MICROPHONE
stands
&
accessories
03
Microphone Stands & Accessories
300 SERIES “MICROLITE” MICROPHONE STANDS
- Constructed with strong, lightweight “Microlite” tubular steel
- Fast, smooth, non-slip boom swivel and height adjustments
- Available in scratch-resistant, baked-on, non-reflective, black
enamel finish
- Legs on tripod models bounce back into place if stepped on
- All locking points are protected by scratch-proof contact points
- Convenient mic cable clips supplied with every stand
- All parts are replaceable
- Five-year limited warranty
A/300
- Straight, Tripod with Fixed Length
Boom
A/344
- Straight, Tripod
Height adjustment range: 37.75” to 62”
95.9 to 157.5 cm
Boom length: 30” - 76.2 cm
Diameter of leg spread: 27.25’ - 69.2 cm
Folded height: 38” - 96.5 cm
Weight: 4.2 lb - 1.9 kg
Color: Black
Height adjustment range: 37.25” to 62.5”
94.6 to 158.8 cm
Diameter of leg spread: 27.25” - 69.2 cm
Folded height: 32.3” - 82 cm
Weight: 3.3 lb - 1.5 kg
Color: Black
03-2
A/340
- Short, Tripod with Fixed Length
Boom
Height adjustment range: 20.5” to 30.25”
52.1 to 76.8 cm
Boom length: 30”- 76.2 cm
Diameter of leg spread: 21.3” - 54 cm
Folded height: 29.9” - 76 cm
Weight: 3.1 lb - 1.4 kg
Color: Black
A/346
- Straight, Tripod with Telescopic
Boom
Height adjustment range: 37.75” to 62”
95.9 to 157.5 cm
Boom length: 22” to 40”
55.9 to 101.6 cm
Diameter of leg spread: 27.25” - 69.2 cm
Folded height: 38” - 96.5 cm
Weight: 4.2 lb - 1.9 kg
Color: Black
New improved telescopic boom
design with new telescopic
block clamp to ensure smooth
adjustments and a secure grip.
Fast, smooth, non-slip boom
swivel and height adjustments.
All locking points are protected
by scratch-proof contact points
Fast, easy height adjusments
are possible by means
of the new clutch unit.
New Improved Tripod Leg Base
Design The polycarbonate leg
base found on the 300 series
tripod stands use a new block
clamp system that locks the
base securely when tightened.
Convenient mic cable clips
supplied with every stand
High impact-resistant
lightweight polycarbonate base
with tubular steel tripod legs.
Step on a leg, and it will bounce
back in place.
A/341
- Short, Tripod with Telescopic
Boom
Height adjustment range: 16.5” to 19.25”
41.9 to 48.9 cm
Boom length: 22” to 40”
55.9 to 101.6 cm
Diameter of leg spread: 21.3” - 54 cm
Folded height: 22.4” - 57 cm
Weight: 3.1 lb - 1.4 kg
Color: Black
03-3
03
Microphone Stands & Accessories
“IN-SYNC” TRIPOD BASE MICROPHONE BOOM STANDS
- Constructed with strong, lightweight “Microlite” tubular steel.
- New boom swivel made of ABS composite material for high impact resistance ensures fast, smooth, non-slip
angle and height adjustments.
- Boom swivel clamp is ergonomically designed for ease of use and allows to adjust the boom length and angle
at the same time, with one move only. Perfect integration of style and functionality!
- Fast, easy and secure height adjustments are possible by means of the stylish, soft-grip, ergonomical clutch unit.
- All locking points are protected by scratch-proof contact points.
- Newly designed tripod leg base incorporating a truly innovative, advanced-technology locking system that
allows to open and close this stand in a flash. Just raise the “release” leg to a slightly angled position to set
the base free to move. Then lift the leg to its full extent and the base will firmly lock in position, to ensure
maximum stability and reliability.
No knobs to tighten or lose!!
- Strong, impact-resistant, lightweight polycarbonate base with tubular steel tripod
legs. Step on a leg, and it will bounce back in place!
