Rechargeable
Lithium Ion
Battery LED
Instructions
Operation:
Press Power button once to turn on.
•
Press Power button again to dim. Each
•
button press dims to the next lower level.
100% 75% 50% 25% 10% 0%
Double tap to turn off at any level.
•
Press and hold Power button to change
•
between 3000k and 5600k.
Battery Level is shown with the indicator
•
lights.
Indicator lights will go to sleep after 10
•
seconds.
Tap Power button once to wake and show
•
battery level.
To disable the Power Button when
•
traveling, using a pen, press and hold the
the KILL button button on the side for 5
seconds.
To enable the Power Button after it has
•
been killed, plug it into your charger.
To Reset the lamp to default settings of
•
5600k and 100%, press the RST button.
Charging:
The Q-Lion series V2.0 Lamp charges
•
from a QC3.0 USB Charger rated 9V
2amp or 12V 1.5amp. The power light will
flash if the charger is insufficient. (Lamp
will not charge on a standard 5V USB
charger.)
The lamp cannot operate while charging.
•
V2.1
www.QUASARSCIENCE.com
Loading...