USER MANUAL
MX-GEA
MX-GEA
ABLE OF CONTENTS
T
PART 1 SAFETY WARNING...........................................................1.
1.2--DIMENSIONS..............................................................................2.
1.3--PRODUCT FEATURES................................................................2.
PART 2 INSTALLATION................................................................3.
2.1--MOUNTING...................................................................................3.
2.3--FUSE REPLACEMENT..................................................................4.
2.2--SETTING UP.................................................................................4.
PART 4 USING DMX512 CONTROLLER..........................................9.
4.1--BASIC ADDRESSING .................................................................. 9.
PART 3 DISPLAY PANEL OPERATION............................................5.
3.1-- ..........................................................................................5.BASIC
3.3--INTRO..........................................................................................6.
3.2-- ..........................................................................................5.MENU
3.4--INVERT.........................................................................................7.
3.7--EDIT.............................................................................................8.
1.4 SAFETY WARNING-- ......................................................................1.
3.8--EXTRA.........................................................................................9.
PART 5 APPENDIX.........................................................................13 .
5.1--MAINTENANCE........................................................................13.
4.2--CHANNEL ASSIGNMENT............................................................. 9.
3.5--RANGE.........................................................................................7.
3.6--SPECIAL.......................................................................................8.
.13.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
19
20
21
22
23
18
17
Lenses
Head cover
5 APPENDIX
5.1 MAINTENANCE
Motor
Color wheel
Head front cover
Connection board
Power supply
Base
Fan
No
ITEM
No
ITEM
No
ITEM
1
2
3
5
6
9
8
12
11
10
7
4
13
16
14
15
17
18
24
22
21
20
19
24
Hanging bracket
Rotation gobo wheel
LED PCB
Rotation wheel supports
Prism
Lenses supports
Head structure
23
Plastic arm
Y axes drive team
Arm base cover
Arm cover
Display PCB
Base cover
Handle
X axes drive team
3.9--DEFAULT......................................................................................9.
.1.
1.1 SAFETY WARNING
IMPORTANT：
●
●
●
●
●
●
●
●
●
●
This product must be installed by a qualified professional.
Always operate the equipment as described in the user manual.
A minimum distance of 0.5m must be maintained between the equipment
and combustible surface.
The product must always be placed in a well ventilated area.
Always make sure that the equipment is installed securely.
DO NOT stand close to the equipment and stare directly into the LED light
source.
Always disconnect the power supply before attempting and maintenance.
Always make sure that the supporting structure is solid and can support
the combined weight of the products.
The earth wire must always be connected to the ground.
Do not touch the power cables if your hands are wet.
●
●
●
●
●
●
●
●
●
This product left the place of manufacture in perfect condition. In order to
maintain this condition and for safe operation, the user must always follow
the instructions and safety warnings described in this user manual.
Avoid shaking or strong impacts to any part of the equipment.
Make sure that all parts of the equipment are kept clean and free of dust.
Always make sure that the power connections are connected correct and
secure.
If there is any malfunction of the equipment, contact your distributor
immediately.
I t is important that the power cable is frequently inspected to ensure that
there is no damagein any position. If the power cable is damaged in any way,
it should be replaced by a qualified electrical technician.
When transferring the product, it is advisable to use the original packaging
in which the product left the factory.
Shields, lenses or ultraviolet screens shall be changed if they have
become damaged to such an extent that their effectiveness is impaired.
The lamp (LED) shall be changed if it has become damaged or thermally
deformed.
CHANNEL
FUNCTIO N
VALUE
1 SAFETY WARNING
6
0
60
61
150
151 165
166 2 55
36 0o index ing
GOBO WHEEL 2 R OTATION
No fun ction
Cloc kwis e rotat e from s low to f ast
Anti -cloc kwis e rotat e from s low to f ast
8
9
IRIS
0
199
200
209
210
219
220
229
230
239
240
255
Line ar Iris
Iris e ffct: f ast cl ose & sl ow open (slow t o fast)
Iris e ffct: clos e & ope n (slo w to fast)slow slow
Iris e ffct: f ast cl ose & pen (s low to f ast)fast o
Iris e ffct: clos e & open ( slow t o fast)slow fast
Iris e ffct: R ando m (slow to fast )
0
31
32
63
64
95
96
127
128 1 59
160 191
192
223
255
12
11
0
255
DIMM ER
Dark
Brigh t
STRO BE
Clos e
Open
Stro be: Sl ow > Fas t
Ruls e stro be effe ct: Sl ow > Fas t
Rand om str obe eff ect: S low > Fa st
Open
Open
Open
10
0
255
FOCUS
NearFar
PRIS M ROTATIO N
NO
Clock wise ro tate fro m slow to fa st
NO
Anti -clock wise ro tate fro m slow to fa st
0
9
10
119
120
129
130
255
PRIS M
7
NO
0
9
Prism
10
39
40
49
50
59
60
69
70
79
80
89
90
99
100
109
110
119
120
129
130
140
150
170
180
190
200
210
220
230
240
139
149
159
179
189
199
209
219
229
239
255
Effec t1（patt ern or pri sm）
Effec t2（ ）patt ern or pri sm
Effec t3（ ）patt ern or pri sm
Effec t4（ ）patt ern or pri sm
Effec t5（ ）patt ern or pri sm
Effec t6（ ）patt ern or pri sm
Effec t7（ ）patte rn or pris m
Effec t8（ ）patt ern or pri sm
Effec t9（ ）patt ern or pri sm
Effec t10
Effec t11
Effec t12
Effec t13
Effec t14
Effec t15
Effec t16
Effec t17
Effec t18
Effec t19
Effec t20
224
0
19
20 39
40
59
60
139
140
149
150 159
Pan/tilt bl ack act ivate d (activate d after 3 secs)
Pan/tilt bl ack deactivated (activa ted aft er 3 secs )
No func tion
Auto1(act ivate d after 3 s ecs)
Auto2(act ivate d after 3 s ecs)
CONT ROL
Dim setting s according to displ ay pres et(ac tivat ed after 3 secs)
.12.
13
160 169
170 179
180 189
190 199
Test(activated after 3 secs )
Cust om(ac tivated after 3 secs)
Soun d 1(act ivate d after 3 s ecs)
Soun d 2(act ivate d after 3 s ecs)
200 219
220 235
Reset (act ivate d after 3 secs)
No function
236
239
240
243
244 2 47
248
251
252
255
DIM0 (acti vated a fter 3 se cs)
DIM1 (acti vated a fter 3 se cs)
DIM2 (acti vated a fter 3 se cs)
DIM3 (acti vated a fter 3 secs)
DIM4 (acti vated a fter 3 se cs)
160
169
PRIS M
.2.
1.3 PRODUCT FEATURES
No
1
2
3
4
5
6
ITEM
Head
Side arm
Menu
Enter
Down
No
ITEM
No
7
8
9
10
11
ITEM
Up
Switch
Power input
DMX 3-PIN signal input
DMX 3-PIN signal output
Fuse holder
1
2
3 4 5 6
13
11
8 9
7
12
DMX 5-PIN signal input
13
DMX 5-PIN signal output
1.2 DIMENSIONS
BASIC
0 255
0 255
1
2
PAN
0~54 0°
TILT
0~270°
CHANNEL
FUNCTION
VALUE
0
10
11 20
21 30
31
40
41
50
51
60
61
70
71
80
NO GOBO
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
FIXE D GOBO WHEEL
GOBO 7
4
COLOR WHEEL
10
19
20
29
30 39
40
49
50 59
60 6 9
70 79
80 99
3
NO0
9
100 119
Red
120
139
159
160 17 9
180
199
140
200
219
Green
Yellow
Blue
Orange
Magenta
Light Blue
Light Blue
Magenta
Magenta
Orange
Orange
Blue
Blue
Yellow
Yellow
Green
Green
Red
10
12
0
31
32
63
64
95
96
127
128
159
160 191
192
223
224
255
16
STROB E
Clos e
Open
Strobe: Slow > F ast
Rulse strobe effect: Slow > Fas t
Random strob e effect: Slow > Fa st
Open
Open
Open
17
CHANNEL
FUNCTION
VALUE
0
19
20 39
40
59
60
139
140
149
150 159
160 169
170 179
180 189
190 199
Dim setting s accor ding to displa y pres et(ac tivat ed after 3 secs)
Pan/tilt bl ack act ivate d (activated after 3 secs)
Pan/tilt bl ack dea ctivated (ac tiva ted aft er 3 secs )
No function
Auto1(act ivated after 3 secs)
Auto2(act ivated after 3 secs)
Test(activa ted aft er 3 secs )
Cust om(ac tivat ed after 3 secs)
Sound 1(act ivate d after 3 s ecs)
Sound 2(act ivate d after 3 s ecs)
CONTR OL
200 219
220 235
Rese t(act ivated after 3 secs)
No func tion
236
239
240
243
244 2 47
248
251
252
255
DIM0 (acti vated a fter 3 se cs)
DIM1 (acti vated a fter 3 se cs)
DIM2 (acti vated a fter 3 secs)
DIM3 (acti vated a fter 3 se cs)
DIM4 (acti vated a fter 3 secs)
81
95
96 110
111
125
126
140
141
155
156
170
171
185
186 255
Shak ing go bo 6
Shak ing go bo 5
Shak ing go bo 4
Flow effec t
Shak ing go bo 3
Shak ing go bo 2
Shak ing go bo 1
Shak ing go bo 7
0
10
11
20
21
30
31
40
41
50
51 60
61
70
71
85
86
100
131
145
146
160
161
255
5
NO GOB O
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
Shak ing go bo 6
Shak ing go bo 5
Shak ing go bo 4
GOBO W HEEL 2
Flow e ffec t
Shak ing go bo 3
Shak ing go bo 2
Shak ing go bo 1
101
115
116
130
220
255
Rainbow or linear effect
White
Red
15
0
255
DIMM ER
Dark
Brig ht
13
0
255
FOCU S
FOCU S FINE
0
255
NearFar
NearFar
14
.3.
2.1
UPR IGH T
MOUNTING：
●●The LED fixture can be operated in any position at any angle. When mounted
on a flat surface, the surface must be strong enough to support 10 times the
weight of the fixture and stable so that there will be no damage caused to the
fixture or surrounding people or objects because of movements of the fixture
on the surface.
When the unit is mounted in a hanging position, the fixture is attached using the
mounting brackets and a standard truss clamp or other clamping device. The
mounting brackets supplied are mounted using quick-release locks allowing
simple mounting or removal.
2 INSTALLATION
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
HAN GING
CLAMP
SAFTY CABLE
BRACKET
9
0
60
61
150
151
165
166
255
360o indexi ng
GOBO WH EEL 2 ROTATI ON
No fun ction
Cloc kwise ro tate fr om slow to f ast
Anti- clock wise ro tate fr om slow to f ast
0
10
11
20
21
30
31
40
41
50
51 60
61
70
71
85
86
100
131
145
146
160
161
255
8
NO GOBO
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
Shaki ng gobo 6
Shak ing gobo 5
Shak ing gob o 4
GOBO WH EEL1
Flow ef fect
Shaki ng gobo 3
Shak ing gobo 2
Shaki ng gobo 1
101
115
116
130
IRIS
CHANNEL
FUNCTIO N
VALUE
PRISM
10
NO
0
9
Prism
10
39
40
49
50
59
60
69
70
79
80
89
90 99
100
109
110
119
120
129
130
140
150
170
180
190
200
210
220
230
240
139
149
159
179
189
199
209
219
229
239
255
Effec t1（patt ern or pri sm）
Effec t2（ ）patt ern or pri sm
Effec t3（ ）patt ern or pri sm
Effec t4（ ）patt ern or pri sm
Effec t5（ ）patt ern or pri sm
Effec t6（ ）patt ern or pri sm
Effec t7（ ）patte rn or pris m
Effec t8（ ）patt ern or pri sm
Effec t9（ ）patt ern or pri sm
Effec t10
Effec t11
Effec t12
Effec t13
Effec t14
Effec t15
Effec t16
Effec t17
Effec t18
Effec t19
Effec t20
PRIS M ROTATIO N
11
NO
Clock wise ro tate fro m slow to fa st
NO
Anti -clock wise ro tate fro m slow to fa st
0
9
10
119
120
129
130
255
0
10
11
20
21
30
31
40
41
50
51 60
61
70
71
80
81
95
126
140
141
155
156
170
171
185
186
255
7
NO GOBO
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
Shaki ng gobo 6
Shak ing gobo 5
Shak ing gobo 4
GOBO WH EEL1
Flow ef fect
Shaki ng gobo 3
Shak ing gobo 2
Shaki ng gobo 1
96
110
111
125
GOBO 7
Shaki ng gobo 7
12
0
199
200
209
210
219
220
229
230
239
240
255
Line ar Iris
Iris e ffct: f ast clo se & slow o pen (sl ow to fas t)
Iris ef fct: close & open (sl ow to fas t)slow slow
Iris ef fct: fa st clos e & pen (slo w to fast )fast o
Iris e ffct: clos e & open (s low to fa st)slow fast
Iris ef fct: Ra ndom (s low to fa st)
.10.
160
169
PRIS M
.4.
.9.
2.3 FUSE REPLACEMENT
The LED fixture can be used as a stand alone unit. The stand alone
functions AUTO 1, AUTO 2, SOUND 1, SOUND2 and CUSTOM can be
activated without the need to connect to any controller or connecting to
any other equipment.
Simply, access the <operation> menu from the DISPLAY and select the
target program to activate.
2.2 SETTING UP (STAND ALONE)
SAF TY CAP
FU SE
●
●
●
●
F
I
I
Remove the safety cap by a screwdriver.
etch the old fuse from safety cap.
nstall a new fuse.
nstall the safety cap.
3.9 DEFAULT
Defa ult
Defa ult
No
Yes
MENU
【 】
●
Default
This functions will reset all setting to the original factory setting
3.8 Extra
MENU
Password
Extra
****
●
●
【 】
●
Connect all of the units in series using standard DMX512 signal cable .
Set the DMX512 address in the menu.
It is possible to have the same DMX address or independent addresses for each
fixture.
DMX
4.2 CHANNEL ASSIGNMENT
4.1 BASIC ADDRESSING
●
【 】 【 】
Note: This product have two DMX512 channel configuration:
and ADVANCED BASIC .
4 USING A DMX512 CONTROLLER
1
2
3
4
5
0 255
0 255
0 255
0 255
0 255
PAN
TILT FIN E
PAN/TI LT SPEED
0~540 °
PAN FINE
Fine c ontrol o f pan mov ement
TILT
0~270°
Fine co ntrol o f tilt mov ement
From fa st to slo w
CHANNEL
FUNCTION
VALUE
ADVANCED
COLOR W HEEL
10 19
20
29
30 39
40
49
50 59
60
69
70
79
80
99
6
NO0
9
100
119
Red
120
139
159
160 179
180
199
140
200
219
Green
Yellow
Blue
Orange
Magenta
Light Blue
Light Blue
Magenta
Magenta
Orange
Orange
Blue
Blue
Yellow
Yellow
Green
Green
Red
220
255
Rainbow or linear effect
White
Red
. 5 .
.8.
DOWN
ENTER
UPMENU
3.1 BASIC
【 】 MENU
ENTER
Scroll through the main menu or exit from the current sub-menu
【 】
【 】
【 】
Enter the currently selected menu or confirm the current function
value
Scroll 'DOWN' through the menu list or decrease the value of the
current function
Scroll 'UP' through the menu list or increase the value of the
Current function
DOWN
UP
3 DISPLAY PANEL OPERATION
MENU
Rese t
Intro Ad dress
No
Yes
(001~512 )
3.2 MENU
Use
Dimm er
Tilt
Invert Pan Norm al
Reve rse
Norm al
Reve rse
No
Yes
Info
Edit ion
Norm al
Reve rse
Person
Disp lay
Keyl ock
60 clo se
Brig ht
No
Basi c
Advanced
Run
Auto 1
Auto 2
Cust om
DMX512
Soun d1
Slav e
Test
Soun d2
Yes
Dimm er
Dimm er4
Dimm er3
Dimm er2
Dimm er1
Dimm er0
3.6 SPECIAL
Enter to choose without delay or 3seconds delay
Enter to choose DMX control reset or DMX
cannot control reset
【 】
● 【 】 【 】 【 】
【 】
● 【 】 【 】 【 】
Black
Blackd No Yes
Reset
Reset DMX System
MENU
Spec ial
Rese t
No
Yes
Black d
DMX
Syst em
DMXe rror
ON
OFF
Fanw ait
Save
Blac k
3.7 EDIT
MENU
Edit
Step
Pan
Spee d
Tilt
Colo r
Gobo 1
Gobo 2
rot
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
Time
Yes
Strobe
Use
No
Dimme r
(000~25 5)
Prism
(000~25 5)
Gobo 2
(000~25 5)
Prism t
(000~25 5)
Iris
(000~25 5)
Focu s
(000~25 5)
●【 】 hoose to force the fan to stop during fixture blackout. ON Fanwait C 【 】
●【 】Dmxerror Savehoose in order to save the last DMX data in case of DMX signal C 【 】
error .Choose in order to blackout in case of DMX signal error.
Black【 】
● 【 】 【 】
【 】
【 】 【 】
【 】 【 】
【 】 【 】
Use Yes
ime
ime Use
ime Use
ime Use
Enter and select to run the steps user need.
if user want to circulate the created steps, please set the last step's
as 0
For example, there are 3 steps, the setting should be like belowed:
Step 1 = 4 = Yes
Step 2 = 5 = Yes
Step 3 = 0 = Yes
Note:
T
T
T
T
【 】
● 【 】
【 】 【 】 【 】 【 】 【 】 【 】 【 】
【 】 【 】 【 】 【 】 【 】 【 】 【 】
【 】 【 】
Edit
Edit
Step Pan Tilt Color Gobo 1 Gobo 2
Gobo2rot Prism , Prismt , Iris , Focus , Dimmer Strobe
Time Use .
Enter the mode to edit the custom programs by adjusting the
value of , , , Speed , , ,
, , ,
.6.
.7.
P/sta rt
P/Fin ish
T/st art
T/Fi nish
Use
Rang e
(000~255)
No
Yes
(000~255)
(000~255)
(000~255)
Spec ial
Rese t
No
Yes
Black d
DMX
Syste m
Edit
Step
Pan
Spee d
Tilt
Colo r
Gobo 1
Gobo 2
rot
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
(000~25 5)
Default
Default
No
Yes
(000~25 5)
(000~25 5)
Time
Yes
Strobe
Use
No
Dimme r
(000~25 5)
Pris m
(000~25 5)
DMXer ror
ON
OFF
Fanw ait
Save
Black
Gobo 2
(000~25 5)
Pris mt
(000~25 5)
Iris
(000~25 5)
Focu s
(000~25 5)
Password
Extra
****
MENU
3.3 INTRO
Rese t
Intro Ad dress
No
Yes
(001~512 )
Person
Disp lay
Keyl ock
60 clo se
Brig ht
No
Basi c
Advanced
Run
Auto 1
Auto 2
Cust om
DMX512
Soun d1
Slav e
Test
Soun d2
Dimm er
Edit ion
Yes
Dimm er4
Edit ionDimm er3
Edit ionDimm er2
Edit ionDimm er1
Edit ionDimm er0
Edit ionEdit ion
Info
● 【 】 【 】Address AddressEnter to set the DMX Address, which is from (001-512)
● 【 】 【 】Reset ResetIn order to rest custom modest to default, select
● 【 】 【 】 【 】 【 】Run Run DMAX512 Auto1Enter to select the operation mode: ; ;
; ; ; ; ;Sound 1 Sound 2 Slave Test【 】 【 】 【 】 【 】 【 】 【 】Auto2 Custom
● 【 】 【 】 【 】Person BasicEnter to select the DMX channel modes: ;Person
【 】Advanced .
● 【 】 【 】Display DisplayEnter to select the lighting time of the LCD display panel.
● 【 】 【 】 Enter the mode to select whether the access password
is on
Keylock Keylock
or off.
When the fixture is set as PASS , after 30 seconds or turn on the【 】ON
fixture next time, the fixture will need an access password to enter the
display menu control.
Note: UP DOWN UP The factory access password is + +【 】 【 】 【 】
DOWN ENTER+ , then press to confirm the access.【 】 【 】
● 【 】 【 】Info InfoEnter to see the version of the software.
● Dimmer Enter to select dimmer mode and dimmer speed. When 【 】Dimmer【 】
DIMMER is set to , then RGBW and MASTER DIMMER are linear. 【 】Off
The Dim 1/2/3/4 are speed modes of the non linear dimmer , is 【 】Dim1
the faster, while is the slowest. Dim4】
The factory default setting is 【 】Dim4 .
MENU
3.4 Invert
【 】
● 【 】 【 】 【 】 【 】 【 】
● 【 】 【 】
Normal Reverse
Use Yes
Invert
Pan Tilt / DimmerSelect / to set or
Enter and set to run the new setting
Use
Dimm er
Tilt
Invert Pan Norm al
Reve rse
Norm al
Reve rse
No
Yes
Norm al
Reve rse
MENU
3.5
RANGE
【 】
● 【 】
【 】
● 【 】
【 】
● 【 】
【 】
● 【 】
【 】
● 【 】 【 】
P/start
P/Finish
T/start
T/Finish
Use
Use Yes
Set pan start value
Set pan finish value
Set Tilt start value
Set Tilt finish value
Enter and select to open the operation of X/Y angle
000~255
000~255
000~255
000~255
P/sta rt
P/Fin ish
T/st art
T/Fi nish
Use
Rang e
(000~255)
No
Yes
(000~255)
(000~255)
(000~255)
Loading...