YOUR
SolutionS Provider
SOLUTIONS PROVIDER
PRODUCT CATALOG
UALITY
is
PRIORITY
at
& customer service is standard
with all of our flex duct products
Johns Manville Formaldehyde-Free™ Fiberglass Insulation
Oversized Core to Fit on Collars and Register Boxes
®
Children & Schools GREENGUARD
Indoor Air Quality Certified
Compressed Packaging in Bags or Boxes
Anti-Microbial Coated* Commercial & Acoustical Flex Available
(*On Certain Products, Inhibits the Growth of Bacterial Odors)
Color Coded Packaging in Correlation to
R-Value for Product Identification
Bar Coded Product Labels
10 Year Warranty
Available in R4.2, R6.0 and R8.0
www.quietflex.com
2 •
AMGFlex® Duct
An indoor air quality system is not complete without AMGFlex Duct from Quietflex.
In ductwork, conditions can exist for the growth and proliferation of indoor air
contaminants. AMGFlex Duct continuously inhibits the growth of bacterial odors
with an antimicrobial coating, Agion, on the inner core. Furthermore, AMGFlex
uses Johns Manville Formaldehyde-free insulation, which helps reduce overall
formaldehyde exposure and results in a healthier and safer home. For the ultimate
in indoor air quality, be certain to install Quietflex AMGFlex Duct.
• Available in R6.0 and R8.0
• Agion Coated Inner Core Inhibits the Growth of Bacterial Odors
• Polyester Vapor Barrier and Heavy-Duty Rip-Stop Scrim Reinforcement
SERIES R-VALU E
4 5 6 7 8 9 10 12 14 16
86 6.0 • • • • • • • • • •
88 8.0 • • • • • • • • • •
DIAMETER
HPDFlex™ Duct (Commercial)
The HPDFlex Duct is able to satisfy the demands of high pressure HVAC
applications by being rated for up to –2 inch negative and +16 inch W.C. positive
static pressure. This high pressure duct has a resilient metallic, polyester-vapor
barrier with a special “rip-stop” scrim reinforcement. It also uses Johns Manville
Formaldehyde-free insulation, which helps reduce overall formaldehyde exposure.
Furthermore, HPDFlex Duct continuously inhibits the growth of bacterial odors with
an antimicrobial coating, Agion, on the inner core.
• Available in R4.2, R6.0 and R8.0
• –2” W.C. Negative and +16” W.C. Positive Pressure
• Agion Coated Inner Core Inhibits the Growth of Mold and Bacteria
• Polyester Vapor Barrier and Heavy-Duty Rip-Stop Scrim Reinforcement
SERIES R-VALU E
4 5 6 7 8 9 10 12 14 16
340 4.2 • • • • • • • • • •
380 6.0 • • • • • • • • • •
385 8.0 • • • • • • • • • •
DIAMETER
www.quietflex.com
•
3
QAS Branded
Acoustical Flex Duct
The QAS Acoustical Flex Duct reduces the overall sound transmitted
through your flex duct system. Noise traveling in your duct wall, generated
by your HVAC system, air flow, media rooms, and other sound sources is
reduced. The key technology is the perforated inner core which allows the
noise to be absorbed by the thermal insulation. In addition, QAS features
Johns Manville Formaldehyde-free™ insulation which reduces the risk of
formaldehyde exposure.
• Available in R6.0 and R8.0
• –1/2” W.C. Negative and +4” W.C. Positive Static Pressure
• 7’ Collared Flex Available for Quicker Installation
SERIES R-VALU E
4 5 6 7 8 9 10 12 14 16
105 4.2 • • • • • • • • • • •
120 6.0 • • • • • • • • • • •
125 8.0 • • • • • • • • • • •
DIAMETER
18
Rip Stop Silver Jacket Flex Duct
The Rip Stop Silver Jacket Flex Duct has a metallic, polyester-vapor barrier with a
special “rip-stop” scrim reinforcement. It also uses Johns Manville Formaldehydefree™ insulation, which helps reduce overall formaldehyde exposure.
