Page 1
Tenor DX VoIP MultiPath Switch
The Tenor VoIP MultiPath Switch
Offers a Robust VoIP Switching Solution
For Enterprises
Quintum's Tenor switching/gateway solutions are deployed worldwide to provide highly reliable, easy-to-implement VoIP connectivity
in a full range of enterprise and service provider environments.
These highly adaptable solutions work with traditional PBXs, IP
PBXs and IP phones, IVR and ACD systems, RADIUS servers, and
other critical components of end-to-end H.323- and SIP-based
communications environments. They are perfect for deploying VoIP
in small enterprises, or remote offices of larger enterprises.
• Available with 2, 4, 6 or 8 T1/E1/PRI Spans
• Up to 120 simultaneous VoIP calls
• Available in MultiPath or Gateway configurations
• Auto-Provisionable
• Survivable up to 60 channels
• Unified Communications Proxy (UCP)
• Supported by Remote Management Tools*
• Perfect for enterprises and service providers deploying
VoIP applications
Tenor S (Survivable MultiPath Switch)
Offers a Survivable Branch Office VoIP
Access Solution for IP PBXs and IP Centrex
Quintum's TenorS line is a complete SIP-based VoIP solution for the
branch office or for service provider customer premise equipment,
providing full survivability in the event that access to the central
and/or hosted IP PBX is lost. Because it delivers a complete solution in a single device - and because it offers such easy, scalable
implementation and management - the Tenor S line significantly
reduces the total lifecycle cost of VoIP deployment, while optimizing service reliability.Tenor S also offers PSTN connectivity for local
access back up and E911 service.
Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long
distance consolidation and call centers. Service providers can deploy numerous VoIP applications such as SIP Trunking,
Wholesale VoIP Termination, Calling Cards, Tandem Switching and Least Cost Routing. Product scales from a fractional
T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath Switch supporting 120 simultaneous VoIP calls.
Both versions of Tenor include the features that made Quintum the VoIP market value leader
• MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming
of the PBX, or upgrades are required and no need for special dialing plans.
• Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve
the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently
"hop off" to the PSTN, to reach off-net locations.
• Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring
the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor
to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor
configuration.
• Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP - SIP, TDM - TDM and SIP - TDM, for easy
integration with any network.
• Universal Dial Plan that provides a programmable dial plan so Tenor can be integrated into any network environment.
• PacketSaver™ Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets
from multiple calls into a single packet.
• NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a
VoIP call is established with an outside party.
• Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote
Management Session Server.
* Available for an additional cost
Page 2
Tenor DX VoIP MultiPath Switch
CALL MANAGEMENT FEATURES
• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced routing
TECHNICAL SPECIFICATIONS
Telephony Specifications
• Voice algorithms: G.723.1 and G.729ab, G.711
• Auto codec negotiation
• Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps,
using industry standard T.38; Super G3 compatible up
to 33.6 Kbps
• Modem support with G.711
• Choice of 2, 4, 6, or 8 T1/E1/PRI Spans
• Standard RJ-45 Connectors
• Coding: A-law, µ-law
• Enhanced (Carrier Grade) Echo Cancellation:
ITU Rec. G 168, up to 128 msec tailsize
• PRI Signaling Protocols: National ISDN-2, Euro ISDN
NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
• T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
• E1 CAS (R2 MF)
• DASS2
• Tandem/TDM switching
• Maximum Call Rate: 7,200 calls/hour
• VoIP to circuit, and circuit to circuit (Tandem/TDM) switching
IP Network Specifications
• LAN Interface: Fast Ethernet port (10/100Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10Base-T or
100Base-T connections
• QoS Support: IP TOS, DiffServ
• Pass-through support for calls to Toll Free, local and
special service numbers (emergency services, etc.)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least Cost Routing with external Quintum VoIP Call Routing Server*
• Caller ID Name and Number
VoIP Network Specifications
• H.323 v.3 Gateway and Integrated Gatekeeper+
• Support for multiple SIP User Agents (RFC3261 compliant endpoint)
• DTMF Signaling via RFC 2833 or SIP Info
• SIP Supplementary Services
• Message Waiting Indicator
• SIP Refer Method support
• IVR/RADIUS server support for AAA with integrated multi-lingual IVR+
• Adaptive Voice Activity Detection (VAD) with Comfort Noise
Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Concealment
• NATAccess™ - NAT/Firewall
• Security: IP Filtering
• Up to 120 simultaneous VoIP calls
• Support for DNS-SRV
Configuration / Management
• Auto-Provisionable
• Quintum Tenor Configuration Manager (GUI) for configuration of
remote individual Tenors
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring
and CDR monitoring
• Remote access with external Remote Management Session Server
• SNMPv2 Agent
• Command Line Interface
GENERAL SPECIFICATIONS
Dimensions: (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm. x H 4.5cm. x D 27.6cm.
• Maximum weight: 8.25 lbs. (3.75kg.)
• AC Power: 100-240 Volts AC, 50/60 Hz, 50 watts
• Operating temperature: 40° - 104° F (5° - 40° c.)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
• EMC: FCC Part 15, EN55022, EN55024, EN61000-2-3,
EN61000-3-3
• Safety: UL60950, EN60950, AS/NZS60950
71 James Way, Eatontown, New Jersey 07724
Tel 1-877-SPEAK-IP.1-732-460-9000.Fax 1-732-544-9119
www.Quintum.com
* Quintum product purchased separately
+ Original Quintum Tenor Only
Rev. 8
Loading...