Quasar VV1303A, VV1303B, VV2003A, Omnivision VV-1303A, Omnivision VV-1303B Operating Instructions Manual

Please read these instructions carefully before attempting to connect,
operate, or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)

Combination VCR

Operating Instructions

Models No.

VV-1303A/ VV-1303B

LSQT0739A

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Basic Operation

Initial Setup

TV Operation

Timer Operation

Advanced Operation

For Your Information

• Initial Setup and Connection Procedures are on pages 8 and 9.

As an ENERGY STAR® Partner,
Matsushita Electric Corporation of America has
determined that this product or product model meets
the

E

NERGY STAR® guidelines for energy efficiency.

VV-2003A

2

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Important Safeguards and Precautions

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from power source indicated on unit
or in this manual. If uncertain, have your Electric
Utility Service Company or Video Products Dealer
verify your home power source.

2 POWER CORD PLUG

For safety, this unit has a polarized type plug (one
wide blade), or a three-wire grounding type plug.
Always hold the plug firmly and make sure your
hands are dry when plugging in or unplugging the
AC power cord. Regularly remove dust, dirt, etc.
on the plug.

POLARIZED PLUG CAUTION:

The plug fits into outlet one way. If it cannot be fully
inserted, try reversing it. If it still will not fit, have an
electrician install the proper wall outlet. Do not
tamper with the plug.

GROUNDING PLUG CAUTION:

The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
outlet. Do not tamper with the plug.

3 POWER CORD

To avoid unit malfunction, and to protect against
electrical shock, fire or personal injury:

-Keep power cord away from heating appliances
and walking traffic. Do not rest heavy objects on,
or roll such objects over the power cord.

-Do not tamper with the cord in any way.

-An extension cord should have the same type
plug (polarized or grounding) and must be
securely connected.

-Overloaded wall outlets or extension cords is a
fire hazard.

-Frayed cords, damaged plugs, and damaged or
cracked wire insulation are hazardous and
should be replaced by a qualified electrician.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat
generated during operation. If blocked, heat
build-up may result in a fire hazard or heat
damage to cassettes.
For your protection:
a.Never cover ventilation slots while unit is ON,

or operate unit while placed on a bed, sofa,
rug, or other soft surface.

b.Avoid built-in installation, such as a book case

or rack, unless properly ventilated.

5

AVOID EXTREMELY HOT LOCA TIONS OR

SUDDEN TEMPERA TURE CHANGES

Do not place unit over or near a heater or
regulator, in direct sunlight, etc. If unit is suddenly
moved from a cold place to a warm place,
moisture may condense in unit and on the tape
causing damage.

6 TO AVOID PERSONAL INJURY

• Never place unit on support or

stand that is not firm, level,
and adequately strong.
The unit could fall causing
serious injury to a child or
adult and damage to the unit.

• Move any appliance and cart

combination with care. Quick
stops, excessive force, and uneven
surfaces may cause objects to overturn.

• Carefully follow all operating instructions.

USING THE UNIT

Before unit is brought out of storage or mo ved to a new location,
refer again to the INSTALLATION section of these safeguards.

1 KEEP UNIT WELL AWAY FROM WATER OR

MOISTURE, such as vases, sinks, tubs, etc.

2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG

IMPACT, unplug unit and have it inspected by a qualified

service technician before use.

3 ELECTRICAL STORMS

During a lightning storm, or before leaving unit unused for
extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.

4 WHEN UNIT IS PLUGGED IN

• DO NOT OPERATE IF:

- liquid has spilled into unit.

- unit was dropped or otherwise damaged.

- unit emits smoke, malodors, or noises.
Immediately unplug unit, and have it inspected by a service
technician to avoid potential fire and shock hazards.

• Never drop or push any object through openings in unit.
T ouching internal parts may cause electric shock or fire hazard.

• Keep magnetic objects, such as speakers, away from unit
to avoid electrical interference.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer to
avoid risk of fire, shock, or other hazards.

6 CLEANING UNIT

Unplug unit. Use a clean, dry, chemically untreated cloth to gently
remove dust or debris. DO NO T USE cleaning fluids, aerosols, or
forced air that could over-spr a y, or seep into unit and cause
electrical shock. An y substance, such as wax, adhesiv e tape, et c.
may mar the cabinet surface . Exposure to greasy, humid, or dusty
areas may adv ersely aff ect internal parts.

READ AND RETAIN ALL SAFETY AND
OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANU AL AND ON UNIT

SERVICE

1 DO NOT SERVICE PRODUCT YOURSELF

If, after carefully following detailed operating instructions, the
unit does not operate properly, do not attempt to open or
remove cov ers , or mak e an y adjustments not described in the
manual. Unplug unit and contact a qualified service technician.

2 REPLACEMENT OF PARTS

Make sure the service technician uses only parts specified
by the manufacturer, or have equal safety characteristics as
original parts. The use of unauthorized substitutes may
result in fire, electric shock, or other hazards.

3 SAFETY CHECK AFTER SERVICING

After unit is serviced or repaired, request that a through safety
check be done as described in the man ufacturer’s service
literature to insure video unit is in safe operating condition.

OUTDOOR ANTENNA INSTALLATION

1 SAFE ANTENNA AND CABLE CONNECTION

An outside antenna or cable system must be properly
grounded to provide some protection
against built up static charges
and voltage. Section 810 of
the National Electrical Code,
ANSI/NFPA 70 (in Canada,
part 1 of the Canadian
Electrical Code) provides
information regarding proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE

POWER LINES OR CIRCUITS

Locate an outside antenna system well away from power
lines and electric light or power circuits so it will never touch
these power sources should it ever fall. When installing
antenna, absolutely never touch power lines, circuits or
other power sources as this could be fatal.

GROUND
CLAMP

ELECTRIC
SERVICE
EQUIPMENT

ANTENNA LEAD
IN WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING
CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE
GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

NEC - NATIONAL

ELECTRICAL CODE

3

Safety Precautions/Mesures de sécurité

Warning : To prevent fire or shock hazard, do not e xpose this equipment to rain or moisture.

Caution : To pre vent electric shock, matc h wide blade of plug to wide slot , fully insert.
Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne

pas exposer cet appareil à la pluie ou à une humidité excessive.

Attention :Pour éviter les chocs électriques, introduire la lame la plus large de la fiche

dans la borne correspondante de la prise et pousser jusqu’au fond.

This video recorder, equipped with the HQ (High Quality) System, is compatible with
existing VHS equipment. Only use those tapes with the mark. It is recommended that
only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour
VCR machines be used. This television receiver provides display of television closed
captioning in accordance with §15.119 of the FCC rules.

FCC WARNING : Any unauthorized changes or modifications to this

equipment would void the user’s authority to operate.

This symbol warns the user that uninsulated v oltage within the unit ma y
have sufficient magnitude to cause electric shoc k . Therefore, it is
dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Congratulations

on your purchase of one of the most sophisticated
and reliable products on the market today. Used
properly, it will bring you and your family years of
enjoyment. Please fill in the information below.
The serial number is on the tag located on the
back of your unit.

Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.

Batteries
2 “AA”

Accessories

To order accessories,
call toll free 1-800-332-5368.

Remote Control
LSSQ0397

Loading the Batteries

Battery replacement caution

• Do not mix old and new batteries.

• Do not mix alkaline with manganese batteries.

Prevent Accidental Tape Erasure

Break off the tab to
prevent recording.

Record
Tab

Screwdriver

To record again.

Cover the hole
with cellophane tape.

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.
Disposal of these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance: <http://

www.eiae.org.>

4

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Specifications

Display

Picture Tube: 13 inch measured diagonal

90° deflection picture tube
(VV-1303A/VV-1303B)
20 inch measured diagonal
90° deflection picture tube
(VV-2003A)

VCR

Video Recording 2 rotary heads helical
System: scanning system
Audio Track: 1 track

Tuner

Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels: Midband A through I (14 ~ 22)

Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64)
Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A(01)
Ultraband 65 ~ 94, 100 ~ 125

General

Power Source: 120 V AC, 60 Hz
Power Consumption: Power On

Approx. 69 watts
Approx. 110 watts(VV-2003A)

Power Off

Approx. 2.5 watts
Television System: EIA Standard NTSC color
Speaker: 1 piece
Operating Temperature: 5 °C ~ 40 ° C ( 41 ° F ~ 104 °F)
Operating Humidity: 10 % ~ 75 %
Weight: 12 Kg (26.42 lbs.)

(VV-1303A/VV-1303B)

23 Kg (50.6 lbs.) (VV-2003A)
Dimensions: 386 (W) X 385 (H) X 374 (D) mm

15-3/16” (W) X 15-3/16” (H) X

14-3/4” (D)

(VV-1303A/VV-1303B)

515 (W) X 505 (H) X 474 (D) mm

20-5/16" (W) X 19-7/8" (H) X

18-11/16" (D)

(VV-2003A)

Note: Designs and specifications are subject to
change without notice.

V I DE

O

HEADS MAY

NEED C

LEAN I NG

PL

EASE

I

NSERT HEAD

C

LEAN I NG CASSETTE

OR

REFER TO MANUAL

END : PLAY K

EY

Head Cleaning

Record/Playback Time

Only use tapes with the mark in this unit.

SP (Standard Play)

2 Hours

40 Minutes

1 Hour

5 Hours

20 Minutes

2 Hours

LP (Long Play)

3 Hours 8 Hours

SLP (Super Long Play)

Type of Video Cassette

Tape Speed

Setting

T160

T60

Unit auto adjusts clock for DST (Daylight Saving
Time.)

■■

■■

■ Spring (First Sunday in April)

DST : ON => Sets clock ahead one hour.

■■

■■

■ Autumn (Last Sunday in October)

DST : ON => Turns clock back one hour.

• If your area does not observe Daylight Saving

Time, select DST:OFF .

• Keep these time changes in mind when

programming the unit for timer recordings.

DST (Daylight Saving Time)

2 Hour

4 Hours

6 Hours

T120

Digital Auto Tracking

Continuously analyzes the signal and adjusts for
optimum picture quality.

Manual Tracking Control (to reduce picture noise)

Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 number key on
the remote control or CH on the unit until the
picture clears up. To return to Auto Tracking, press
POWER off, then on again a few seconds later.

picture tube for better color reproduction and
picture contrast.

Unit Information

Features for a Quality Picture

Playing older or damaged tapes may eventually
cause video heads to become clogged.

Head Clog Sensor

During playback this screen
appears if clogging is
detected. To remove screen,
press PLAY on the remote
or unit.

• Use “dry” type head

cleaning cassette only.

(Part No. NV-TCL30PT is recommended.)

• Follow cleaning tape directions carefully.
Excessive use of head cleaning tape can
shorten the video head life.

4

(VV-1303A/VV-1303B)

5

Table of Contents

Important Safeguards and Precautions / Safety Precautions .. 2, 3

Before Using ....................................................................................... 4

Unit Information ................................................................................. 4

Table of Contents ............................................................................... 5

Location of Controls........................................................................... 6

Connections / Initial Setup (Ready to Play) .................................. 8,9

Reset Language, Channels, Clock, Time Zone Adjust ........... 10, 11

Playback a Tape ................................................................................ 12

Record On a Tape ............................................................................. 12

Copy Your Tapes (Dubbing) ............................................................ 13

Tape Operation ........................................................................... 22~24

Special VCR Features ............................................................... 25, 26

V-Chip Control Feature ............................................................. 27~29

On-Screen Display (OSD) ................................................................ 30

Before Requesting Service ...............................................................31

Limited Warranty ......................................................................... 32, 33

Customer Services Directory ...........................................................33

Spanish Quick Use Guide / Guía para rápida consulta .......... 34, 35

Index.................................................................................................. BC

TV Operation .................................................................................... 14

Picture Adjustment.......................................................................... 15

TV Timer Features ..................................................................... 16, 17

Closed Caption System............................................................. 18, 19

Timer Recording ........................................................................ 20, 21

Basic Operation

TV Operation

Timer Operation

Advanced Operation

For Your Information

Initial Setup

6

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Location of Controls

Remote Control Buttons

EJECT button:

When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the unit will not respond to the command.

