Page 1
Security Instructions
Read the instructions very carefully before the rst
use and keep it for next uses.
Any use not in accordance with the instructions will
free the manufacturer from any responsibility.
The PerfectDry Lux® must be used by a person with full
intellectual capacities. No other restriction applies to
the user.
Keep out of reach of children.
Any intervention, other than usual cleaning and
maintenance from the user, must be operated by the
Aftersales Service or a professional.
Never put your PerfectDry Lux®, power supply or cable
under water or any other liquid. If the power plug or the
cable are damaged, do not use the device. Replace your
power supply with an original one. Never use detergent
or corrosive product to clean your PerfectDry Lux®.
Warning : Any use not in accordance with these
instructions will cancel the warranty.
The manufacturer cannot be held responsible for
damages caused by a misuse or bad manipulation of
the product.
Description
The PerfectDry Lux® is an electronic device for the
maintenance and the storage of all kind of hearing aids.
This maintenance is ensured by the combination of a
forced-air fan drying system and UV-C rays disinfection.
Note:
- The UV-C lamp is a surface disinfectant and it has few
or no penetrating qualities, which means it cannot
damage the earmold or plastics of the hearing aids.
UV-C disinfection
The PerfectDry Lux® is equipped with a short emitting
waves UV-C lamp, whose 360° circular disposition
enables to reach all the surfaces of the hearing aids.
The exposition of surfaces to the UV-C light allows to
destroy 99% of fungi and bacteria, and dramatically
reduces itchiness and infections of the ear canal.
The lamp will turn itself on during the rst ve minutes
of the drying cycle, then turn itself o automatically.
Dehumidication - Drying
The PerfectDry Lux® is equipped with a forced-air fan
drying system, which enables to reduce the power and
time necessary for the drying cycle.
The temperature of the drying chamber is controlled
by an electronic system in order to maintain a
constant temperature of 45°C, whatever the ambient
temperature surrounding the device, and to prevent
the hearing aids from any damages.
Technical data
Features
- External dimensions l x h x p (mm): 92 x 48 x 75
- Internal dimensions l x h x p (mm): 70 x 21 x 51
- Weight (g): 160
- Power supply: 5Vdc / 0,5A
- Maximum power: 2.5W
- Stand by power: <0.02W
- UV-C wavelength: 253.7nm
- Acoustic Level <20 dBA
- Drying temperature: 45°C +/-3
- Operating temperatures: from 12° to 40°C
- Storage conditions: from -20° to 65°C
- Software Version 01.00
- USB cable length: 1.5m
Power connector
- Input: 100-247Vac - 50-60Hz - 0.15A
- Output: 5Vdc / 1A
Identifying information
You will nd the data sheet under your
PerfectDry Lux®.
Abbreviation signication:
Volts (Power supply tension)
Ampère (Energy consumption)
USB power symbol
Inside use
This product is an ABS production recycled to 7%
This product complies with the applicable
European directives.
ELIMINATION
Throw the old material out in an ecological way.
The old devices are made with recycling material
which must be recycled. Be careful to throw your old
devices out in the right recycling system.
PerfectDry Lux® is guaranteed for 36 months, except for
the power supply (24 months), from the date of purchase.
For any failure or breakdown, contact your hearing aid
specialist. A purchase proof will be asked from Aftersales
Service during the guarantee period. This guarantee will
not be valid for any use not in accordance with these
instructions, for an accident, a liquid introduction, a
negligence, a maintenance lack or any other circumstance
caused by the user. Furthermore the guarantee will not be
valid for any problem caused by lightnings or a variation in
the electrical voltage. As a precaution we recommend to
unplug the device in case of storms.
V
A
Guarantee
User Instructions
PerfectDry Lux
®
UV-C disinfection
and quick dehumidication
of hearing aids
This box set includes:
- 1 PerfectDry Lux®
- 1 USB cable
- 1 Power connector
- 1 User manual
Page 2
User Instructions | PerfectDry Lux
®
1
2
3
PC
OR
Touch x1 = Fast c ycle
30 min.
Touch x2 = Intensive cycle
1h
Plug the USB power supply on the back of
the PerfectDry Lux®. Then plug the cable on
the USB slot or on the electrical socket. The
pilot lights blink, indicating that the device
is on.
Before placing your hearing aids into the
PerfectDry Lux®, clean and wipe them
to remove earwax and impurities. If it is
possible, place your hearing aids with the
battery housing open for an optimum
dehumidication process. Close the lid of
the PerfectDry Lux®.
Touch the start button to select your drying
cycle:
Touch once to start a fast drying cycle of
30 minutes, the light on the left turns on.
Touch twice to start a intensive drying
cycle of 1h, both lights turn on.
After one minute, without any action, the
PerfectDry Lux® will activate the stand-by
mode and the lights will turn themselves o.
Touch the start button once to reactivate the
device, then select the drying cycle you need.
The PerfectDry Lux® will stop automatically at
the end of the drying cycle and the pilot lights
will turn themselves o. If you need to stop
an ongoing drying cycle, you simply need
to open the lid and it will stop automatically
(security feature).
31
2
Precaution of use
- Place the PerfectDry Lux® on a stable and dry base.
- Do not stare directly at the UV-C lamp located inside
the drying chamber.
- To unplug the device from the socket, pull on the
power plug directly but do not pull on the power cord.
Maintenance advice
Clean with a soft cloth. Do not use any powerful or
abrasive cleaning products to clean the PerfectDry Lux®.
Do not spray any liquid into the box. Keep the PerfectDry
Lux® with the lid closed when you are not using it to avoid
the deposit of impurities on the UV-C lamps.
MG0 NOTLUX-UK_141020
PerfectDry Lux
®
MG Développement
ZA aéroport de Montpellier
34470 Pérols - FRANCE
Designed and
assembled in France
Loading...