 2
Crossbar
Lock Washer
Hex Nut
Nipple
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.May2012
or visit us on-line at www.quoizel.com
4of8
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
STEP 3Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supplyWhite wire from fixture
Figure 3
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 4
STEP 4 - Attach Ceiling Canopy to Outlet Box
A. Thread one Hex Nut (D) onto the end of the Nipple (B).
Adjust the Hex Nut (D) to proper location so that it is
against the inside surface of the Ceiling Canopy(I).
B. Place the Ceiling Canopy (I) and one Check Ring (F)
and one Lock Washer (C) over the Nipple (B) as shown.
Secure by threading the Hex Coupling (E) onto the
Nipple (B). Hand tighten until snug.
Figure 5
Hex Nut
Nipple
Outlet Box
Ceiling Canopy
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of8
Check Ring
Lock Washer
Hex Coupling
May2012
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
STEP 5 - Install Bulb
A.bulb with a standard screw
This fixture uses medium
base0
. Maximum 6 watts.
B. Insert bulb and screw snugly into place.
Socket
STEP 6Assemble Glass Panels-
A. Place the Glass Panels (M) between two Bars inside of
the Cage (P).
(
B.Refer to Figure 8) Locate the Slots on the Fixed Stay
(Q) over the Bar inside of the Cage (P).And then pull
the Fixed Stay (Q) up until the slots is caught in the
beveled end of the Bar.
Fixed
Stay
Cage
Bar
Pull up
Fixed
Stay
Bulb
Figure 6
Fixed
Stay
Glass
Panel
Bar
Cage
Figure 7
Figure 8
STEP 7Attach Shade-
A. Place the Shade (K) inside of the Cage (P) as shown.
Figure 9
Shade
Cage
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.May2012
or visit us on-line at www.quoizel.com
6of8
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
STEP 8Assemble Lock Blocks-
A. Attach the Lock Block (T) to the top end of the Fixed
Stay (Q). Match the hole on the Lock Block (T) to the
mounting hole on the top end of the Fixed Stay (Q) and
match the mounting hole on the end of the Lock Block
(T) to the hole on the top edge of the Cage (P).
B. Thread the Lock Screw (R) into the Mounting Hole on
the top end of the Fixed Stay (Q) and thread the Flat
Head Screw (S) into the mounting hole on the end of the
Lock Block (T). DO NOT tighten them at this moment.
C. With one hand press the Fixed Stay (Q) against the
Cage, tight the Lock Screw (R) into the Fixed Stay (Q)
and tight the Flat Head Screw (S) with screwdrivers.
STEP 9 - Attach Shade to Ceiling Canopy
A. Screw one end of the Long Nipple (J) into the Hex
Coupling (E) underside of the Ceiling Canopy (I). Hand
tighten until snug.
B. Pass the following components over the end of the
Long Nipple (J) in turn.
The Spacer Tube (L), the Check Ring (F), the Cover (U),
Rubber Washer (H), the Cage with Shade, the Rubber
Washer (H) and the Flat Washer (G).
Secure by threading the Hex Nut (D) onto the Long
Nipple (J). Hand tighten until snug.
Lock Block
Cage
Long Nipple
Cover
Rubber Washer
Lock
Screw
Flat head
Screw
Fixed Stay
Figure 10
Ceiling
Canopy
Spacer Tube
Check Ring
Cage with
Shade
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Rubber Washer
Flat Washer
Hex Nut
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of8
Figure 11
May2012
Page 8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1615DC
For Style ADS1615DC
STEP 10Attach Cap to Shade-
A. Place the Cap (N) over the Long Nipple (J) and secure
with the Finial (O). Hand tighten until snug.
Your lamp flush mount fixture is now assembled and
ready to use. Enjoy!
Shade
Cap
Finial
Long Nipple
Figure 12
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.May2012
or visit us on-line at www.quoizel.com
8of8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.