Quick Eagle Networks DL3150 User Manual

Bandwidth is becoming more and more a commodity. As a result bandwidth
prices have slipped, which is one of the main reasons for the increased demand
for subrate or full T3/E3 transmission services. Another driving force for the
increased demand for high-speed transmission services is the diversity and
complexity of today's data applications.

Quick Eagle Networks’ DL3150 and DL3155 Access MultiplexersTMmake high­speed data connectivity more economical by enabling you to connect your data
terminal equipment (DTE) devices to a public or private T3 / E3 network at full or
subrate speeds. Both units support symmetric and asymmetric data rates of up
to 34.2 Mbps (in 358 Kbps increments for E3) or 44.2 Mbps (in 300 Kbps increments
for T3).

With a software selectable T3 / E3 network interface the DL3150 and DL3155
enable worldwide deployment. It just takes you a stroke of a key to change
between the T3 and E3 firmware.

The DL3150 Access Multiplexer provides one HSSI data interface to the DTE,
while the DL3155 Access Multiplexer comes equipped with two HSSI data
interfaces. The second HSSI port on the DL3155 enables you to take advantage
of multiplexing capabilities. An Ethernet management port as well as a serial
console port provide additional options for you to manage the devices besides
SNMP management and Telnet capabilities.

Ideal for carrier backbone connectivity via satellite, the DL3150 and DL3155
Access Multiplexers offer smooth clock support on the HSSI (towards the LAN)
as well as asymmetric clock support towards the WAN.

The proprietary “Digital Link” mode that is supported by the DL3150 and DL3155
Access Multiplexers is also supported by many leading T3/E3 router vendors.

The DL3150 and DL3155 Access Multiplexers are your best choice when it
comes to taking advantage of T3 / E3 transmission services.

Economical T3 / E3 access for
high-speed data applications.

Main Benefits:

• Software changeable T3/E3

interface, which enables you to
select preferred interface during
setup and supports worldwide
deployment

• Extensive diagnostic and

management features such as
Ethernet management port, SNMP
agent, or serial console port
enable local and remote fault
analysis

•

Symmetric and asymmetric data
rates in 300 Kbps (T3) or 358 Kbps
(E3) increments

•

M13 framing and C-bit parity
compliant (T3) as well as Clear
Channel and standard Mux
compliant (E3)

• Smooth clock support on HSSI

(towards LAN) as well as
asymmetric clock towards WAN for
compatibility with satellites

• Small footprint and low cost

ensure economical T3 / E3
access for one or two high-speed
data applications

The DL3150 and DL3155
Access Multiplexer

The DL3150 and DL3155 Access Multiplexers provide the following features:

• Software selectable T3 / E3 network interface

• Fluorescent front panel display for easy local access

• AC / DC power supply in the same platform

• 10/100 Ethernet management port

• M13 framing and C-bit parity compliant (T3) as well as Clear Channel and standard Mux

compliant (E3)

• Single serial console port for use as COMM port

• Selectable clock (internal, network, external)

• BNC connectors for network and external clock

•

Supports symmetric and asymmetric data rates in 300 Kbps (T3) and 358 Kbps (E3)
increments

• Downloadable code (TFTP, XMODEM) for easy upgrades

• Proprietary time slotting

•

In-band communications and SNMP management capabilities

• Supports T3 / E3 and HSSI statistics

• Supports test pattern generation (future)

• Supports versatile loopbacks (network and DTE payload)

• Satellite compatibility:

• Smooth clock support at HSSI (towards LAN) for compatibility with satellites

• Asymmetric clock towards the WAN / LAN

• Compatible with Quick Eagle’s DL3100 Access Multiplexer

• Supports unchannelized T3 / E3 subrates

• Support of TACACS+ as an enhanced security feature (special firmware version) to

provide centralized validation of users, who attempt to gain access to routers, network
access servers, etc. The TACACS+ feature provides modular authentication,
authorization, and accounting facilities in conjunction with the user’s central TACACS+
server

• Small footprint allows mounting of two units in a 19 inch rack space (using Quick Eagle’s

rack mount kit)

• The proprietary “Digital Link” mode that is supported by the DL3150 and DL3155 Access

Multiplexers is also supported by many leading T3/E3 router vendors

Leading the communication trend.