• Available in R4.2, R6.0 and R8.0
• Available in Bag or Boxed Packaging
• –1/2” W.C. Negative and +10” W.C. Positive Static Pressure
SERIES R-VALU E
3 4 5 6 7 8 9 10 12 14 16 18 20 22
DIAMETER
www.quietflex.com
4 •
40 4.2 • • • • • • • • • • • • •
80 6.0 • • • • • • • • • • • • • •
85 8.0 • • • • • • • • • • • • •
UV-Inhibited Black Jacket
The UV-Inhibited Black Jacket Flex Duct has a UV-inhibited polyethylene
vapor barrier.
• Available in R4.2, R6.0 and R8.0
• Available in Bag or Boxed Packaging
• Durable 2 mil Polyethylene Vapor Barrier
• –1/2” W.C. Negative and +10” W.C. Positive Static Pressure
SERIES R-VALUE
4 5 6 7 8 9 10 12 14 16 18 20 22
20 4.2 • • • • • • • • • • • • •
60 6.0 • • • • • • • • • • • • •
65 8.0 • • • • • • • • • • • •
DIAMETER
Manufactured Housing
Flex Duct
The Mobile Home Flex Duct has an extra heavy-duty, UV-inhibited
polyethylene vapor barrier and complies with HUD standards for outdoor
use with mobile homes.
• Available in R4.2, R6.0 and R8.0
• Available in Bag Packaging
• Heavy Duty 4 mil Polyethylene Vapor Barrier
• –1/2” W.C. Negative and +10” W.C. Positive Static Pressure
SERIES R-VALUE
6 7 8 9 10 12 14 16 18
51 4.2 • • • • • • •
71 6.0 • • • • • • •
81 8.0 • • • • • • • • •
DIAMETER
www.quietflex.com
•
5
• 3
SERIES
DIAMETER
4 5 6 7 8 9 10 12 14 16
86 • • • • • • • • • •
88 • • • • • • • • • •
AMGFlex
®
Duct
An indoor air quality system is not complete without AMGFlex Duct from Quietflex.
In ductwork, conditions can exist for the growth and proliferation of indoor air
contaminants. AMGFlex Duct continuously inhibits the growth of bacterial odors
with an antimicrobial coating, Agion, on the inner core. Furthermore, AMGFlex
uses Johns Manville Formaldehyde-free insulation, which helps reduce overall
formaldehyde exposure and results in a healthier and safer home. For the ultimate
in indoor air quality, be certain to install Quietflex AMGFlex Duct.
• Available in R6.0 and R8.0
• Agion Coated Inner Core Inhibits the Growth of Bacterial Odors
• Polyester Vapor Barrier and Heavy-Duty Rip-Stop Scrim Reinforcement
SERIES
DIAMETER
4 5 6 7 8 9 10 12 14 16
340 • • • • • • • • • •
380 • • • • • • • • • •
385 • • • • • • • • • •
HPDFlex™ Duct (Commercial)
The HPDFlex Duct is able to satisfy the demands of high pressure HVAC
applications by being rated for up to –2 inch negative and +16 inch W.C. positive
static pressure. This high pressure duct has a resilient metallic, polyester-vapor
barrier with a special “rip-stop” scrim reinforcement. It also uses Johns Manville
Formaldehyde-free insulation, which helps reduce overall formaldehyde exposure.
Furthermore, HPDFlex Duct continuously inhibits the growth of bacterial odors with
an antimicrobial coating, Agion, on the inner core.
• Available in R4.2, R6.0 and R8.0
• –2” W.C. Negative and +16” W.C. Positive Pressure
• Agion Coated Inner Core Inhibits the Growth of Mold and Bacteria
• Polyester Vapor Barrier and Heavy-Duty Rip-Stop Scrim Reinforcement
Insulated Sleeve
The Insulated Sleeve is ideal for use in insulating new or existing hard pipe.
It increases the efficiency of warm or cool air traveling through the duct and
reduces condensation build-up. The oversized diameter of the sleeve results in
an easy slip-on installation.
• Available in R4.2, R6.0 and R8.0
• Available in Boxed Packaging
• Cut Lengths of 5’ and 10’
• Available in Metallic Polyester-Vapor Barrier or Polyethylene Vapor Barrier
• One Starter Cap Included in Each Box
SILVER SLEEVE DIAMETER
SERIES R-VAL UE
4 5 6 7 8 9 10 12 14 16
SS42 R4.2 • • • • • • • • • •
SS60 R6.0 • • • • • • • • • •
SS80 R8.0 • • • • • • • • • •
BLACK SLEEVE
BS42 R4.2 • • • • • • • • • •
BS60 R6.0 • • • • • • • • • •
BS80 R8.0 • • • • • • • • • •
6’ and 7’ Collared Silver
Jacket Flex Duct
The silver jacket pre-collared product has a metallic, polyester-vapor barrier
with “rip-stop” scrim reinforcement. It is constructed with a universal male/
female collar that is factory attached at each end. This product comes pre-
assembled and packaged 2 to a box.
