Preparation:Identifyandinspect all partsbeforebeginninginstallation. Check package
contentlistanddiagrams below tobesureall parts arepresent.Ifany parts aremissing
ordamaged,donot attempt toassemble,install,or operate thefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A
Package Contents
Part
ACrossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Steel Collar
Socket Collar
Socket Collar Tool
Ceiling Canopy
Socket Assembly
6” Rod
12” Rod
12” Rod with Nipple
Shade A
Shade B
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
1pc.
1pc.
1pc.
1pc.
B
C
D
E
F
G
H
I
J
K
LM
N
O
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of6
October2011
ADS1504DC
FINISH: DARK CHERRY
2.4mm
13Ga
6” Dia.
6”
GND
QUOIZEL
R
1
46.5”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
3”
12”
(1)100W Medium
Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
2
3
9512KIT
G2940SH
G2939SH
2
5.5”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
MTG HDW/CNPY DARK CHERRY 6"D
SHADE CLEAR WATER GLS 5.5"H
SHADE OPAL ETCHED GLS 4.5"H
3
4.5”
3” Dia.
4” Dia.
REQ.
1
1
1
2of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1504DC
For Style ADS1504DC
STEP 1Assemble Rods-
A. Determine the Rods (K/L/M) to be assembled to the
Socket Assembly (J) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (K/L/M) and then thread the chosen Rods (K/L/M)
and the Socket Assembly (J) together. Hand tighten until
snug.
STEP 2Assemble Ceiling Canopy to Upper
-
Rod
A. Pass Supply Wires and Ground Wire through the Ceiling
Canopy (I) and then thread the Ceiling Canopy (I) and the
Upper Rod together. Hand tighten until snug.
Figure 1
6” Rod
6” Rod
12” Rod
with Nipple
12” Rod
Supply Wire and
Ground Wire
Socket
Assembly
Ceiling
Canopy
Supply Wire and
Ground Wire
Figure 2
Upper Rod
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of6
October2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1504DC
For Style ADS1504DC
STEP 3 - Attach Shades to Socket
A. Place the Shade A (N), the Steel Collar (F) and the
Shade B (O) over the Socket in turn. By using the
Socket Collar Tool (H), thread the Socket Collar (G)
onto the Socket to secure above parts. Hand tighten
until snug.
STEP 4 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy (I).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Figure 3
Mounting Screw
Lock Washer
Ceiling
Canopy
Socket
Shade A
Steel Collar
Shade B
Socket Collar
Socket Collar
Tool
Crossbar
Hex Nut
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Figure 4
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of6
October2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1504DC
For Style ADS1504DC
STEP 5 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 6Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 5
Outlet
Box
Crossbar
Mounting
Hole
Outlet Box
Screw
White wire from supplyWhite wire from fixture
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 7
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
or visit us on-line at www.quoizel.com
5of6
Figure 6
October2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-ADS1504DC
For Style ADS1504DC
STEP 7 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy (I) over the Mounting Screws
(B) and secure with Mounting Balls (E). Hand tighten
until snug.
STEP 8Install Bulb-
A. This fixture uses standard bulb with a standard screw base.
Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your lamp mini pendant fixture is now assembled and ready
to use. Enjoy!
Figure 8
Mounting Screw
Ceiling Canopy
Mounting Ball
Figure 9
Socket
Bulb
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of6
October2011
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.