Quick QUICK2035 Operation Manual

QUICK2035

BGA Rework System

Operation Manual

Thank you for purchasing our Rework System. The system is exclusively designed for reworking and

soldering SMD component. Please carefully read this manual before operating the system. Store this manual

in a safe, easily accessible place for future reference.

Table of Contents

1. Summary…………………………………………………………………………………………………1

2. Specification and Technical Parameter……………………………………………………………………1

2.1 Specification…………………………………………………………………………………………1

2.2 Technical Parameter…………………………………………………………………………………2

3. Product picture……………………………………………………………………………………………3

4. Safety Instruction…………………………………………………………………………………………3

5. Install the unit and use parts ……………………………………………………………………………4

5.1 Place the unit…………………………………………………………………………………………4

5.2 Check the unit………………………………………………………………………………………4

5.3 Connect the unit………………………………………………………………………………………4

5.4 Using parts……………………………………………………………………………………………5

6. Keyboard and parameter setting…………………………………………………………………………6

6.1 Keyboard…………………………………………………………………………………………6

6.2 Parameter setting……………………………………………………………………………………7

A. Input Password………………………………………………………………………………………7
B. Modify working flow…………………………………………………………………………………8
C. Modify working mode…………………………………………………………………………………9

C-1. Modify Parameter of working flow…………………………………………………………………9

D. Modify laser alignment mode………………………………………………………………………13
E. System instruction……………………………………………………………………………………13

7. Technics Instruction………………………………………………………………………………………14

7.1 Soldering Technics…………………………………………………………………………………14

7.2 De-soldering Technics

………………………………………………………………………………15

8. Turn off the system……………………………………………………………………………………15

9. System Maintenance……………………………………………………………………………………16

OPERATION MANUAL

Page 1

1. Summary

Thank you for using QUICK2035 Rework System. This system adopts micro-processor control and

infrared sensor technology to do soldering and de-soldering to surface mount components safely and

accurately and it can also control the whole technological process and record all information by means of the

IR Software, thus meeting the higher technological demands of modern electronic industry. It becomes one of

the most valued electronic equipments in this field.

This Rework System adopts microprocessor control and infrared sensor technology. It has the precision

non-contact infrared temperature sensor for de-soldering parts and the middle wavelength infrared heater. The

soldering process is under the monitoring of non-contact infrared sensor and optimum control of process can

be achieved at any time. In order to get the best technological control and the nondestructive and reproductive

PCB temperature, quick2035 supplies a 2200W heating power, suitable for all application, such as large or

small PCB as well as lead-free process. The technology of re-flow soldering controlled by closed-loop

ensures the precise and smaller technological window, even heat distribution and appropriate peak value of

temperature for lead-free soldering.

The infrared heating tube of QUICK2035, with a uniform and safe heating and power systems and the

flexibility necessary for the large heat capacity of PCB and other high temperature requirements (lead-free

soldering), etc. can be easily addressed.

QUICK2035 with 10 kinds of operating parameters of model, a model for each parameter can be modified.

In addition QUICK2035 also provides effective cooling of the PCB board, for professional users is a

complete, ideal soldering tool.

2. Specification and Technical Parameter

2.1 Specification

1. Max Power 2200W（max）

2. Power of Bottom preheating 1500W (Infrared heating tube)

3. Power of Top heating 720W (Infrared heating tube, Size: 60m×60 mm)

4. Preheating time of Bottom Heater 260*260mm

5. Adjusting rang of Top Heater 20~60mm

6. Heating time of Top Heater Approx 10s ( From room temperature to 230℃)

7. LCD display screen Size: 65.7×23.5 (mm) 16×2 character

8. Communication Standard RS-232C (Connect with PC)

9. Infrared Temperature sensor 0~300℃ (Testing range)

10. Outside K type sensor Optional

11. Dimension 33×38×44 (cm)

12. Weight 20Kg

Note: When purchasing the equipment, please point out the working voltage.

OPERATION MANUAL

2.2 Technical Data

TL: Melting temperature of solder

T1: Heat preservation starting temperature of reflow soldering

T2: Heat preservation ending temperature of reflow soldering

T3: Peak value temperature of soldering and de-soldering

T0: Valve temperature: The lowest temperature of bottom heater when top heater heats up. T0<TB

TB: The set temperature of bottom heater

Tb: The real time temperature value of bottom heater

TC: The real time temperature value of top heater

S1: Heating time rising from T1 to T2

S2: Heating time rising from T2 to T3

S3: Heat preservation time of T3

3. Product Picture

Top infrared heater Cooling fan

PCB supporting bar

Before and after the

fixed-mobile frame knob

PCB lock knob

Bottom infrared heate

r

Display

4. Safety Instructions

Note: For safety of system and operator, please read this manual carefully before operating the unit.

Please note that the unit is suitable for soldering and de-soldering of electronic components.

Note: Top and bottom IR heater will be very hot during working, so explosive and combustible object or gas

and solvent is strictly prohibited in working areas, also please don’ touch the hot housing parts.

Page 2

OPERATION MANUAL

Note: The laser alignment device includes a secondary laser device, so don’t see the laser bean directly.

Note: When the system is in trouble and needs maintenance, it should be maintained by an experienced and

authorized technicist or mavin, or contact with service agent or our company.

The inside of the unit with dangerous voltage! The inexperienced servcing is dangerous for operators.

5. Install the Unit and Adjust Parts

5.1 Place the Unit

Unwrap the packing of the unit, then take it out and put it on the solid level worktable. Put QUICK2035 main

unit on the base plate.

5.2 Check the Unit

Please check whether the following parts are in good condition and they aren’t missed.

* QUICK2035 Main unit

* IR Base plate with PCB Fixture (Optional)

* Power cord

* Operation Manual

* IRsoft Disc

* RS232 cable

* External cooling fan (Optional)

* Monitor (Optional)

Note: The parts will be packed according to the packing list, if you don’t purchase the optional part and it

isn’t in the package. If any above part is missed out, please contact with our company or agents

immediately.

5.3 Connect the Unit

* Please check whether the power voltage accords with the rated voltage on the equipment nameplate.

* Please check whether the switches are turned off. (Set to “0”)

* Connect Power cord to the power socket behind equipment.

* If you use IR Soft, please connect the RS232 connecting cord to the RS232 socket behind the unit.

After finishing above steps, insert power plug into power socket, and switch on power.

Page 3