NIGHT

Color and picture intensity level
are adjusted during night time use.

SLEEP

Turns off the unit autmatically.

TRACKING UP/DOWN

Reduces picture noise during
Playback and Slow Motion.

NUMBER keys

Selects a channel directly.

ADD/DELETE

Adds or deletes a channel.

SEARCH

Goes directly to the desired
recording. Locates end point
of recording.

CHANNEL UP/DOWN

Selects a channel.

SELECT UP/DOWN

Controls the navigation around
on-screen menu.

PROGRAM

Displays SET PROGRAM screen.
You can set Timer Program and
On-Timer.

FAST FORWARD/SEARCH

Fast forwards tape, and
searches forward scene.

CM/ZERO

In Stop mode, goes to the
counter “0:00:00.” In Play mode,
skips over 1 to 3 minutes of tape.

SPEED

Selects recording speed.

PLAY

Begins playback.

PAUSE/SLOW

Pauses and slow motion
and frame advance picture.

POWER

Turns on or off the unit.

DISPLAY

Displays the VCR
status and clock.

TAPE POSITION

Finds out present tape
position and amount of
tape remaining.

COUNTER RESET

Resets to “0:00:00” at
the desired position.

RAPID TUNE

Displays the last channel
you were watching.

MUTE

Mutes the sound instantly.

ACTION

Displays main menu.

STOP

Stops recording or playback.

REC

Records the program.

REWIND/SEARCH

Rewinds tape, and searches
reverse scene.

EJECT

Ejects tape.

VOLUME UP/DOWN

Adjusts volume.

SET/BACK SPACE

Sets a selected menu,
or goes back to correct.

6

Initial Setup

7

VIDEO IN AUDIO IN

POWER VOLCHSTOP/EJECT REW/

PLAY/REPEAT

FF/

REC

TIMER

A

C

T

IO

N

REC

ON TIMER

PROG TIMER

VHF/UHF

Built-In Speaker

AUDIO VIDEO IN Jack

For dubbing.

POWER

See previous page.

VOLUME UP/DOWN
SET/BACK SPACE

See previous page.

CHANNEL UP/DOWN
TRACKING UP/DOWN
SELECT UP/DOWN

See previous page.

STOP/EJECT

See previous page.

ACTION

Press together with REW.

REWIND/SEARCH

See previous page.

ACTION

Press together with STOP.

PLAY

See previous page.

REPEAT

Repeats a recording.

FAST FORWARD/
SEARCH

See previous page.

REC

See previous page.

PHONES Jack

Connect an
earphone or
headphones.

PROG TIMER
Indicator

Lights when the
unit is set for
Timer Recording.

ON TIMER
Indicator

Lights when the
On-Timer is set.

REC Indicator

Lights during
recording.

Remote SensorTIMER

Sets a timer alarm up 60 min.

Rear View of the Unit

AC Power Plug

When plugged into
an AC outlet, the
unit consumes 2.5 W
of electric power in
OFF condition.

VHF/UHF Antenna

Input Terminal

In from your Antenna or Cable.

Page 8

Easy Grip-Handle

Use when transporting the unit.

Front View of the unit and Indicators on the Front Panel

<Model VV-2003A unit shown>

<Model VV-1303A/VV-1303B unit shown>

7

8

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Connections/ Initial Setup (Ready to Play)

How to Connect

Initial Setup (Plug&Play)

For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.

For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.

Please make all cable or antenna connections before plugging

into the AC outlet. Plugging the unit power cord into an AC outlet

starts auto channel and clock set.