• Available in R4.2, R6.0 and R8.0
Insulated Sleeve
The Insulated Sleeve is ideal for use in insulating new or existing hard pipe.
It increases the efficiency of warm or cool air traveling through the duct and
reduces condensation build-up. The oversized diameter of the sleeve results in
an easy slip-on installation.
• Available in R4.2, R6.0 and R8.0
• Available in Boxed Packaging
• Cut Lengths of 5’ and 10’
• Available in Metallic Polyester-Vapor Barrier or Polyethylene Vapor Barrier
• One Starter Cap Included in Each Box
SILVER SLEEVE DIAMETER
SERIES R-VALU E
SS42 4.2 • • • • • • • • • •
SS60 6.0 • • • • • • • • • •
SS80 8.0 • • • • • • • • • •
BLACK SLEEVE
BS42 4.2 • • • • • • • • • •
BS60 6.0 • • • • • • • • • •
BS80 8.0 • • • • • • • • • •
6’ and 7’ Collared Silver
Jacket Flex Duct
The silver jacket pre-collared product has a metallic, polyester-vapor barrier
with “rip-stop” scrim reinforcement. It is constructed with a universal male/
female collar that is factory attached at each end. This product comes preassembled and packaged 2 to a box.
• Available in R4.2, R6.0 and R8.0
• Available in 6’ or 7’ Lengths
• Pre-Assembled for Quicker Installation
6’ COLLARED SILVER JACKET DIAMETER
4 5 6 7 8 9 10 12 14 16
www.quietflex.com
6 •
SERIES R-VALUE
30-6 4.2 • • • • • • • • • • •
70- 6 6.0 • • • • • • • • • • •
84-6 8.0 • • • • • • • • • • •
7’ COLLARED SILVER JACKET
30-7 4.2 • • • • • • • • • • •
70-7 6.0 • • • • • • • • • • •
84-7 8.0 • • • • • • • • • • •
4 5 6 7 8 9 10 12 14 16 18
Uninsulated Connector
The Uninsulated Air Connector has an oversized core to fit on collars and
register boxes for quicker installation.
• 3” and 4” Packaged Individually – 25 to a Master Carton
• 5” through 20” Packaged 4 to a Master Carton
• All Lengths of 25’
Dryer Vent
The Clothes Dryer Transition Duct is an easy to install boxed universal flexible
dryer duct. The heavy duty 4-ply aluminum foil laminate construction makes this
product fire resistant and meets all the requirements of UL 2158A.
• Fits Most Commonly Used Electric and Gas Dryers
• Fits in Tight Places Where Rigid Metal Ducting Will Not Work
• Close Wire Frame Spacing Allows Tight Bends Without Collapsing
SERIES
DIAMETER
3 4 5 6 7 8 9 10 12 14 16 18 20
06 • • • • • • • • • • • • •
• 3
SERIES
DIAMETER
4 5 6 7 8 9 10 12 14 16
86 • • • • • • • • • •
88 • • • • • • • • • •
AMGFlex
®
Duct
An indoor air quality system is not complete without AMGFlex Duct from Quietflex.
In ductwork, conditions can exist for the growth and proliferation of indoor air
contaminants. AMGFlex Duct continuously inhibits the growth of bacterial odors
with an antimicrobial coating, Agion, on the inner core. Furthermore, AMGFlex
uses Johns Manville Formaldehyde-free insulation, which helps reduce overall
formaldehyde exposure and results in a healthier and safer home. For the ultimate
in indoor air quality, be certain to install Quietflex AMGFlex Duct.
