Queclink Wireless Solutions EA00004 User Manual

Download

EA00004 User Manual

Telematics Device EA00004

QSZTRACEA00004UM0101

Version: 1.01

QSZTRACEA00004UM0101

EA00004 User Manual

Document Title

EA00004 User Manual

Version

1.01

Date

2020-02-26

Status

Released

Document Control ID

QSZTRACEA00004UM0101

This document contains proprietary technical information which is the property of Queclink. Copying of this document, distribution to others or using or communication of the contents thereof is forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of a patent grant or registration of a utility model or design. All specifications supplied herein are subject to change without notice at any time.

QSZTRACEA00004UM0101

EA00004 User Manual

Contents

0. Revision History ............................................................................................................................. 1

1. Introduction .................................................................................................................................. 2

1.1. EA00004 Series Products .................................................................................................... 2

1.2. Reference ........................................................................................................................... 2

1.3. Terms and Abbreviations .................................................................................................... 2

2. Product Overview .......................................................................................................................... 3

2.1. Product Appearance ........................................................................................................... 3

2.2. Parts List ............................................................................................................................. 3

3. Interface Definition ....................................................................................................................... 3

4. Device Cable Color ........................................................................................................................ 5

5. Started ........................................................................................................................................... 6

5.1. Opening and Closing the Casing ......................................................................................... 6

5.2. Installing a SIM Card ........................................................................................................... 6

5.3. Power Supply Connection .................................................................................................. 7

5.4. CAN Connection ................................................................................................................. 7

5.5. Extra USB Connection ........................................................................................................ 7

5.6. Throttle ............................................................................................................................... 8

5.7. Brake Right ......................................................................................................................... 8

5.8. Brake Left ........................................................................................................................... 8

5.9. Headlight ............................................................................................................................ 9

5.10. Speaker ............................................................................................................................. 9

6. Basic communicate ..................................................................................................................... 10

7. BLE ............................................................................................................................................. 10

7.1. BLE working mode explanation .................................................................................... 10

7.2. BLE instructions ............................................................................................................. 10

8. NFC .............................................................................................................................................. 10

8.1. NFC working mode explanation .................................................................................... 10

8.2. NFC instructions ............................................................................................................. 10

9. WiFi ............................................................................................................................................. 10

9.1. WiFi working mode explanation ................................................................................... 10

9.2. WiFi instructions ............................................................................................................ 11

10. FCC Certification ........................................................................................................................ 12

11. IC Certification ........................................................................................................................... 13

QSZTRACEA00004UM0101

0. Revision History

Version

Date

Author

Description of change

1.00

2020-02-26

Heymi Lin

Initial Version

QSZTRACEA00004UM0101 1

1. Introduction

Model No.

Region

Technology

Operating Band (MHz)

EA00004

Worldwide

Document name

Remark

[1]

EA00004 @Track Air Interface Protocol

The air protocol interface between EA00004 and backend server.

Abbreviation

Description

RXD

Receive Data

TXD

Transmit Data

OUT1

Output 1

OUT2

Output 2

IGN

Ignition

IN1

Input 1

GND

Ground

VIN

External DC Power Input

The Vehicle Control Module EA00004 integrates the components and functions such as OLED display, headlight control, Powertrain Control Module (PCM), Battery Module, brake actuator, throttle actuator, and speaker while providing communication with integrated Wi-Fi, Bluetooth and GPS positioning modules. The EA00004 is designed to integrate within the scooter to provide communication to Bird Servers via LTE, provide local Bluetooth and 802.11 communications, and control vehicle behaviors such as remotely lock/unlock, track vehicle position, report status of the scooter. Additionally, by using the button on the panel, the user can perform numerous functions that will be region specific and determined by Bird in deployment via firmware update. Selected information will be reported to the backend sever to facilitate the basic functions of the scooter.

1.1. EA00004 Series Products

Table 1. EA00004 Products

LTE FDD: B2/B4/B5/B7/B8/B12/B13/

LTE-FDD/LTE-TDD/ UMTS/GSM

B20/B25/B26

LTE TDD: B38/B41

UMTS: B2/B4/B5

GSM: B2/B5

1.2. Reference

Table 2. EA00004 Protocol Reference

1.3. Terms and Abbreviations

Table 3. EA00004 Terms and Abbreviations

QSZTRACEA00004UM0101 2

2. Product Overview

Name

Picture

Description

EA00004

125.5mm*62.08mm*101.0mm

EGPRS/LTE Cat-M1/LTE Cat-NB1/GNSS tracker

SIM Card Holder

2.1. Product Appearance

2.2. Parts List

Figure 1. EA00004 Appearance

Table 4. EA00004 Series Parts List

3. Interface Definition

The EA00004 harness have 24-pin interface connector. It contains the connections for power, Speaker, headlight and so on. The sequence and description of the connector are shown in the following figure:

QSZTRACEA00004UM0101 3

Figure 2. 24-pin Connector of the EA00004

Index

Description

Comment

GND

Power GND

36V Perm

Power 12V

CAN_L

PWR_ENA

Power ENA

CAN_H

BR2_5V

BR2_Input

BR2_GND

BR1_5V

BR1_Input

BR2_WP

BR2_Wake up

BR1_GND

BR1_WP

BR1_Wake up

TR_5V

Throttle Input

TR_WP1

Throttle Weak up1

TR_GND

Throttle GND

TR_WP2

Throttle Weak Up2

USB_ID

USB ID

USB_VBS

USB_GND

USB_D-

USB GND

USB_D+

USB Input

SPK-

SPK GND

LED-

Headlight GND

SPK+

SPK INPUT

LED+

Headlight INPUT

Table 5. Description of 24-pin Connections

QSZTRACEA00004UM0101 4

4. Device Cable Color

Definition

Color

Pin No.

