Quantum QTM10 User Manual

Download

Page 1

QTM10

User manual

Manufactured and distributed by:

Quantum s.p.a

Via Piero e Alberto Pirelli, 6 - 20126 MILANO

www.qtm.it - info@qtm.it

Page 2

Index

Warning pag. 3 Precautions and safety pag. 4 Remote control pag. 5 Front Panel pag. 6 Rear Panel pag. 7 First Use pag. 8 Daily Use pag. 10 Menu pag. 12

Settings pag. 13 Tv List pag. 15 Diagnostics pag. 16

Audio/Video Switching pag. 17 Installation pag. 19 Installation and Connections pag. 20 Technical features pag. 24 Warning pag. 25 Warranty pag. 26

EQUIPMENT

Each box contains:

 RECEIVER ‚ REMOTE CONTROL ƒ REMOTE INFRARED SENSOR „ POWER CAR CABLE … USER MANUAL

‚„‚

„

ƒƒ



N IN

Page 3

Warning

Warranty

WARRANTY VOUCHER

Model .........................

Serial number .........................

Defect found ...........................................................................

Customer signature

Date _ _ / _ _ / _ _ .............................

To return correctly filled in together with the purchase receipt

DEALER’S STAMP AND SIGN

Warranty

Dear customer,

thank you for choosing our product, which has been designed and manufactured to the highest quality standards.

• The product is covered by a warranty, for a period of 24 months, which is testified from a delivery document indicating the date of purchase of the product and the dealer’s name.

• The customer is entitled to the rights provided for by Legislative Decree n° 24/2002

• The warranty covers the replacement or the repair operation of all the parts found to have manufacturing defects.

• The warranty does not cover:

› failures caused by carelessness or transport. › failures caused by installation not in accordance with the instructions › failures caused by improper, incorrect or not in accordance with the instructions, use of the device

• The manufacturer cannot be held responsible for accidental damages to persons, pets, or things, as a consequence of non-conformity with all the precautions furnished with the instructions manual.

› In the event you require service, during the warranty period, you should fill in and show the present cer-

tificate, together with a valid receipt issued by the dealer, showing the date of purchase of the product.

CAUTION

This symbol means impor-

tant instructions. Failure to heed them can result in serious injury or death

U S E TH E C O RR EC T A M PE RE R A T I N G W HE N R EP LA CI NG FUSES

Failure to do so may result in fire or electric shock

H A L T U S E I F A P R O B L E M APPEARS

Failure to do so may cause personal

D O N O T O P E R A T E A N Y

injury or damage to the product.

FUNCTION THAT TAKES YOUR

DO NOT USE OLD BATTERIES

ATTENTION AWAY FROM SAFELY

When inserting batteries in the

DRIVING YOUR VEHICLE

remote control, be sure to observe

Any function that requires your

proper polarity as instructed.

prolonged attention should only be

Rupture or chemical leakage from

performed after coming to a

the battery may cause malfunction

complete stop.

ing, break or injury.

Always stop your vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

USE THIS PRODUCT FOR MOBILE 12/24 Vcc APPLICAT IONS AND NEGATIVE GROUND

Any misuse that diverts from the designed application may result in fire, electric shock or other injury.

DO NOT DISASSEMBLE OR ALTER THE UNIT

Doing so may result in accidents or injuries.

Page 4

Warning

Precautions and Safety

QTM10 complies with:

E24: according to ECE R10

DiGiTVi: specifications D-Book ver.1.0 - june 2004 and following updates

where available

TÜV: the product suits TÜV norms and the quality certificate n° 951001196

CAUTION:

Your receiver is supplied with an operating system and resident programs.

Furthermore, while using it, you could have downloaded other softwares.

You should undertake not to use improperly any of

these types of software or parts of them.

Improper use means: duplication, distribution,

tampering. In other words, that the only allowed usage is the one described in this user manual.

PRECAUTIONS

TEMPERATURE

Be sure the temperature inside the vehicle is between +45°C a nd 0°C before turning your unit on.

FUSE REPLACEMENT

SAFETY

The replacement of the fuses must be of the same amperage. If one

VIDEO OUTPUT

fuse blows more than once, care-

In order to ensure vehicle safety,

fully check all electrical connections

the driver’s side screen must be con-

to prevent short circuits. Also have

nected to the front video output con-

your vehicle’ s voltage regulator

nector. This will ensure the driver

checked.

won’t be able to watch Tv while the vehicle is moving, if the handbrake

MAINTENANCE

wire is pro perly con necte d. The

If y o u h a v e pr o b le m s , d o n ot

driver will be able to watch Tv once

attempt to repair the unit yourself.

the handbrake is pulled. The rear

Require assistance at the nearest

passenger screens, connected to

retailer or service station.

the rear video output connectors, do not fall under this restriction.

INSTALL LOCATION

Install in dry, safe locations, away from dangers and humidity.

INSTALLATION PRECAUTIONS

Use only in cars with a 12/24 Vcc negative ground. Bef o r e c onn e c t ing t h e dev i c e remove the negative terminal from the battery to prevent short circuits. Do not use bolts or nuts related to any safety system (airbag, etc.), To make ground connection.

CAUTION

WATCHING TV WHILE

DRIVING MAY RESULT IN SERIOUS ACCIDENTS, INJURIES OR DEATH!

Page 5

Technical features Remote Control

Mobile DVB-T signal reception

Autotracking channels search

MultiCA System (NagraVision, Irdeto, Conax)

Favourite Channels List

Update software in local

2 audio/video input (DVD/CD, ...)

3 video output for three separated monitor

1 audio stereo output

Audio/video digital quality

Easy and fast plug-and-play installation

SCAN

A/V

P+

V+

CHANNEL

1 2

809

EXIT

BACK MUTE

LIST

info

RADIO

@? !.

ab c

gh i jk l

mn o

pq rs

tu v

_+ *

wx yz

de f

-TV/RADIO - YELLOW

to toogle Tv and Radio list

SCAN

to start autoscan

OK to select a function or to confirm the selection

LIST

to view channel list

P+/-

zapping channels

UP BUTTON to view info program or navigation button

RIGHT BUTTON navigation or volume adjust button

EXIT

to exit from the selected

option

0…9

alpha/numerical button

BACK

to return to the previous page

(where available)

MUTE

to switch on/off the audio input

-RED, BLUE, GREEN

navigation buttons

DOWN BUTTON

navigation button

LEFT BUTTON

navigation or volume adjust

button

-POWER

to switch on/off the unit

-A/V

to select audio/video inputs

DVB-T

Network Interface Module - DVB-T COFDM Dual-RF Diversity with Anti-Doppler Enhancement DVB / MPEG2 Transport and De-Multiplexing ISO/IEC 13818-1 MPEG-2 Transport Stream Compliance Nordig II and ETS 300 744 DVB-T Full Compliance Full 47~860 MHz Frequency Range for VHF and UHF OFDM Demodulation 2K and 8K FFT for SFN and MFN Symbol Rates : up to 34 MS/s Automatic Adjacent-Channel Interface Cancellation Supports QPSK and 16/64QAM Constellations Supports 1/4, 1/8, 1/16, 1/32 Guard Interval Supports FEC Decoding : 1/2, 2/3, 3/4, 5/6, and 7/8 Supports Reed-Solomon (204,188) ETS 300 477

Video Decoding and OSD

ISO/IEC 13818-2 MPEG-2 Video MP@ML Compliance ISO/IEC 11172-2 MPEG-1 Video Compliance Resolution: 720x576 for PAL 16:9/4:3, 3:2 Letterbox and Pan/Scan 65K Colour OSD

Audio Decoding

ISO/IEC 13818-3 MPEG-2 Audio Compliance ISO/IEC 11172-3 MPEG-1 Audio Compliance Stereo / MTS