- Convenient mic cable management clips supplied with every stand.
- Available in scratch-resistant, baked-on, non-reflective, black enamel finish.
A/302
- Straight, tripod with fixed length
boom
Newly designed tripod leg base incorporating a truly innovative, advanced-technology locking
system that allows to open and close this stand in a flash. Just raise the “release” leg to a
slightly angled position to set the base free to move. Then lift the leg to its full extent and
the base will firmly lock in position, to ensure maximum stability and reliability. No knobs to
tighten or lose!!
A/305
- Short, Tripod with Fixed Length
Boom
Height adjustment range: 38.2” to 64.2”
97 to 163 cm
Boom length: 30.3” - 77 cm
Diameter of leg spread: 28.3” - 72 cm
Folded height: 36.2” - 92 cm
Weight: 4.44 lb - 2 kg
Color: Black
Height adjustment range: 20.5” to 30.25”
52.1 to 76.8 cm
Boom length: 30” - 76.2 cm
Diameter of leg spread: 21.3” - 54 cm
Folded height: 29.9” - 76 cm
Weight: 3.88 lb - 1.75 kg
Color: Black
03-4
A/304
- Straight, Tripod with Telescopic
Boom
Height adjustment range: 37.75” to 62”
95.9 to 157.5 cm
Boom length: 22” to 40”
55.9 to 101.6 cm
Diameter of leg spread: 27.25” - 69.2 cm
Folded height: 38” - 96.5 cm
Weight: 4.44 lb - 2 kg
Color: Black
New boom swivel made of ABS
composite material for high impact
resistance ensures fast, smooth,
nonslip angle and height adjustments.
Boom swivel clamp is ergonomically
designed for ease of use and allows
to adjust the boom length and angle
at the same time, with one move
only. Perfect integration of style and
functionality!
A/306
- Short, Tripod with Telescopic
Boom
Fast, easy and secure height
adjustments are possible by
means of the elegant, soft-grip,
ergonomical clutch unit.
Strong, impact-resistant, lightweight
polycarbonate base with tubular steel
tripod legs. Step on a leg, and it will
bounce back in place.
Height adjustment range: 16.5” to 19.25”
41.9 to 48.9 cm
Boom length: 22” to 40”
55.9 to 101.6 cm
Diameter of leg spread: 21.3” - 54 cm
Folded height: 22.4” - 57 cm
Weight: 3.88 lb - 1.75 kg
Color: Black
Stylish boom end piece matches
contemporary design of height
adjustment clutch. Convenient mic
cable clips supplied with every stand.
New improved telescopic boom
design with new lever-style
block clamp to ensure smooth
adjustments and a secure grip.
03-5
03
Microphone Stands & Accessories
dual Cable Clips
tight non-slip
clutch
A/302PACK-2
- Microphone & Mic Stand Kit
The Quiklok Mic Stand Package includes:
A302 Microphone Boom Stand
Height adjustment range: 38.2” to 64.2”
97 to 163 cm
Boom length: 30.3” - 77 cm
Diameter of leg spread: 28.3” - 72 cm
Folded height: 36.2” - 92 cm
Weight: 4.44 lb - 2 kg
Color: Black
QMD043 Dynamic Microphone
Element: Moving Coil Dynamic
Polar Pattern: Uni-directional
Frequency Response: 60Hz~15KHz
Sensitivity: -54dB±3dB
(0dB=1V/Pa at 1KHz)
Output Impedance: 600 Ohm±30%
Microphone Cable
with male XLR to female XLR connectors (5mt - 17’ length)
MP890 Slip-in Rubber Mic Clamp
Nylon Tote Bag
03-6
A/399
A/399
- Straight, round base Mic Stand
with heavy-duty cast-iron base.