VH

F/

U

H

F

IN from
ANT./CABLE

VHF/UHF

V

H

F

/
U

H

F

Cable TV
Converter Box

Connecting

IN from
ANT./CABLE

VHF/UHF

VHF/UHF

2 / 6 / 2002

WED 12 : 00PM

DST : O

N

A

UTO CLOCK SET

COMPLETED

SETT I NG : CH 1

0

If AUTO CLOCK SET IS
INCOMPLETE screen
appears, set the clock using
MANUAL CLOCK SET
procedure on next page.

Initial Setup (Ready to Play)

1

Plug the unit power cord into an
AC wall outlet.

Press POWER on the remote or
unit. The unit comes on and auto
channel and clock set starts.

• If you use a cable box, turn it on and set it to the
Public Broadcasting Service (PBS) channel in
your time zone. If you use a DSS reciever, it
must be turned off.

Settings are made
automatically. When setup is
done, this screen appears.

CH AUTO SET PROCEEDING

PROCEEDING

AUTO CLOCK SET

CANCEL : PRESS STOP KEY

3

2

WARNING:

Overtightening “Nut type” RF coaxial cables
may damage jacks. Finger tighten only.

PLEASE SET CLOCK BY
P

R

ESS I NG ACT I ON KEY

A

UTO CLOCK SET

I S I NCO

MPL

ETE

UNIT

Initial Setup

9

VIDEO IN AUDIO IN

POWER VOLCHSTOP/EJECT REW/

PLAY/REPEAT

FF/

REC

TIMER

A

CT

I

O

N

REC

ON TIMER

PROG TIMER

Reset all unit Memory Functions

When moving unit to a new location, or if a
mistake w as made in the Initial Setup section.

• Make sure a tape is not inserted in the unit.

Manual Clock Set

If AUTO CLOCK SET was incomplete, manually
set the clock as follows.

SET :

SELECT :
END

:

ACT I ON

SET

CLOC

K

DST

: ON

SESELE CT

MON

TH

TH

1 / /

:

1

2

Press ACTION on the remote to
display SET CLOCK Menu screen.

Press

to select the month
and press to set. In the same
manner, select and set the date,
year, time, and DST. (Daylight
Saving Time)

3

Press ACTION twice to start
CLOCK and exit.

3

1
2

Do “Initial Setup” on page 8.

<Model VV-2003A unit shown>

POWER

ACTION

SELECT/SET

:CH UP

:CH DOWN
:VOL UP
:VOL DOWN

Note to CABLE System Installer

This reminder is provided to call the
CABLE (Cable TV) System Installers
attention to Article 820-40 of the NEC
that provides guidelines for proper
grounding and, in particular, specifies
that the cable ground shall be
connected to the grounding system of
the building, as close to the point of
cable entry as practical.

SET :
START :

ACT I ON

SET CLOCK

DST : O

N

4 / 5/

:

2003

SAT

12

00

PM

SET

COMPLETED

Turn the unit
Power on.

Press and hold both PLAY and
FF on the unit for more than 5
seconds.

• The power will shut off.

• Please ignore “NO CASSETTE” warning.

10

and
press to select
and set the month,
date, year, time,
and DST (Daylight
Saving Time).

5) Press ACTION
twice to start the
clock and exit this
mode.

3) Press to select
“ANTENNA,” then
press to set your
antenna system
(“TV” or “CABLE”).

4) Press to select
“AUTO SET,” then
press .

• After Channel Auto Set is

finished, Clock Auto Set
will be performed. (If clock is
set manually, Clock Auto
Set will not be performed.)

(“TIME ZONE ADJUST”

appears only when auto
clock is set.)

M A I N MENU

T V

VCR

LANGUAGE

SET : ACT I ON

SELECT :

T V

EX I T

CLOC

K

C H

T V

VCR

IDIOMA

T V

MENU

PR I NC I PAL

CANAL

REL OJ SAL I R

H

O L A

F I JAR :

ACT I O

N

ELEG I R :

BONJOUR

LAN

GU

E

MEN

U

T

ELE

MAGNET .