Front Panel

IR Remote Connector Power LED Car Power Connector 12/24V Antenna-In : F-type x 2

Rear Panel

Stereo Audio Input (RCA) x 2 Composite Video Input (RCA) x 2 Stereo Audio Output (RCA) x 1 Mono Audio Output (RCA) x 1 Composite Video Output (RCA) x 3

Safety and Reliability

Operation temperature : -5 C ~ +55 C Storage temperature : -45 C ~ +85 C

Comsuptions

0.94 A in full operation powering two antennas

0.65 A in stand by 500 microA when off (car key off)

Mechanical Specification

Dimensions (WxDxH): 275mm x 140mm x 42mm

Page 6

Installation and Connections

ANTENNA

Front Panel

 6 POLE CONNECTOR - CAR POWER „ ANTENNA INPUT -

Input connector to power and control the First Tv antenna input unit. For the connection’s specifications read page 20

… ANTENNA INPUT -

Second Tv antenna input

‚ POWER LED

Voltage led indicator

ƒ Rj11 CONNECTOR

Connector for the remote control sensor

v TECHNICAL FEATURES

Operation frequencies: 174 - 230 (band III) 470 - 862 (bands IV - V)

Gain: 14 ± 2 dB Cable type: coaxial 75 ohm Cable lenght: 5 m Connector: type F Power: 12 Vcc Consumption: 25mA min - 35 mA max Temperature range : - 40° <> +85° C Protection class: IP40 Size (L x B x H): 28 x 2,5 x 1,5 cm

WARNING: Output voltage is always on (12Vcc) at the connectors F (ANT 1 and ANT 2) to power the antennas. DO NOT PO WE R T HE A NTE NN AS WI TH DIFFERENT VOLTAGE

ANT IN

Page 7

Rear Panel

Installation and Connections



TV ANTENNAS

active antennas

(DVB-T).

vINSTALLATION GUIDELINES

•



‚

•

Use only , amplified with adequate gain, directly powered by the F antenna connector (ANT IN) and suitable to the reception of the Digital Terrestrial signal Quantum Antennas, linked together with QTM10 receiver, have been manufactured in order to optimize the system's functioning.

WARNING: do not provide external power in case of use of different brand antennas, not to occur in doing so may result in product damages and in decay of warranty's terms.

Be sure to position the antennas as far away and opposing from each other as possible. For example, place the first antenna on the right side of the wind screen of the vehicle and the second one on the left side of the rear window or on the left rear vent wing .

Antennas must be installed as far away from the metal parts (vehicle's roof or vertical borders of the wind screen/rear vent wing) as possible.

The bonnet or the boot (depending on the vehicle) can influence whether positive or negative the signal reception. It's recommend to experiment where to place the antennas whether on the higher or the lower part of the window. The higher part usually guarantees more protection from noises caused by motorcycles and scooters.

Handle with care the coaxial cable setting in order to avoid damages due to vibration or crushing.

Be sure that the connections have been correctly set and check the screwing of the connectors. Signal reception's pr oblems are often caused by incorrect assembly.

 RCA L/R AUDIO OUTPUT - Stereo

‚ RCA VIDEO OUTPUT - Front

Video output to connect to the front monitor’s video input. Warning, signal is output only once the handbrake is pulled

ƒ RCA VIDEO OUTPUT - Rear 1

Video output to connect to a rear monitor video input. Signal is always available

„ RCA VIDEO OUTPUT - Rear 2

Video output to connect to a rear monitor video input. Signal is always available

… RCA AUDIO OUTPUT - Mono

† AUDIO/VIDEO INPUT- A/V IN 2

Audio/Video inputs to connect an auxiliary unit (e.g. Dvd player, rear camera, etc.). This input can be selected by remote control

‡ AUDIO/VIDEO INPUT- A/V IN 1

Audio/Video inputs to connect an auxiliary unit (e.g. Dvd player, rear camera, etc.). This input can be selected by remote control