Cable

GND

Black

36V Perm

Red

CAN_L

Green

PWR_ENA

Blue

CAN_H

Yellow

BR2_5V

Red 6 BR2_GND

Black

BR1_5V

Red

BR2_WP

Green

BR1_GND

Black

BR1_WP

Orange

TR_5V

Red

TR_WP1

Yellow

TR_GND

Black

TR_WP2

Blue

USB_ID

Gray

USB_VBS

Red

USB_GND

Black

USB_D-

White

USB_D+

Green

SPK-

Gray

LED-

White

SPK+

Gray

LED+

Green

Table 6. EA00004 Device Cable Color Definition

QSZTRACEA00004UM0101 5

5. Started

5.1. Opening and Closing the Casing

Figure 3. Open Top Cover

To open/close: Loosen or fasten the screws to open or to close.

5.2. Installing a SIM Card

Install the SIM card into the holder when power is off as shown blow. Take care to align the cut mark, and then close the case.

Figure 4. SIM Card Installation

QSZTRACEA00004UM0101 6

5.3. Power Supply Connection

The red wire is power line ,the black wire is ground line and blue wire is power EAN line . The input voltage range for this device is from 12V to 60V DC.

Figure 5. Example of Connection for power

5.4. CAN Connection

The yellow wire is CAN_H line, the green wire is CAN_L line. Need connect CAN-Bus tools for communication.

Figure 6. Example of Connection for CAN

5.5. Extra USB Connection

P4 Gray wire is USB ID line, the white wire is USB_D- line, The green wire is USB_D+ line, P5 red wire is power line, the black wire is ground line. P4 is for signal, P5 is for supply power.

Figure 7. Example of Connection for USB

QSZTRACEA00004UM0101 7

5.6. Throttle

The blue wire is throttle weak up 2 line, the black wire is ground line, the red wire is power line, the yellow wire is throttle weak up 1 line.

Figure 8. Example Connection to Throttle

5.7. Brake Right

The black wire is ground line, the red wire is power line, the orange wire is weak up line.

Figure 9. Example connection to brake right

5.8. Brake Left

The black wire is ground line, the red wire is power line, the green wire is weak up line.

QSZTRACEA00004UM0101 8

Figure 10. Example connection to brake left

5.9. Headlight

The white wire is ground line, the green wire is power line.

Figure 11. Example connection to headlight

5.10. Speaker

The white wire is ground line, the green wire is power line.

Figure 12. Example connection to speaker

QSZTRACEA00004UM0101 9

6. Basic communicate

EA00004 Can communicate with the backend server through LTE Cat-M network, and transfer reports of emergency, Geo-fencing, device status and schedule GPS position ect…service provider is easy to setup their tracking platform based on the functional wireless.

7. BLE

7.1. BLE working mode explanation

EA00004 is installed in the shared scooter and supplied by the main battery of scooter. With the external power(main battery of scooter) supplying , the BLE of EA00004 works. Otherwise with the backup battery of EA00004 supplying, BLE stops working.

7.2. BLE instructions

Heartbeat packet uploaded from EA00004 to Server includes 20 bytes dynamic password (BLE command password).After successfully connected with the BLE of EA00004,It is able to send command <AT+BKSCT=BLE Command Password,0$> to unlock Scooter or <AT+BKSCT=BLE Command Password,1$>to lock Scooter by BLE channel.

8. NFC

8.1. NFC working mode explanation

EA00004 is installed in the shared scooter and supplied by the main battery of scooter. With the external power(main battery of scooter) supplying , the NFC of EA00004 works. Otherwise with the backup battery of EA00004 supplying, NFC stops working.

8.2. NFC instructions

Use the handheld terminal to scan EA00004, and when the signal is received, the handheld

terminal and EA00004 can be connected

9. WiFi

9.1. WiFi working mode explanation

EA00004 is installed in the shared scooter and supplied by the main battery of scooter. With the external power(main battery of scooter) supplying , the WiFi of EA00004 works. Otherwise with the backup battery of EA00004 supplying, WiFi stops working.

QSZTRACEA00004UM0101 10

9.2. WiFi instructions

Use the USB cable to configure the software of the product (the software will define that

the product will automatically open WIFI function). After WiFi is turned on, the MAC

address of the nearby WiFi signal will be searched; the signal will be sent to the background

terminal through LTE function of the product, and the background terminal will locate the

signal.

QSZTRACEA00004UM0101 11

10. FCC Certification

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected. —Consult the dealer or an experienced radio/TV technician for help.

QSZTRACEA00004UM0101 12

11. IC Certification

ISED RSS Warning:

This device complies with Innovation, Science and Economic Development Canada

licence-exempt RSS standard(s). Operation is subject to the f

conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of

the device.

Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d'en compromettre le fonctionnement.

ISED RF exposure statement:

This equipment

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator& your body.This transmitter must not

be co-located or operating in conjunction with any other antenna or transmitter.

complies with ISED radiation exposure limits set forth for an

ollowing two

Le rayonnement de la classe b repecte ISED fixaient un environnement non

contrôlés.Installation et mise en œuvre de ce matériel devrait avec échangeur

distance minimale entre 20 cm ton corps. Lanceurs ou ne peuvent pas coexister

cette antenne ou capteurs avec d’autres.

QSZTRACEA00004UM0101 13

Queclink Wireless Solutions EA00004 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual