Qubino FLUSH 1D RELAY USER MANUAL

USER MANUAL EN.
QUBINO FLUSH 1D RELAY
The Qubino Flush 1D Relay is ideal for remotely controlling one electrical device (door lock,
door opener, small appliances, etc.). The output contact is voltage free (dry contact), so
different power supply loads can be connected to the Flush 1D Relay.
EN.
Table of contents
About Qubino .................................................................................................................................. 4
Safety Information .......................................................................................................................... 6
Flush 1D Relay - Available Frequencies .......................................................................................... 7
Where To Buy.................................................................................................................................. 8
1. Introduction ................................................................................................................................ 8
2. Use Cases .................................................................................................................................. 10
2.1. Installation examples where Flush 1D Relay is installed behind a wall switch ................. 10
2.2. Installation examples where Flush 1D Relay is installed in electrical box ......................... 12
2.3. Additional features of Flush 1D Relay which can make your life easier ............................ 14
3. Qubino Flush 1D Relay Advantages and Highlights .................................................................. 15
3.1. Advantages ......................................................................................................................... 15
3.2. Highlights ........................................................................................................................... 18
4. Package Contents ...................................................................................................................... 19
5. Technical Terms for Switches ................................................................................................... 20
6. Compatibility with Z-Wave Gateways (hubs) ........................................................................... 22
7. Installation ................................................................................................................................ 23
7.1. Installing the device behind a light switch ......................................................................... 24
7.2. Installing the Qubino Temperature Sensor ....................................................................... 31
8. Device Information and Support............................................................................................... 36
9. Electrical Diagram (110 - 240VAC, 24VDC) ............................................................................... 37
10. Adding the device to a Z-Wave network (Inclusion) ............................................................... 39
11. Removing the device from a Z-Wave network (Exclusion) ..................................................... 40
12. Associations ............................................................................................................................ 41
13. Configuration Parameters ....................................................................................................... 42
14. Technical Specifications .......................................................................................................... 49
EN.
15. Z-Wave Command Classes ...................................................................................................... 51
16. Important Disclaimer .............................................................................................................. 54
17. Warning ................................................................................................................................... 54
18. Regulations.............................................................................................................................. 54
EN.

About Qubino

Qubino is a family of innovative Z-Wave devices, many of them the smallest of their kind. Numerous breakthrough innovations, 100% quality control, and responsive customer service make Qubino the number one choice for making your life more comfortable.
Qubino enables you to transform – inexpensively and invisibly – any traditional electric device into a smart, connected one that you can control with your smart phone. Qubino devices are simple to install and use, but also extremely versatile - they offer a wealth of additional features and parameters for you to play with.
We love helping people who enjoy creating new ideas for their home and then using their hard work and skill to turn those ideas into reality. We admire their passion and resourcefulness. We do our best to supply you with products that will enable you to create a unique and special home for yourself. We innovate so that you can be free to make the smartest home possible. With just a touch of magic.
"Simple is smart." We believe it is smart to make complex things simple. But only when this means simple for our customers, not for ourselves. We think a lot so that you won't have to when it comes to installing or using our devices.
For more information visit: www.qubino.com
EN.
About Z-Wave:
The Z-Wave protocol is an interoperable, wireless, RF-based communications technology designed specifically for control, monitoring, and status reading applications in residential and light commercial environments. Mature, proven, and broadly deployed (with over 50 million products sold worldwide), Z-Wave is by far the world market leader in wireless control, bringing affordable, reliable, and easy-to-use 'smart' products to millions of people in every aspect of daily life.
Source: www.z-wavealliance.org
EN.

Safety Information

For Qubino, safety is first, so we have prepared lots of safety tips and information that can be found throughout this manual.
To ensure your safety, please read this manual carefully before installing the device; follow the instructions exactly. The manufacturer (GOAP d.o.o. Nova Gorica) shall not be legally
responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
Please check the Technical Specifications and Electrical Diagram chapters, as well as fuse
requirements in the Installation chapter before installing the device.
EN.

Flush 1D Relay - Available Frequencies

ORDERING CODE
(MODEL NUMBER)
POWER SUPPLY FREQUENCY
Z-WAVE FREQUENCY*
ZMNHND1
50/60 Hz
868,4 MHz
ZMNHND2
50/60 Hz
921,4 MHz
ZMNHND3
50/60 Hz
908,4 MHz
ZMNHND4
50/60 Hz
869,0 MHz
ZMNHND5
50/60 Hz
916,0 MHz
ZMNHND6
50/60 Hz
868,4 MHz
ZMNHND7
50/60 Hz
919,8 MHz
ZMNHND8
50/60 Hz
865,2 MHz
ZMNHND9
50/60 Hz
922,5 MHz
ZMNHNDA
50/60 Hz
919,7 – 921,7 – 923,7 MHz
ZMNHNDB
50/60 Hz
868,1 MHz
ZMNHNDC
50/60 Hz
868,1 MHz
ZMNHNDD
50/60 Hz
919,8 MHz
ZMNHNDE
50/60 Hz
920,9 MHz
*You can check the Z-Wave frequency in your country here:
https://www.silabs.com/products/wireless/mesh-networking/z­wave/benefits/technology/global-regions?cid=nat-acq-zwv-041818
EN.

Where To Buy

To find your nearest Qubino dealer visit: http://qubino.com/where-to-buy/

1. Introduction

The Flush 1D Relay controls on/off function for one electrical device. The output contact is voltage free (dry contact), so different power supply loads can be connected to the Flush 1D Relay. It can be paired with a digital temperature sensor (sold separately). It supports push­button/momentary switches and toggle switches (default).
The connection of a digital temperature sensor means you can create complex scenes and control any device relative to a set temperature range. The Qubino Flush 1D Relay also acts as a Z-Wave repeater to improve the range and stability of the Z-Wave network.
EN.
Flush 1D Relay supported functions:
Turn
ON/OFF
Temperature Sensor
Scene 1 Trigger
Automatically turn
ON/OFF
Associations
Z-Wave Repeater
Auto-inclusion
✓ ✓
EN.
10

2. Use Cases

The Flush 1D Relay can be used in many different scenes, which can help make your life more comfortable. We have prepared a few of them for you so you can get an idea for your next smart home project. Of course, there are countless of other options for how to use Qubino Flush 1D Relay to remotely control devices via your smartphone.

2.1. Installation examples where Flush 1D Relay is installed behind a wall switch

Remotely control garage doors
Remotely control door locks
Remotely control gate motors
Remotely measure room temperature
(*The temperature sensor is sold separately - for more info, please see Qubino catalogue. Product ordering code (model number): ZMNHEA1)
EN.
11
Remotely control on/off gas water heaters
Remotely trigger different scenes with
additional input (I2) – for example scene 1: turn off all the lights in the house
EN.
12

2.2. Installation examples where Flush 1D Relay is installed in electrical box

Remotely switch heat pumps to PV working
mode (when electricity is available from photovoltaic). Running on photovoltaics, the heat pump will heat water to higher temperature
Remotely switch heat pumps to PV working
mode and measure temperature of water.
Remotely control garage doors and remotely
check the state of door sensor (if the door is open/closed)
Remotely control door locks and remotely
check the state of door sensor (if the door is open/closed)
EN.
13
Remotely control gate motors and remotely
check the state of door sensor (if the door is open/closed)
EN.
14

2.3. Additional features of Flush 1D Relay which can make your life easier

Want to control other devices in your Z-Wave
network with the Flush 1D Relay?
Connect the Flush 1D Relay with other devices
in your network to remotely and automatically trigger another Z-Wave device. And have other Z-Wave devices trigger your Qubino Flush 1D Relay.
EN.
15

3. Qubino Flush 1D Relay Advantages and Highlights

3.1. Advantages

The Qubino Flush 1D Relay allows the easiest and quickest installation possible.
Because of its small size, it fits smoothly in even the smallest, shallowest and most crowded flush mounting boxes, which are stuffed with lots of electrical cables and where every millimetre counts. All this is possible because the Qubino Flush 1D Relay is the smallest Z-Wave switch in the world.
The Qubino Flush 1D Relay has the option to connect a temperature sensor*, through
which users can monitor the ambient air or water temperature. It’s the only Z-Wave switch in the world which offers this option. With a connected sensor, the user can monitor accurate measurements of the room temperature, pool water temperature, etc., and remotely change conditions as desired. Qubino relay, along with the temperature sensor, is connected directly to the power supply. Install it and forget it – no need to worry about dying batteries, like with battery-powered sensors.
*The temperature sensor is sold separately - for more info, please see Qubino catalogue. Product ordering code (model number): ZMNHEA1
Please do not put the temperature sensor directly into the water! The temperature sensor is
designed to measure the water temperature by being mounted to the water pipe.
EN.
16
Qubino Flush 1D Relay is the only Z-Wave switch in the world, which has one additional
input (2), which enable triggering more scenes. The user does not need to buy additional devices for setting various scenes, such as:
o Switch connected to input 2: Welcome home – turn on the selected lights and
open the shades
o Input 2 also allows to connect a magnet door sensor which can be used to
indicate if a door is open/closed
Qubino guarantees 100% device quality. Such high quality can be delivered because
every Qubino goes through rigorous quality control standards throughout the production process. Every device has a unique serial number and a part number, which are assigned to the device only after it goes through a strict testing procedure.
EN.
17
By scanning the QR code on the back of your Qubino device, the serial and part numbers
will be automatically copied on your mobile phone; they also provide direct access to Qubino’s technical support team. The serial and part numbers of your device are given automatically every time you open an inquiry with our support team: this instantly shares the relevant device information we need to provide the best technical support possible. For details, please see the Device Information and Support chapter.
The Qubino Flush 1D Relay is engineered and manufactured in the EU, and contains
only the highest quality components.
+ 38 hidden pages