NOTE: video outputs and inputs according to PAL Standard

frontrear 1rear 2

A/V IN 1

RRLLV

A/V IN 2

AUDIO OUT

R LM

VIDEO OUT

Page 8

First Use Installation and Connections

REAR PANEL

Be sure that every connection has been correctly set, as shown on the diagram at page 20-21

Turn the unit on

on the front panel is green after a few sec-

onds frame will be shown on the screen .

to start the automatic channel tun-

ing It's possible to stop the by pressing EXIT but-

ton. Frame will be shown on the screen. Press button to confirm the stop or the button to resume it.

press button to store the channels in the TV LIST. The first channel in the up-to-date TV LIST will be shown on the screen.

If at the end of the tuning frame is shown on the screen, check the connections and the installation parameters of the receiver, then press in sequence

buttons to restart the tun-

ing

on the front panel switched off: check the connections and begin the getting started operations again.

v Getting started

• POWER LED :



› press [OK] button

tuning

‚ [OK]

tuning [EXIT]

At the end of the tuning frameƒ will be shown on the

screen.

› [OK]

„

[EXIT], [SCAN] e [OK]

• POWER LED is

AUXILIARY SOURCE (e.g. DVD player, etc.)

FRONT REAR REAR

AUDIO

STEREO

AUDIO MONO

TUNING

[OK] to start search - [EXIT] to quit

TUNING

No services found - [EXIT] to quit

RADIO

50% 100%

TUNING

[OK] to stop - [EXIT] to continue

TV 12

TV TV TV TV

RADIO RADIO

RADIO

50% 100%

TUNING

[OK] to save - [EXIT] to quit

TV 44

TV 1 TV 2 TV 3 TV 4

RADIO 1 RADIO 2 RADIO 3 RADIO 4

RADIO

50% 100%

frontrear 1rear 2

A/V IN 1

RRLLV

A/V IN 2

AUDIO OUT

R LM

VIDEO OUT

Page 9

KEY (white) - Ignition lead „+12/24V (red) - Power lead (+)

Connect to an accessory terminal in the fuse Connect to a live terminal in the fuse block block controlled by the car ignition key connecting to the car battery (+12V=ON)

…GROUND (black) - Power lead (-)

‚GROUND (black) - Power lead (-)

Connect to the battery negative pole (car

Connect to the battery negative pole (car chassis)

chassis)

†AUX +12V (grey) - Power output lead for

ƒBRAKE (blue) - Parking brake control

accessory parts

lead Connect to the device to feed (12V/30 mA

Connect to parking brake of the car ( video max). The device is supplied with power

output enable) when it is switched on.

Installation and Connections

FRONT PANEL

First Use

WARNING: Voltage is always on (12Vcc) at the connectors F (ANT 1 and ANT 2) to power the antennas. DO NOT POWER THE ANTENNAS WITH DIFFERENT VOLTAGE

FAVOURITE TV

1 Channel TV

2 Channel TV

3 Channel TV

4 Channel TV

5 Channel TV

6 Channel TV

7 Channel TV

TV LIST

[GREEN] to change list

TUNING

[OK] to start search - [EXIT] to quit

TV LIST

ADD FAVOURITE: [OK] to confirm - [EXIT] to quit

SETTINGS

DIAGNOSTICS

CREATE

SORT

DEL.CHAN

DEL.LIST

FAVOURITE TV

TV LIST

1 Channel TV

2 Channel TV

3 Channel TV

4 Channel TV

5 Channel TV

6 Channel TV

7 Channel TV

[GREEN] to change list

1 1

v Autotracking and Autosearch

These innovative functions make the receiver's daily use easier.

They have the purpose to select a channel by the remote

control and to show it without starting a tuning manual searching, in case of frequencies changing during the transmissions.

To optimize Autotracking and Autosearch functions it's

necessary to follow carefully the instructions:

1.Start an autoscan to tune the available channels in that specific area by pressing [SCAN] button 

2. C re a te a FA VOU RI TE T V LI S T t o or gan ize in sequence your own favourite channels ‚

3. Select the FAVOURITE TV LIST as default ƒ

If autosearch does not allow to tune all the favourite

channels, start again the operations described at the point 1 and 2 in an other geographic area.