- Full-circumference rubber gasket
on base to prevent scratching
floor surfaces, and allow for
excellent stability
A/386
- Add-on telescopic boom with
steel boom swivel
Height adjustment range: 35.5” to 61.5”
90.2 to 156.2 cm
Base Diameter: 9.75” - 24.75 cm
Folded height: 35.5” - 90.2 cm
Weight: 7.8 lb - 3.5 kg
Color: Black
Boom length: 22” to 40”
55.9 to 101.6 cm
Weight: 1.2 lb - 0,54 Kg
Color: Black
A/302PACK-1
- Microphone Stand and Cable Kit
The Quiklok Mic Stand Package includes:
Three A302 Microphone Boom Stands
Height adjustment range: 38.2” to 64.2”
97 to 163 cm
Boom length: 30.3” - 77 cm
Diameter of leg spread: 28.3” - 72 cm
Folded height: 36.2” - 92 cm
Weight: 4.44 lb - 2 kg
Color: Black
Three Microphone Cable
with male XLR to female XLR connectors
(5mt - 17’ length)
Nylon Tote Bag
A/495
- Short microphone stand with
telescopic mic boom and metal
boom swivel. Featuring heavyduty cast-iron round base with
full-circumference rubber gasket
to prevent scratching floor
surfaces and provide excellent
stability.
Height adjustment range: 15” to 22.83”
38 to 58 cm
Boom length: 20.8” to 35.8”
53 to 91 cm
Base diameter: 9.75” – 24.75 cm
Folded height: 21.6” - 55 cm
Weight: 7.8 lb - 3.5 kg
Color: Black
03-7
03
Microphone Stands & Accessories
400 SERIES “PERFORMER” MICROPHONE STANDS
- Manufactured using heavy duty steel tubing and high-grade
hardware
- Cast-alloy tripod leg base design, incorporating a new block
clamp system, to ensure maximum stability and reliability as
demanded by the professional musicians
- All-metal boom swivel ensures fast, smooth, non-slip angle
and height adjustments
- Available in scratch-resistant, baked-on, non-reflective,
black enamel finish
- All locking points are protected by scratch-proof contact
points
- Convenient mic cable clips supplied with every stand
- All parts are replaceable
- Five-year limited warranty
A/492
- Microphone stand featuring castalloy tripod base and fixed length
mic boom with metal boom
swivel.
All-metal boom swivel
ensures fast, smooth,
non-slip angle and height
adjustments
Height adjustment range: 39.3” to 69.3”
100 to 176 cm
Boom length: 31.5” - 80 cm
Diameter of leg spread: 27.5” - 69.9 cm
Folded height: 37.5” - 95.3 cm
Weight: 5.45 lb - 2.45 kg
Color: Black
Cast-alloy tripod leg base
design, incorporating a
new block clamp system
that locks the base
securely when tightened
03-8
Stylish boom end
piece matching same
contemporary design of
height adjustment clutch
and boom swivel knob
A/494
- Microphone stand featuring castalloy tripod base and telescopic
mic boom with metal boom
swivel.
Height adjustment range: 39.3” to 69.3”
100 to 176 cm
Boom length: 20.8” to 35.8”
53 to 91 cm
Diameter of leg spread: 27.5” - 69.9 cm
Folded height: 37.5” - 95.3 cm
Weight: 5.8 lb - 2.6 kg
Color: Black
Fast, easy height adjusments
are possible by means
of the new clutch unit.
Convenient mic cable clips
supplied with every stand
A/496
- Short microphone stand featuring
cast-alloy tripod base and
telescopic mic boom with metal
boom swivel.