SORT I E

HORLOGECANAL

REGLER : ACT I O

N

SEL. :

1) Press to
select language
icon.

2) Press ACTION
repeatedly.

For English

M A I N MENU

T V

VCR

H

ELL

O

LANGUAGE

SET : ACT I ON

SELECT :

T V

EX I T

CLOC

K

C H

For Spanish

For French

Language

M A I N MENU

T V

VCR

EX I T

CLOC

K

C H

LANGUAGE

SET : ACT I ON

SELECT :

Channels

Clock

Press ACTION

to display MAIN MENU.

3) Press to
select “EXIT.”
Press ACTION to
exit.

1) Press to
select “CH.”

M A I N MENU

CLOC

K

C H

SET : ACT I ON

SELECT :

VCR

T V

EX I T

LANGUAGE

ANT

ENNA

: CABLE

A

UTO SE

T

CHA

NNEL

CAPT I

ON

W

EAK S I GNAL D I

SPLAY : OFF

SELECT :
SET

:

END

: ACT I ON

SET UP CHA

NNE

L

2) Press ACTION.

M A I N MENU

VCR

CLOC

K

C H

SET : ACT I ON

SELECT :

T V

EX I T

C H

LANGUAGE

1) Press to
select “CLOCK.”

AUTO CLOCK SET

MANU

AL

T I M

E ZONE AD

JUS

T :

0

SELECT :
SET

:

END

: ACT I ON

SET CLOCK

2) Press ACTION.

1

2

3)Press to select

“MANUAL” or
“AUTO CLOCK

SET” and press .

• For Auto Clock Set,
select “AUTO CLOCK
SET,” then press .

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Reset Language, Channels, Clock,

4) Press

SET :
START

:

ACT I ON

SET

CLOC

K

DST : O

N

4 / 5/

4 / 5/

:

:

2003

2003

SAT

SAT

12

12

0000PM

PM

SESELE CT

HOUR

HOUR

SELECT

:

11

Basic Operation

Time Zone Adjust

3) Press to
select TIME ZONE
ADJUST and
press or to
subtract or add
hour(s) as
necessary.

4)Press ACTION
twice to exit.

(Only when Auto Clock is set.)

Add or Delete a Channel

Time Zone Adjust

1) Press to
select “CLOCK.”

M A I N MENU

VCR

CLOC

K

C H

SET : ACT I ON

SELECT :

T V

EX I T

C H

LANGUAGE

2) Press ACTION.

AUTO CLOCK SET
MANU

AL

T I M

E ZONE AD

JUS

T :

0

SELECT :
SET

:

END

: ACT I ON

SET CLOCK

AUTO CLOCK SET
MANU

AL

T I M

E ZONE AD

JUS

T :

+1

SELECT :
SET

:

END

: ACT I ON

SET CLOCK

C

HANNEL

08 ADDED

To add channel:

Select channel with
number keys and
press ADD/DLT.

C

HANNEL

08 DELE T

ED

To delete channel:

Select channel with
CH

or number keys

and press ADD/DLT.

ACTION key on

the unit

Using keys

: CH UP

: CH DO WN
: VOLUME UP
: VOLUME DO WN

Whenever the menu or
program screen is displayed,
CHANNEL UP/DOWN function
as

and VOLUME UP/

DOWN function as

only.

On Remote

On Unit

On Unit

You can operate the
menu screen using
unit buttons. To display
the menu, press STOP/
EJECT and REW
together with no tape
inserted. T o exit the
menu, repeat above
with or without tape
inserted until normal
screen appears.

POWER

ACTION

ADD/DLT

NUMBER Keys

SELECT/SET

:CH UP

:CH DOWN
:VOL UP
:VOL DOWN

VOL

CH

STOP/EJECT REW/

ACTION

• “TIME ZONE ADJUST”
is set manually.

returns to “0” if clock