Mobile Network
TM-980
SOS FUNCTION 200 friend members
GSM/UMTS Network GPS Function optional
Update software off-line
USER’S MANUAL
As a result of technical improvements,the functions are
subject to change without notice!
Radio
Quick Call
Basic Operation
Please check the following two items before using.
a.Please make sure the SIM card has been activated and
N
has started the data service.
O
b.Please make sure the radio has been programmed with
T
the activated platform account and the correct APN
E
information. If not, please contact local dealer for
assistance.
1.Power on
a.Turn the volume switch clockwise to power on.
b.Radio beeps, voice prompting: Welcome to use the
digital public network radio.
c.Searching network then slow flashing green light.
d.Landing then fast flashing green light.
e.No light means it finished booting. Communication and
other operations are available now.
2.Power off
Turn the volume switch anticlockwise to power off.
3.Transmitting
Press the PTT button and the red light flashes, it enters
transmitting mode and the others will hear you. Keep pressing
the PTT button until transmitting finished.
4.Receiving
When the green light turns on means receiving.
01
Advanced Operation
1. Group switching
Turn the variable knob to choose the group you want to
use. (It will voice prompt group name every time when you
turn the knob.) Press the PTT button into the group chose.
2. Selective call
Friends selective call: Short press PF1 key to enter the
friends selective call mode, turn the variable knob to choose
the one you want to call.
Members selective call: Long press PF1 key to enter the members selective call mode, turn the variable knob to choose
the one you want to call alone in the group.
3. SOS
Long press PF2 key for emergency call. The transceiver will
send the alarm signal and the user name to the dispatcher &
the other members in your group. Dispatcher can also receive
the location information.
4.Checking battery level
Short press PF2 key to check the current battery level.
02 03
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
This equipment should be installed and operated with minimum
distance 20cm between the radiator& your body.
Purchasing Information
User Name:
User Contact Number:
User Contact Address:
Purchase Dates:
Agent Name:
Agent Contact Address:
Agent Contact Number:
Warranty Information
Period Service
Main Unit
Main Unit
Battery/
Charger
1 Year
6 Month
1) Free maintenance and replacement if not
cause by human,nature disasters,mishanding,
operation un-permitted or using nonstandard
battery packs.
2)Free techincal service to help find out the
problem and guidance to fix
3)Life-long operation guidance and techincal
support,including software upgrading
Within 6 Month: send you brand new one with
next order if it is not manually damaged
Beyond 6 Month: supply cost-effective
renovation
04
Loading...