Height adjustment range: 20.5” to 30.25”
52.1 to 76.8 cm
Boom length: 20.8” to 35.8”
53 to 91 cm
Diameter of leg spread: 21.3” - 54 cm
Folded height: 29.9” - 76 cm
Weight: 4.6 lb - 2.1 kg
Color: Black
03-9
03
Microphone Stands & Accessories
500 SERIES PROFESSIONAL MICROPHONE STANDS
- Manufactured using heavy duty steel tubing and high-grade hardware
- Newly designed cast-alloy tripod leg base, incorporating an innovative locking system, that increases the clamping
surface, ensuring maximum stability and reliability, as demanded
by professional musicians
- Modern, contemporary all-metal boom swivel ensures fast, smooth, non-slip angle and height adjustments
- Knobs on boom swivel are ergonomically designed for ease of use
and built to prevent them from falling off the stand when loose or
completely unscrewed
- All locking points are protected by scratch-proof contact points
- Fast, easy and secure height adjustments are possible by means
of the stylish, ergonomical clutch unit
- Convenient mic cable clips supplied with every stand
- All parts are replaceable
- Available in scratch-resistant, baked-on, non-reflective, black
enamel finish
- Five-year limited warranty
A/512
- Professional microphone stand
featuring heavy-duty cast-alloy
tripod base and fixed length mic
boom with metal boom swivel
Modern and contemporary
all-metal boom swivel ensures
fast, smooth, non-slip angle and
height adjustments. Knobs on
boom swivel are ergonomically
designed for ease of use and
built to prevent them from falling
off the stand when loose or completely unscrewed
Height adjustment range: 39.3” to 69.3”
100 to 176 cm
Boom length: 31.5” - 80 cm
Diameter of leg spread: 27.5” - 69.9 cm
Folded height: 37.5” - 95.3 cm
Weight: 8.22 lb - 3.7 kg
Color: Black
Newly designed cast-alloy tripod leg base, incorporating an
innovative locking system, that
increases the clamping surface,
ensuring maximum stability and
reliability, as demanded by professional musicians
03-10
A/514
- Professional microphone stand
featuring heavy-duty cast-alloy
tripod base and telescopic mic
boom with metal boom swivel
Height adjustment range: 39.3” to 69.3”
100 to 176 cm
Boom length: 20.8” to 35.8”
53 to 91 cm
Diameter of leg spread: 27.5” - 69.9 cm
Folded height: 37.5” - 95.3 cm
Weight: 8.55 lb - 3.85 kg
Color: Black
Fast, easy and secure
height adjustments are
possible by means of
the stylish, ergonomical
clutch unit
Stylish boom end piece
matches elegant design
of height adjustment
clutch
Convenient mic cable
clips supplied with every
stand
Equipped with userfirendly and easily
maneuverable mic
holder stopper
A/516
- Short professional microphone
stand featuring heavy-duty castalloy tripod base and telescopic
mic boom with metal boom
swivel
Height adjustment range: 20.5” to 30.25”
52.1 to 76.8 cm
Boom length: 20.8” to 35.8”
53 to 91 cm
Diameter of leg spread: 21.3” - 54 cm
Folded height: 29.9” - 76 cm
Weight: 8.22 lb - 3.7 kg
Color: Black
03-11
03
Microphone Stands & Accessories
900 SERIES MICROPHONE STANDS WITH ONE-HAND CLUTCH HEIGHT
ADJUSTMENT MECHANISM
- Fast, smooth, non-slip height adjustments with the press of the hand.
- Constructed with strong, lightweight “Microlite” tubular steel.
- Scratch-resistant, baked-on black enamel finish.
- The A/988 features a heavy-duty cast-iron round base that will not chip or scratch.
- The A/987 is built using a lightweight but sturdy polycarbonate tripod leg base design.
- The A/989 tripod leg base stand features a telescopic boom.
