Quick Outdo 600 Pro, Outdo 600 Sport Assembly And Maintenance Manual

Sport/Pro

HELICOPTER

First Edition

MAINTENANCE MANUAL

Page 1 of 60

ASSEMBLY

AND

WWW.QUICKHELI.COM

TABLE OF CONTENTS

INTRODUCTION 3

CUSTOMER SERVICE 4

FEATURES 5

PRE-ASSEMBLY INFORMATION 6

REQUIRED TOOLS 7

HARDWARE AND OPTIONAL ACCESSORIES 8

OTHER REQUIREMENTS 10

SECTION 1- UPPER FRAME 12

SECTION 2: MAIN FRAME 23

SECTION 3: DRIVING SYSTEM 30

SECTION 4: TAIL ASSEMBLY 32

SECTION 5: CONTROL SYSTEMS 37

SECTION 6: ROTOR HEAD 39

SECTION 7: LINKAGE AND FINAL SETUP 42

SECTION 8: SETTINGS 46

PRE-FLIGHT CHECKS 53

WARNING 54

ADJUSTMENTS 55

HOW TO HOVER 56

HOW TO FLY FORWARD 58

AFTER FLIGHT CHECKS 60

WHAT IF THE HELICOPTER CRASHED 60

Page 2 of 60

INTRODUCTION

Congratulation and thank you for the purchase of great product! It is our sole desire for
you to enjoy the quality workmanship and performance of any of our electric Li-Po
powered helicopters. We believe we have the latest designs and technology
incorporated into our model helicopters. Our CNC parts are produced using the best
high density materials & anodized using material hardening finishes with the tightest of
tolerances. Our new helicopters feature the latest advances in R/C helicopter
design. The simple and mechanically superior EMS design (also known as CCPM)
ensures a helicopter that will be more responsive and more stable than any other R/C
helicopter you have ever flown. Three servos are attached directly to the Swashplate to
ensure precise control. This kit features all metal construction, and a carbon or
composite frames are standard. Along with great products, our staffs are RC guys that
fly and have hands on experience with total manufacturing & testing of our helicopters.
In addition, we stand behind all our products 100% with satisfaction guaranteed.

In the past several years, we have been devoting ourselves to developing electric
powered helicopters. We feel that our electrics now are more powerful, smoother, and
more responsive than most of the nitro machines in the market. In addition, there is less
time for maintenance and no more dirty of oil and gas. With new technology of batteries
and electric motors, the flying time and the efficiency increase significantly day by day.
We believe so much in our electric helicopters that we have given out for reviews to our
fellow hobbyists EP kits of four different motors and Li-Po battery classes. Electric
powered helicopters are here now to stay and will in time be bigger than the current nitro
market. The market has some very mixed ideas about electric and their safety. Our staff
is here to answer all of your technical questions. Our kits will be shipped 100% complete
and we can assure you that once you fly your EP helicopter you will love it.

The OutDo 600

We believe you hold in your hands one of the best helicopters manufactured in the world
today. The OutDo 600 is built on the same platform as the Q50, but carries the
power and punch of the Q70 delivered smoothly throughout the entire range of its
electric motor. The OutDo 600 Pro features a fully machined head, metal grips,
carbon fiber frames, and carbon fiber boom supports. The OutDo 600 Sport
version features a G10 fiberglass frame, and molded main blade grips and tail blade
grips. Our helicopters are carefully designed and tested, and manufactured of the
highest quality materials available.

In a short time, you can be flying.
We ask that you please read the entire manual before starting the construction of the

OutDo 600, and if you have any questions our technical support staff can be reached
at

[phone] M-F 9-6, S 9-4 Eastern time,

or by email at

For the latest information and updates, please visit our website at

www.quickworldwide.com

[e-mail].

Page 3 of 60

CUSTOMER SERVICE

Quickworldwide

201 South 3

rd. St. & 309 N.

Coopersburg, PA 18036

Phone: [phone]
Fax: [phone]

Office Hours:

Mon – Fri: 8:30 – 6:00
Sat: 8:30 – 1:30

(Eastern Daylight Time)

Technical Support Personnel:

Chuck – [e-mail]

Jon –

[e-mail]

Websites:

http://www.hhiheli.com
http://www.quickheli.com
http://www.giantscaleplanes.com

E-mail:

[e-mail]

Page 4 of 60

FEATURES

QUICK OUTDO-600

1. Frame Construction: Quick OutDo 600 frames are made of the highest

Quality Black G-10 Frames or Carbon Fiber. These frames are not only rigid but will
provide excellent vibration absorption.

2. Constant Tail Rotor Drive System: provides full tail authority during

engine off maneuvers.

3. Belt driven Tail: Smooth, reliable, and low maintenance.

4. High Quality Ball Bearings: Quick OutDo 600 offers ball bearings on all

moving parts.

5. EMS Collective System: The EMS Collective design allows ease of setup

with fewer moving parts. EMS demonstrates overall design simplicity and represents the
future of helicopter technology.

6. Control Linkages: The control linkages provided with the Quick Learner Kit

are high quality 2.3mm stainless steel rods with Delrin® acetal resin rod ends.

7. Single Blade Axle Design: simple, very responsive, with exceptionally

consistent flight characteristics.

8. Advanced Airfoil Fly-bar Paddles: These paddles will provide the best

flight characteristics for both 3D & Sport flying: Smooth forward flight, with quick
response upon demand.

Page 5 of 60

PRE-ASSEMBLY INFORMATION

Warning:

The radio-controlled model helicopter contained in this kit is not a toy.

Rather, it is a sophisticated piece of equipment. This product is not recommended for
use by children without adult supervision. Radio controlled models such as this are
capable of causing both property damage and/or bodily harm to both the
operator/assembler and spectators if not properly assembled and operated. Hobbies &
Helis assumes no liability for damage that could occur from the mis-assembly and/or
use/misuse of this product.

Academy of Model Aeronautics

We strongly encourage all prospective and current R/C aircraft pilots to join the
Academy of Model Aeronautics. The AMA is a non-profit organization that provides
services to model aircraft pilots. As an AMA member, you will receive a monthly
magazine entitled Model Aviation, as well as a liability insurance plan to cover against
possible accident or injury. All AMA charter aircraft clubs require individuals to hold a
current AMA sporting license prior to the operation of their model. For further information,
please contact AMA at:

Academy of Model Aeronautics

5161 East Memorial Drive

Muncie, IN 47302-9252

USA

Phone: [phone]

www.modelaircraft.org

Before you begin:

Quick Helicopter kits are packaged with care and attention to detail. We recommend
when you are ready to begin building this model that you examine the kit carefully,
inspect the contents of each package, and read and understand these instructions
thoroughly before starting assembly. It is suggested that you purchase a parts box for
the small fasteners and hardware, or use small bowls or other containers.

Page 6 of 60

REQUIRED TOOLS

Page 7 of 60

HARDWARE & OPTIONAL ACCESSORIES

GLUES AND THREAD LOCK COMPOUNDS

RADIO MOUNTING ACCESSORIES

Page 8 of 60

OTHER HARDWARE & OPTIONAL ACCESSORIES

3MM FLYBAR STIFFENERS
HHI 402

60 SIZE SKID STOPS
HHI 200 AVAILABLE IN COLORS

SERVO ARM SET

LANDING GEAR DAMPENERS
HHI 2004

BASE LOAD ANTENNA

HHI 53**

AVAILABLE IN BLUE, GOLD,

PURPLE

AND IN 40, 50, AND 72 Mhz

Page 9 of 60

W

W

W

W

W

W

FINISHING CAPS

• Adds color and style

• Distributes force across larger surface area

3mm 4mm

(20 pcs in a package) (8 pcs in a package)

BLACK HHIM11100B ---

ITHOUT

ITH

ITH

ITHOUT

ITH

ITHOUT

BLUE HHIM11103 HHIM11108
GOLD HHIM11101 HHIM11106
GREEN HHIM11100G --­PURPLE HHIM11100 HHIM11105
RED HHIM11100R --­SILVER HHIM11100 HHIM11107

SERVO FIXING PLATES

• Transmits force of fastener to

plastic instead of rubber
HHI 1205 SERVO MOUNT KIT

• Includes hardware and fixing

plates to mount 5 servos

Page 10 of 60

OTHER REQUIREMENTS

Radios:

Any radio that supports EMS/CCPM Mixing will work fine. Hobbies & Helis & its
distributors carry various lines of helicopter radios.

Servos

Any sport servo will offer acceptable performance. However, because servos
operate all critical functions of the helicopter, they can be the single most
important component that contributes to proper function of the helicopter. Due to
the nature of EMS collective, we suggest the use of digital servos to enhance

and ensure matched servo timing without servo interaction

:

.

Locktite Warning (CRITICAL):

This is a general warning about the use of Locktite and its
importance. Locktite must be used anywhere that a metal

fastener i.e. (M2, M3, M4 Cap Head Bolts, Set Screws etc.) is
threaded into a metal part i.e. (Bearing Blocks, Cross-members,

etc.). Failure to use Locktite can result in loosening of critical
operating components, loss of control of the model, and can
lead to a crash.

Page 11 of 60

ASSEMBLY

SECTION 1: UPPER FRAME BAG 1

In your kit, parts are bagged according to each major assembly and are labeled “Bag

•
1, Bag 2, etc.” You will note that the heading for each assembly indicates which bag
correlates with each assembly.

• For a good installation, only open up the bag that you need for particular assembly.

• Please check the parts in that bag against the parts list shown for each assembly as

well as each subassembly to make sure there are no missing parts.

• Small parts such as nuts and bolts can be put into containers or trays to prevent
losing parts.

• Part No. with ***** means that part is not included in the kit.

Page 12 of 60

1-1 ELEVATOR SHAFT BEARINGS

No. Part No. Description Qty
1 QF551C Upper Frame (from Frame Bag) 2
2 BRG05104F 5X10X4Flanged Bearing 2

Note: The bearing flange mates against the inside of the frame

Page 13 of 60

1-2 LEFT AILERON & RUDDER SERVO SUBASSEMBLY

No. Part No. Description Qty
1 1-1 L. Upper Frame Subasssembly 1
2 ***** Servo 2
3 HHI2.5M14 M2.5x14 Cap Head Bolt 8
4 HHI2.5MLN M2.5 Locknut 8

Note: If the servos come with anti-vibrating rubber, insert them on the servos first. We
recommend using the servo fixing plates to protect and get the best performance from
the servos. Please see “Hardware & Optional Accessories” for more details.

Page 14 of 60

1-3 RIGHT AILERON & ELEVATOR SERVO SUBASSEMBLY

No. Part No. Description Qty
1 1-1 R. Upper Frame Subassembly 1
2 ***** Servo 2
3 HHI2.5M14 M2.5x14 Cap Head Bolt 8
4 HHI2.5MLN M2.5 Locknut 8

1-4 INNER ELEVATOR CONTROL ARM SUBASSEMBLY

No Part No. Description Qty
1 QC557 Inner Elevator Control Arm 1
2 QF537 Elevator Control Shaft 1
3 HHI3M05SS M3x5 Set Screw 1
4 HHI3M6PS M3x6 Pivot Ball Stud 1

Page 15 of 60

1-5 TAIL TRANSMISSION SUBASSEMBLY

No Part No. Description Qty
1 QD551B Counter Gear 1
2 QD551A Counter Gear Shaft 1
3 QD551C Counter Gear Lock Pin 1
4 QPM4CLIP M4 E-clip 2
5 QD553 Counter Gear Bearing Block 2
6 QD575 Pulley Gear Plate 1
7 QD554A Pulley Gear Block Pin 1
8 QD504 Pulley Gear 1

-Install Counter Gear to Counter Gear Shaft using Counter
Gear Lock Pin (No. 3) and M4 E-clip to secure it

-Put Counter Gear Bearing Block (the lower) in with the
Flange facing up

-Install Counter Gear Bearing Block (the upper) with the
Flange facing down

-Install Pulley Gear Plate (No. 6)

-Insert Pulley Gear Lock Pin (No. 7)

-Install Pulley Gear and retain with M4 E-clip

Page 16 of 60

1-6 UPPER FRAME INSTALLATION

1-6-a ELEVATOR CONTROL ARM-RIGHT SIDE

No. Part No. Description Qty
1 1-3 R. A&E Arm Subassembly 1
2 1-4 Inner El. Ctrl. Arm Subassembly 1
3 QC552 Outer Elevator Control Arm 1
4 HHI3M05SS M3x5 Set Screw 1
5 HHI3M4PS M3x4 Pivot Ball Stud 5
6 QF567 M3x5x3 Spacer 1
7 QC524R Right Aileron Control Lever 1
8 HHI3M12C M3x12 Cap Head Bolt 1

Note: For No. 2 (Inner Elevator Control Arm Sub.), the Inner Elevator Control Arm
should be next to the upper right frame.

Page 17 of 60

1-6-b ANTI-ROTATION GUIDE ASSEMBLY (SPORT MODEL)

No. Part No. Description Qty
1 1-6-a Right Upper Frame (up to step 1-6-a) 1
2 QF673 Washout Anti-Rot. Guide 1
3 QF567 M3x5x3 Spacer 2
4 HHI3M45C M3x45 Cap Head Bolt 2

Page 18 of 60