Quick S p A unipersonale TXP User Manual

REV 000A

PRELIMINARY

High

RRC

PW94

PT94

Quality

Nautical

RADIO REMOTE CONTROL

THRUSTER POCKET TRANSMITTER

Equipment

Manual of installation and use

GB

FR

Mode d’installation et d’emploi

RRC THRUSTER POCKET TRANSMITTER

ÉMETTEUR DE POCHE RRC THRUSTER

GB

INDEX

Pag. 4 CHARACTERISTICS AND OPERATION
Pag. 5/6 OPERATION - correspondence between pressed key and activated relay
Pag. 7 OPERATION - disabling the transmitter - battery replacement
MAINTENANCE - TECHNICAL DATA

FR

SOMMAIRE

P. 8 CARACTÉRISTIQUES ET FONCTIONNEMENT
P. 9/10 FONCTIONNEMENT - correspondance touche appuyee e relais active
P. 11 FONCTIONNEMENT - remplacement de la batterie
ENTRETIEN - CARACTÉRISTIQUES TECHNIQUES

RRC PW94-PT94 - REV000A

3

GB

CHARACTERISTICS AND OPERATION

RRC THRUSTER POCKET RADIO TRANSMITTER

The RRC Thruster pocket transmitter is a device which combined with a RRC radio receiver is used to control Quick thrusters
installed on recreational crafts.

The RRC radio system for thrusters must be used as a supplement to the Quick wired thruster control system already installed
on the boat.

Take necessary steps in order to avoid that malfunctioning of the RRC Thruster radio control system may cause damage
to people, animals or property.

The advantages offered by the RRC Thruster pocket radio transmitter are:

• Microcontroller-operated functions.

• Operating temperatures from -15°C to +70°C.

• FSK modulation and carrier frequency 913.7 Mhz.

• LED indication of operational status, low battery and transmission feedback.

• Floating.

INSTALLATION

BEFORE USING THE RADIO TRANSMITTER, CAREFULLY READ THIS USER MANUAL. IN CASE OF
DOUBTS PLEASE CONTACT THE RETAILER OR QUICK® CUSTOMER SERVICE.

This device was designed and constructed for use on recreational crafts.

F

Other forms of use are not permitted without written authorization from the company Quick

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

F

user’s authority to operate the equipment.

The RRC Thruster pocket radio transmitter has been designed and manufactured for the purposes described in this user
manual. Quick
installation or errors possibly present in this manual.

THE PACKAGE CONTAINS:

manual of installation and use.

Pocket transmitter

®

is not liable for direct or indirect damages caused by an improper use of the radio control, due to an incorrect

pocket radio transmitter with battery included - lanyard - conditions of warranty - the present

Transmission LED

®

.

model PW94 model PT94

WARNING:

the reveiver’s user manual.

the transmitter needs to be programmed in the receiver’s memory. To do this, follow the procedure shown in

1

3

2

4

Power supply

The pocket transmitter is powered using a lithium CR2450 battery. To replace it, see the BATTERY REPLACEMENT paragraph.

Enabling

The RRC Thruster pocket transmitter is enabled by keeping both
keys pressed for the PT94 model.
Once they have been pressed, the orange transmission LED fi rst starts fl ashing at regular intervals and then starts
fl ashing more quickly. After they have been released, the transmission LED will communicate through brief fl ashes that
enabling has taken place.

keys pressed for the PW94 model and 1

2

Operational status

When any of the transmitter keys is pressed, the green transmission LED flashes quickly to signal that transmission has taken
place. Each key pressed corresponds to the activation of a relay (or 2 relays) on the receiver, which will stay active as long as
the key isn’t released.

4

RRC PW94-PT94 - REV000A

CORRESPONDENCE BETWEEN PRESSED KEY AND ACTIVATED RELAY

1

2

OPERATION

NO1

relay 1 relay 2

NO3

ANT

SHIELD

PROG

GB

NO2

relay 4relay 3

NO4

RRC PW94 THRUSTER

3

POCKET TRANSMITTER

RRC PT94 THRUSTER

4

V

RRC R904 RADIO RECEIVERPOCKET TRANSMITTER

RRC PW94 Thruster pocket transmitter and RRC R904 radio receiver

Pressing the
Pressing the

key (anchor ascent) activates relay 1 on the receiver.
key (anchor descent) activates relay 2 on the receiver.

Pressing the two keys simultaneously cancels the transmission.

Pressing the key (bow left) activates relay 3 on the receiver.
Pressing the
A 2 second transmission delay is introduced when passing from the

key (bow right) activates relay 4 on the receiver.

key (bow left) to the key (bow right) and vice
versa.
Pressing the two keys simultaneously cancels the transmission.

RRC PT94 Thruster pocket transmitter and RRC R904 radio receiver

Pressing the 1
Pressing the 2
A 2 second transmission delay is introduced when passing from the 1

key (bow left) activates relay 1 on the receiver.
key (bow right) activates relay 2 on the receiver.

key (bow left) to the 2 key (bow right) and

vice versa.
Pressing the two keys simultaneously cancels the transmission.

Pressing the 3
Pressing the 4
A 2 second transmission delay is introduced when passing from the 3

key (stern left) activates relay 3 on the receiver.
key (stern right) activates relay 4 on the receiver.

key (stern left) to the 4 key (stern right)

and vice versa.
Pressing the two keys simultaneously cancels the transmission.

COM

+V-

RRC PW94-PT94 - REV000A

5