A/988
- Straight, cast-iron round base
mic stand with one-hand clutch
height adjustment mechanism
- Featuring heavy-duty cast-iron
round base with full-circumference
rubber gasket to prevent
scratching floor surfaces and
provide excellent stability
Height adjustment range: 40.9” to 61.6”
104 to 156.6 cm
Diameter of base: 9.75” - 24.8 cm
Folded height: 40.9” - 104 cm
Weight: 10.6 lb - 4.8 kg
Color: Black
03-12
03-12
A/989
- Tripod leg base mic stand with
telescopic boom and onehand clutch height adjustment
mechanism
Height adjustment range: 40.9” to 61.6”
104 to 156.6 cm
Boom length: 22” to 40”
55.9 to 101.6 cm
Diameter of leg spread: 27.25” - 69.2 cm
Folded height: 40.9” - 104 cm
Weight: 4.6 lb - 2.1 kg
Color: Black
A/987
- Straight, tripod leg base mic
stand with one-hand clutch
height adjustment mechanism
Height adjustment range: 40.9” to 61.6”
104 to 156.6 cm
Diameter of leg spread: 27.25” - 69.2 cm
Folded height: 40.9” - 104 cm
Weight: 4 lb - 1.8 kg
Color: Black
03-1303-13
03
Microphone Stands & Accessories
A/50 HEIGHT ADJUSTABLE TRIPOD STUDIO BOOM STAND WITH CASTERS
- Perfect stand for any recording, broadcast or live show application
- Tripod leg design with dual bracing is built using SOLID STEEL LEGS - not tubing - to provide stable base for
use with all kinds of studio mics
- Easy-roll locking casters secure the stand firmly in place
- Folds down to compact size for easy transport
- Telescopic, 87” (221 cm) boom with adjustable counter weight for precise balancing
- Supplied with convenient mic cable clips
- Available in scratch-resistant, baked-on, non-reflective black
enamel finish
A/50
- Height Adjustable Tripod Studio
Boom Stand with casters
Tripod leg design features dual bracing and
solid steel legs to provide absolute stability
Height adjustment range*: 53.5” to 91.5”
136 to 232.5 cm
Boom length: 46.5” to 87”
118 to 221 cm
Diameter of leg spread: 36” - 91.4 cm
Folded height: 53.8” - 136.7 cm
Weight: 30 lb - 13.5 kg
*(Measured from floor to boom swivel)
Fast, smooth, safe, non-slip boom
adjustments are ensured by all-steel
boom swivel
03-14
Adjustable counter weight ensures precise
balancing
A/85 HEIGHT ADJUSTABLE TRIPOD STUDIO BOOM STAND
- Perfect stand for any recording or project studio
- Tripod leg design provides steady, stable base for holding all kinds of studio microphones
- Non-strip-out height adjustment and leg joint collar hardware with block tightening clamp assembly
- Manufactured using lightweight steel tubing
- Folds down to compact size for easy transport
- Telescopic, 76” (194 cm) boom with adjustable counter weight for precise balancing
- Supplied with convenient mic cable clips
- Quality construction at a low price
A/85
- Height Adjustable Tripod Studio
Boom Stand
Folds down to compact
size (55.1” - 140 cm) for easy transport
Height adjustment range*: 59” to 93”
150 cm to 236 cm
Boom length: 44.9” to 76.4”
114 cm to 194 cm
Diameter of leg spread: 39.4” - 100 cm
Folded height: 55.1” - 140 cm
Weight: 15.9 lb - 7.15 kg
Color: Black
*(measured from top of boom swivel to floor)
Boom adjustments are made easily by
simply loosening the center knob and
moving to anyone of the infinite, non-slip
angle adjustment positions
Adjustable counter weight ensures precise
balancing.
03-15
03
Microphone Stands & Accessories
A/156 CLAMP-ON MICROPHONE BOOM ARM FOR ACOUSTIC GRAND PIANOS
- Truly innovative (patent-pending) and unique microphone boom arm designed to mic any grand piano in the
most ideal way, so as to preserve and emphasize its acoustic characteristics, avoiding the congestion of several floor microphone stands all around the piano.
- Can be easily and securely anchored to any grand piano lid or case. Heavy, thick metal tightening clamp features soft rubber foam pads to aptly protect the lacquer finish of piano lid and case, and prevent from scratches and stains.
- By far the best solution for optimal positioning of up to two microphones into a grand piano body, for both live
performances on stage and studio recording sessions.
- All-metal boom swivel ensures fast, smooth, non-slip angle and length adjustments.
- Extremely versatile accessory, the A/156 can as well be used as a microphone desk arm for studios and multi-media workstations.
- Available in scratch-resistant, baked-on, non-reflective, black enamel finish.
A/156
- Clamp-on telescopic microphone
boom arm for acoustic grand
pianos
03-16
Telescopic boom length: 14.56” to 30”
37 to 75.5 cm
Clamp opening: 0.8” to 12.4”
2.05 to 3.15 cm
Clamp length: 8.26” - 21 cm
Weight: 4.3 lb - 1.94 kg
Color: Black
A/156 mic boom arm, anchored to the
piano body, with MP/900 dual mic holder.
