Quick Eagle Networks 4200 SDSL User Manual
Quick Eagle's 4200 SDSL Ethernet BridgeTMoffers you up to 7 Mbps
symmetrical bandwidth on three pairs of copper loops for distances up to
11,000 feet (or 480 Kbps for up to 25,000 feet).
The 4200 SDSL Ethernet Bridge can be deployed in two main ways: You can
configure the 4200 SDSL Ethernet Bridge to bond all three SDSL links in a
single multilink bundle to leverage load balancing and link resiliency. Using
frame-based multiplexing the unit load balances traffic across the links to triple
your bandwidth. When a link is out of service, the unit carries traffic on the
remaining active links. The unit also detects when a link is operational and
adds it back automatically to the multilink bundle.
You can also configure the 4200 SDSL Ethernet Bridge to link the three copper
pairs to different locations. For instance, transportation agencies can take
advantage of the 4200 SDSL Ethernet Bridge's unique feature set to manage
outdated traffic light systems, leveraging their existing copper infrastructure
between different intersections and avoiding the cost of deploying Fiber to
achieve Ethernet-based services such as video monitoring.
The 4200 SDSL Ethernet Bridge uses a learning MAC Bridge to transparently
forward packets from one LAN to another over the SDSL links.
In addition, the 4200 SDSL Ethernet Bridge offers extensive remote management
capabilities, including in-band management on its Ethernet data port or SDSL
port for simultaneous SNMP, Telnet, Ping, and TFTP management access.
Main Features:
• Leverages existing copper infrastructure
• Comes with built-in redudancy for
critical applications
• Supports higher bandwidth by
“multilinking” up to three pairs of copper
• Offers independent links to different
locations
• Supports Spanning Tree Protocol (STP)
• 2B1Q line coding
•
Symmetric transmission (SDSL) from
480 Kbps to 7 Mbps
• 10/100 Ethernet port
• Transparent learning bridge
• Transparent to VLAN (802.1 Q) label
tags
• Embedded SNMP agent
• RMON-2 performance monitoring
enables visibility across the entire
protocol stack for increased network
reliability
• In-band management for plug-and-play
installation and troubleshooting
4200 SDSL Ethernet Bridge
Cost-effective Ethernet over Copper solution to
extend LANs over three copper pairs at 7 Mbp s.
Typical Application:Linking LANs located in separate buildings in campus and multi-building environments
4200 SDSL Ethernet Bridge
3
42
00 SDSL Ethernet Bridge
ge
Model 4200 SDSL
ge
00 SDSL
el 420
Mode
Ethernet Brid
Ethernet Brid
Network Interface
Media
DSL Ports
Connector Type
Line Rate
Line Code
System Timing
Spectrum
Data Interface
Ethernet
Connector
Protocols
RFC1490
Frame Relay
VLAN Support
Monitoring and Management
RMON-2
SNMPAgent
In-band
Telnet
Front Panel
Power Requirements
AC
DC
Consumption
Regulatory
Diagnostics
Loopback Tests
Network Alarms
Front Panel LEDs
Physical
Dimensions
Weight
Range and Reach
Technical Specifications
Unshielded twisted pair (UTP CAT3)
3
RJ-11 socket
160 to 2320 Kbps for each port (480 Kbps to 7 Mbps aggregated)
2B1Q
Internal or network
0 to 784 Khz
10/100 BaseT
RJ-45 socket
Multiprotocol encapsulation over Frame Relay
End-to-end frame-based inverse multiplexing
Transparent to VLAN (802.1Q) label tags
Application, top talker, and protocol performance monitoring
MIB II (RFC1213), Frame Relay MIB, QEN Enterprise MIB
In-band management through SDSL, or Ethernet
Device configuration
Front panel LEDs
100 VAC to 240 VAC, 50-60 Hz
-40VDC to -72 VDC
9 W maximum
FCC Part 15, UL 1950 Third edition; Industry Canada CS-03, VCCI Class 1 CAN/CSAC
22.2 No. 950-95; European Harmonized Standards 74/23 EEC91.31/EED, 89/336/EED,
93/68/EEC, and 91/263/EEC; Commission Federal de Telecommunicaciones; CISPR 22
Level B (EN55022); IEC 60950, RoHS compliant
NET loopback
SNR margin, NET carrier loss
Power/Test, 3 SDSLLinks,Ethernet
1 RU, rack mountable
22.3 cm (8.75 in) W x 4.13 cm (1.625 in) H x 31.44 cm (12.375 in) D
2.27 Kg (5 lbs)
Transmission Distances:
Line Rate (Kbps)
24 AWG (0.5 mm) 26 AWG (0.4 mm)
160 25,000 ft (7.6 Km) 18,600 ft (5.6 Km)
320 23,000 ft (7 Km) 15,500 ft (4.7 Km)
784 19,100 ft (5.8 Km) 13,300 ft (4 Km)
1040 18,000 ft (5.5 Km) 12,200 ft (3.7 Km)
1568 15,000 ft (4.5 Km) 10,800 ft (3.3 Km)
2048 11,000 ft (3.3 Km) 9,000 ft (2.7 km)
2320 10,800 ft (3.1 Km) 8,000 ft (2.4 Km)
© 2007 Quick Eagle Networks. All rights reserved.
PDF/05/07
The information presented herein may change without notice
and should be used for informational purposes only.
4200 SDSL Ethernet Bridge is a trademark of Quick Eagle
Networks. All product and service names mentioned are
trademarks of their respective owners.
Typical
Application: Linking to different locations
Traffic Management Cente
r
et
S
ch
Etherne
de
Vid
Eth
Eth
idge
Model 4200 SDSL
Eth
idge
Model 4200 SDSL
Eth
idge
et
rt #1
DSL Po
DSL
#1
#1
DSL
#2DS
#2
#3
edunda
k
Northern, Central & Eastern Europe
info_uk@quickeagle.com
Southern Europe, Middle East & Africa
info_france@quickeagle.com
Asia / Pacific Rim
info_apac@quickeagle.com
Latin, Central & South America
info_southamerica@quickeagle.com
Canada
info_ca@quickeagle.com
Headquarters
Quick Eagle Networks (USA)
830 Maude Avenue
Mountain View, CA94043
+1 650-962-8282 Phone
+1 650-962-7950 Fax
info@quickeagle.com
www.quickeagle.com
DSL Port
R
nt Lin
DSL Port
ernet Br
Ethern
L Port
ernet Br
DSL Port
DSL Port
Ethern
wit
ernet Br
Video over Copper
Video
Traffic
Controller
Loading...