The following diagrams show some of the typical applications supported by the DL3150 / DL3155 Access Multiplexer:

D

r

D

SSI

I

3

3

Access Multiplexer

r

r

I

SSI

2

3

3

Access Multiplexer

Application 3: Multiple services by separating traffic into two scalable channels with full or subrate T3 or E3 connectivity

Application 1: Point-to-point deployment with remote and local management

Application 2: Linking an ISP POPs backbone via satellite

3

3

HSSI

SSI

Access Multipl

Access Multiplexer

DL3150 Access Multiplexe

Corporate

LAN

Ethernet

Cisco 7204 or

Cisco 3660

NMS

HSS

10/100

RS-232

Modem

T3 / E

Network

PSTN

NMS

Public

NOC

DL3150 Access Multiplexe

T3 / E

RS-23

10/100

Modem

H

Frame Relay Switch

or Cisco 750x

NMS

Microwave Tower

Microwave Transceiver

T3 / E

Cisco Router

Microwave Tower

Microwave Transceiver

Satellite Modem

Uplink: 8 Mbps Downlink: 34 Mbps

T3 / E

H

ISP

Video

L3155 Access Multiplexer

HSSI

H

T3 / E

Public

Network

L3155 Access Multiplexe

T3 / E

HSS

HSSI

Video

Cisco 7204 or

Cisco 3660

Cisco 7204 or

Cisco 3660

© 2007 Quick Eagle Networks. All rights reserved.

0.5k/DP/05/07
The information presented herein may change without notice
and should be used for informational purposes only. DL3150
Access Multiplexer and DL3155 Access Multiplexer are
trademarks of Quick Eagle Networks.

Loaded Network Interface

Network Interface

Line Rate

Connector Type

Line Code

Framing

Pulse Shape

Transmit LBO

Impedance

System Timing

Data Interface

Port

Rate

Connector Type

2nd Data Interface

(Available with DL3155 model only)

Port

Rate

Connector Type

Management Connectors

COMM Port

Fast Ethernet Port

Power Requirements

Voltage

Consumption

Diagnostics

Loopback Tests

Network Port LEDs

Data Port LEDs

Physical

Dimensions

Weight

Environmental

Operating Temperature

Storage Temperature

Relative Humidity
Maximum Altitude

T3 Firmware

(selectable during configuration)

T3 (44.736 Mbps ± 20 ppm)
BNC
B3ZS
Standard M13 or C-bit parity
Meets Bellcore TR-TSY-000009
0 ft to 225 ft, 226 ft to 450 ft
75 ohm unbalanced, resistive
Network, internal, or external

HSSI
Up to 44.2Mbps in multiples of 300 kbps
50-pin socket Amplimitie (HSSI)

HSSI
Up to 44.2Mbps in multiples of 300 kbps
50-pin socket Amplimitie (HSSI)

RJ-45 socket
10/100 Ethernet port

110 VAC to 230 VAC, 47-63 Hz, or -42
VDC to -72 VDC

1.2 amps maximum

Local and remote DTE/network
INS, ALM, RED, YEL, BLU, BPV, DTR
INS, TEST , TD, RD, TA/RTS, CA/CTS, DTR

1 RU, rack mountable

22.3 cm (8.75 in ) W, x 33 cm (13 in) D,
x 4.13 cm (1.63 in) H

2.27 kg (5 lbs.)

0º - 50º C

-35º - 85º C
0 - 95% non-condensing

-6.1 m (-200 ft) to 3,048 m (10,000 ft)

DL3150 / DL3155 Access Multiplexer

E3 Firmware

(selectable during configuration)

E3 (34.368 Mbps ± 20 ppm)
BNC
HDB3
G.751 or clear channel
CCITT G.703
0 ft to 225 ft, 226 ft to 450 ft
75 ohm unbalanced, resistive
Network, internal, or external

HSSI
Up to 34Mbps in multiples of 358 kbps
50-pin socket Amplimitie (HSSI)

HSSI
Up to 34Mbps in multiples of 358 kbps
50-pin socket Amplimitie (HSSI)

RJ-45 socket
10/100 Ethernet port

110 VAC to 230 VAC, 47-63 Hz, or -42
VDC to -72 VDC

1.2 amps maximum

Local and remote DTE/network
INS, ALM, RED, YEL, BLU, BPV, DTR
INS, TEST , TD, RD, TA/RTS, CA/CTS, DTR

1 RU, rack mountable

22.3 cm (8.75 in ) W, x 33 cm (13 in) D,
x 4.13 cm (1.63 in) H

2.27 kg (5 lbs.)

0º - 50º C

-20º - 60º C
0 - 95% non-condensing

-6.1 m (-200 ft) to 3,048 m (10,000 ft)

Order Information

DL3150: DL3150 Access Multiplexer with single HSSI port and single software

selectable T3/E3 network interface

DL3155: DL3155 Access Multiplexer with dual HSSI port and single software

selectable T3/E3 network interface

Northern, Central & Eastern Europe

[e-mail]

Southern Europe, Middle East & Africa

[e-mail]

Asia / Pacific Rim

[e-mail]

Latin, Central & South America

[e-mail]

Canada

[e-mail]

Headquarters

Quick Eagle Networks (USA)

830 Maude Avenue

Mountain View, CA94043

[phone] Phone

[phone] Fax

[e-mail]

www.quickeagle.com