Microphones are positioned within the
piano body to achieve a more direct and
higher-definition sound pickup.
A/156 mic boom arm and MP/900 dual
mic holder mounted onto a piano lid.
Microphones are positioned outside the
piano body to obtain a more open, airy
sound pickup.
When clamped onto the piano body, the
A/156 mic boom arm can as well prove
useful to pianists who also sing while
playing.
03-17
03
Microphone Stands & Accessories
A/25
- Microphone Desk Arm for studios
and multi-media workstations.
- Can be securely anchored to any
table top surface by means of its
tightening clamp (adjustable up
to 50 mm), or its screw-on table
flange.
- The flexible yet steady microphone
desk arm comes with mic
threaded adaptor and includes a
microphone cable.
A/188
- Desk tripod microphone stand
with rubber mic holder
Max load capacity: 1.7 lb - 0.8 kg
Color: Black
Height adjustment range: 4.3” to 6.7”
11 to 17 cm
Diameter of base: 7.5” - 19 cm
Weight: 0.75 lb - 335 g
Color: Black
03-18
A/114
- Short, Height Adjustable with
Cast-Iron Triangle Base
- Height adjustable with tiltable,
swiveling mast
- Available in either black enamel
or chrome plated finishes
- Can be used on floor or table
top for micing drums, amps or
conference rooms.
MS/303
- Small Clamp-on Sheet Music
Holder
- Heavy, thick metal clamp
securely attaches to mast of
almost any standard mic stand
Front width: 5.9” - 15 cm
Back width: 2.4” - 6 cm
Depth: 7.5” - 19 cm
Height: 1.3” - 3.3 cm
Room adjustment range: 13.7” to 22.4”
35 to 57 cm
Weight: 5.5 lb - 2.5 kg
Color: Black or Chrome
Sheet Music holder dimensions
Height: 7.9” - 20 cm
Width: 11.75” - 30 cm
Bottom lip: 2.3” - 6 cm
Clamp opening: 0.55” to 1.18”
14 to 30 mm
Weight: 2.1 lb - 0.95 kg
Color: Black
A/107
- Clamp-on Boom Arm Attachment
- Add extra microphones without
more stands congestions
- Perfect for micing saxophones,
drums, acoustic guitars, etc.
- Rubber-tipped 8 mm lock screw
will not strip-out when tightened
or scratch mic stand
- Heavy, thick metal clamp
securely attaches to mast of any
standard mic stand
Boom lenghth: 30” - 76.2 cm
Vertical pole height: 10” - 25.4 cm
Clamp opening: 0.55” to 1.18”
14 to 30 mm
Weight: 1.6 lb - 0.72 kg
Color: Black
MS/326
- Clamp-on beverage holder
Solid metal holder for bottles,
glasses, cans and cups with
maximum diameter of 84 mm.
Heavy, thick metal clamp
securely attaches to microphone
and sheet music stands with
tubing diameter of up to 30 mm.
Ideal performance companion,
keeps your drink at immediate
reach when needed!