• Available in R6.0 and R8.0
• Agion Coated Inner Core Inhibits the Growth of Bacterial Odors
• Polyester Vapor Barrier and Heavy-Duty Rip-Stop Scrim Reinforcement
SERIES
DIAMETER
4 5 6 7 8 9 10 12 14 16
340 • • • • • • • • • •
380 • • • • • • • • • •
385 • • • • • • • • • •
HPDFlex™ Duct (Commercial)
The HPDFlex Duct is able to satisfy the demands of high pressure HVAC
applications by being rated for up to –2 inch negative and +16 inch W.C. positive
static pressure. This high pressure duct has a resilient metallic, polyester-vapor
barrier with a special “rip-stop” scrim reinforcement. It also uses Johns Manville
Formaldehyde-free insulation, which helps reduce overall formaldehyde exposure.
Furthermore, HPDFlex Duct continuously inhibits the growth of bacterial odors with
an antimicrobial coating, Agion, on the inner core.
• Available in R4.2, R6.0 and R8.0
• –2” W.C. Negative and +16” W.C. Positive Pressure
• Agion Coated Inner Core Inhibits the Growth of Mold and Bacteria
• Polyester Vapor Barrier and Heavy-Duty Rip-Stop Scrim Reinforcement
Uninsulated Connector
The Uninsulated Air Connector has an oversized core to fit on collars and
register boxes for quicker installation.
• 3” and 4” Packaged Individually – 25 to a Master Carton
• 5” through 20” Packaged 4 to a Master Carton
• All Lengths of 25’
Uninsulated Connector
The Uninsulated Air Connector has an oversized core to fit on collars and
register boxes for quicker installation.
• 3” and 4” Packaged Individually – 25 to a Master Carton
• 5” through 20” Packaged 4 to a Master Carton
• All Lengths of 25’
SERIES
06 • • • • • • • • • • • • •
3 4 5 6 7 8 9 10 12 14 16 18 20
DIAMETER
Dryer Vent
The Clothes Dryer Transition Duct is an easy to install boxed universal flexible
dryer duct. The heavy duty 4-ply aluminum foil laminate construction makes this
product fire resistant and meets all the requirements of UL 2158A.
• Fits Most Commonly Used Electric and Gas Dryers
• Fits in Tight Places Where Rigid Metal Ducting Will Not Work
• Close Wire Frame Spacing Allows Tight Bends Without Collapsing
BOXED LENGTHS DIAMETERS
Feet Inch
8 Nominal 4” (actual 4.125)
25
50
Each hose will be packaged individually and then placed in a master carton.
50 pieces for 8’, 25 pieces for 25’ and 10 pieces for 50’
www.quietflex.com
•
7
Quietflex Manufacturing Company, L.P.
4518 Brittmoore Road • Houston, Texas 77041
Phone 713.849.2163 • Fax 713.849.0753 • Toll Free 877.694.3669
www.quietflex.com
WARRANTY
Quiet ex Manuf actur ing Comp any, L.P.
warran ts its pro ducts fo r ten (10) years
against defects i n material and work manshi p,
provided that no such product is installed
in a locat ion expo sed to dire ct or indirect
light or on t he high -pres sure side o f
variab le air-volu me (VAV) syste ms.
THIS WAR RAN TY IS E XCLUSIV E. IT
IS PROVID ED IN LIEU O F ANY OTH ER
EXPR ESS OR IM PLIED WAR RAN TIES,
INCLUDING BUT NOT LIMIT ED
TO ANY IM PLIED WAR RAN TY OF
MERCH ANTABILI TY OR FI TNESS
FOR ANY PARTICUL AR PUR POSE.
Quiet ex® is a re gistere d trademark of Qu ietex M anufac turing Company, L. P.
As Quiet ex’s so le oblig ation, and the
purcha ser’s excl usive rem edy, for any
defect c overed by this warranty, Quiet ex
will rep lace any de fective produc ts.
Quiet ex will n ot be responsible for any
labor charges o r other co sts of eit her
deinst allation of any defe ctive pr oducts o r
instal lation of any replac ement pr oduct s.
Houston
10 Year Warrant Y • © all rights reserved 2012
LIMITATION OF LIABILITY
QUIET FLEX MANUFACTU RING
COMPAN Y, L.P. SHALL IN NO E VENT
BE LIAB LE FOR AN Y INCID ENTAL OR
CONSEQUENTI AL DAM AGES ARI SING
OUT OF OR R ELATING TO I TS PRODU CTS,
WHETHER FOR BR EACH OF WA RRA NTY
OR OTHER C ONTR ACT BRE ACH,
NEGLIG ENCE OR OTHER TORT, OR
ON ANY STRICT LIABILIT Y THEORY.
Loading...