MS/327
- Headphone holder
- Clever, safe and practical
headphone holder allows
musicians to keep their
headphone within immediate
reach when not in use, hanging
it on any instrument stand or
multi-media workstation, for use
on stage, production studios, in
the rehearsal room or at home
- Solid all-metal holder, with soft
rubber foam coating on headphone
support, to hold it firmly in place,
carefully preserving its finish
- By means of its versatile tightening
clamp, the MS327 can be securely
anchored to any table top surface,
and microphone/sheet music/
keyboard/mixer stands of any
shape and size ranging from 14 to
48 mm (0.55” to 1.89”)
Height: 18.2” - 8.2 cm
Diameter: 3.34” - 8.5 cm
Clamp opening: 0.55” to 1.18”
14 to 30 mm
Weight: 0.81 lb - 0.366 kg
Color: Black
Headphone support width: 3.9” - 10 cm
Headphone support depth: 1.5” - 4 cm
Clamp opening: 0.55” to 1.89”
14 to 48 mm
Weight: 0.88 lb - 0.40 kg
Color: Black
MS/329
- Large Clamp-on Utility Tray
- Designed to keep small devices
and utilities within immediate
reach while performing
Tray dimensions:
Depth: 8.4” - 21.3 cm
Width: 8.4” - 21.3 cm
Clamp opening: 0.55” to 1.18”
14 to 30 mm
Weight: 2.6 lb - 1.2 kg
Color: Black
03-19
03
Microphone Stands & Accessories
IPS/10 HOLDER FOR IPAD 2 & NEW IPAD (3rd & 4th GENERATION)
- Clever, safe and practical design allows musicians to integrate their iPad 2 or new iPad (3rd & 4th generation) with
existing microphone and sheet music stands, for use on stage, production studios, in the rehearsal room or at home.
- Flexible yet rugged rubberized plastic clips will hold the tablet firmly and securely in place, without interfering
with dock connector, speaker, headphone jack, on/off and volume buttons. Snapping the iPad into the holder
and sliding it out is effortless and quick!
- No-wobble, lightweight aluminium plate is designed to ensure full tilt and rotational adjustability, and to switch
rapidly from the vertical to the horizontal viewing mode without slipping, for ideal positioning of your iPad.
- The holder can be fastened directly on to any 3/8” standard microphone stand thread connection. A slim
yet sturdy steel bracket (included) allows to mount the tablet holder sideways to the vertical pole of any
microphone or sheet music stand with diameter ranging from 14 to 30 mm (0.55” to 11.8”).
IPS/10
- Holder for ipad 2 & new ipad (3rd
& 4th generation)
Weight: 0.66 kg (1.47 lb)
Color: Black
03-20
IPS/12 UNIVERSAL TABLET HOLDER
- Clever, safe and practical design allows musicians to integrate their tablet with existing microphone and sheet music
stands, for use on stage, production studios, in the rehearsal room or at home.
- Will accommodate virtually any size tablet having side measurements ranging from 111 mm to 301 mm (4.37”
to 11.85”) and depth ranging from 6.9 mm to 18.7 mm (0.27” to 0.73”).
- Flexible yet rugged rubberized plastic stoppers will hold the tablet firmly and securely in place, without
interfering with dock connector, speaker, headphone jack, on/off and volume buttons.
- No-wobble, lightweight aluminium plate is designed to ensure full tilt and rotational adjustability, and to switch
rapidly from the vertical to the horizontal viewing mode without slipping, for ideal positioning of your tablet.
- The holder can be fastened directly on to any 3/8” standard microphone stand thread connection. A slim
yet sturdy steel bracket (included) allows to mount the tablet holder sideways to the vertical pole of any
microphone or sheet music stand with diameter ranging from 14 to 30 mm (0.55” to 11.8”).
IPS/12
- Universal tablet holder
- Will accommodate virtually
any size tablet having side
measurements ranging from 111
mm to 301 mm (4.37” to 11.85”)
and depth ranging from 6.9 mm
to 18.7 mm (0.27” to 0.73”).
Weight: 0.66 kg (1.47 lb)
Color: Black
03-21
03
Microphone Stands & Accessories
FAP/01
- Professional Pop Filter
designed with moulded
plastic filter
- Easily connects to any
microphone stand to
prevent annoying
vocal thrusts.
MP/840
- Rubber tapered mic holder
FAP/05
- Professional Pop Filter
designed with finer nylon
fabric filter
- Easily connects to any
microphone stand to
prevent annoying
vocal thrusts.
MP/850
- Spring-Loaded Plastic Mic
Clip for Wired and Wireless
Microphones
MP/892
- Small Rubber Mic Clip for
Wired Microphones
MP/891
- Shock-proof mic holder
- Isolates microphone from
stand and stage vibrations.
MP/890
- Large Rubber Mic Clip for
Wireless Microphones
MP/900
- Adjustable dual microphone
holder
03-22
Loading...