WARNING: channels marked with this symbol are

temporarily not available upon network coverage „.

WARNING: channels marked with this symbol are

temporarily not available upon network coverage .„

GND

ANT IN

IR Receiver

 • KEY - White

‚ • GROUND - Black

ƒ • BRAKE - Blue

„ • IN +12/24V - Red

… • GROUND - Black

† • AUX +12V - Grey

ANTENNA 2

ANTENNA 1

Page 10

Installation

1910

Daily Use

v How to switch the receiver on

Use the [ ] button on the remote control to turn the

receiver on/off

v How to select a channel

A Tv or Radio channel can be selected by three different

modes:

• DIRECT: select the desired channel by using the numerical buttons …

• ZA PPING: s elect th e desi red chan nel by using th e up/down buttons[5] e [6]‡ and press [OK]ƒ to confirm the selection.

INFORMATION BAR will be previewed on the screenˆ

before the channel tuning.

• DIRECT ZAPPING: press [P+] [P-]† to browse directly trough the channels without using the [OK]ƒ button.

15 Channel TV

Program title

TV 12:17

12:00 12:45

““

SCAN

A/V

P+

V+

CHANNEL

1 2

809

EXIT

BACK MUTE

LIST

info

RADIO

@? !.

ab c

gh i jk l

mn o

pq rs

tu v

_+ *

wx yz

de f



‚

… ƒ„†

‡

WARNING

MAKE THE CORRECT CONNECTIONS

Failure to make the proper connections may result in product damage

USE ONLY IN CARS WITH A 12 / 24 Vcc NEGATIVE GROUND

HAVE THE INSTALLATION DONE BY

Failure to do so may result in fire, electric

QUALIFIED PERSONNEL

shock or other injury

The installation and wiring of this unit require special technical skills and expe-

BEFORE WIRING DISCONNECT THE

riences. To ensure safety always have

CAB LE FR OM THE NEGAT IVE (- )

the installation done by experts

BATTERY TERMINALS

Failure to do so may result in ele ctric

USE SPECIFIED ACCESSORY PARTS

shock or injury due to electrical shorts

Be sure to use only the specified accessory parts. Use of other than designed

DO NOT SP LIC E INTO ELECT RIC AL

accessory parts may damage this unit or

CABLES

cause an incorrect functioning of the

Never cut away cable insulation to supply

appliance

power to other equipment. Doing so will exceed the current carrying capacity of

ARRANGE THE WIRING CORRECTLY

the wire and result in fire or electric shock

Route the electrical and audio/video cables and wiring away from moving

DO NOT USE BOLTS OR NUTS IN THE

parts or sharp or pointed edges. This

BR AK E OR ST EE RIN G S YST EM TO

will prevent crimping and damage to the

MAKE GROUND CONNECTIONS

wiring. If wiring passes through hole in

Bolts or nuts used for the brake or steer-

metal, use a rubber grommet to prevent

ing systems (or any other safety-related

the wires insulation from being cut by

system), or tanks should NEVER be used

the metal edge of the hole

for installations or ground connections

DO NOT INSTALL IN LOCATIONS

DO N OT I NST A LL I N LO C ATI O NS

WITH HIGH MOISTURE OR DUST

WH ICH MI G HT HIN DER VE H IC LE

Avoid installing the unit in locations with

O P E RA TI ON , S UC H A S T HE

high incidence of moisture or dust.

STEERING WHEEL OR GEARSHIFT

Moisture or dust that penetrates into

Doing so may obstruct forward vision or

this unit may result in product failure

hamper movement etc., and result in serious accident

WARNING:

Before installing the device read carefully the following instructions

Page 11

Daily Use

Audio/Video Switching

v H o w t o s ele c t a chan n el in a

TV/Radio List

• Press [LIST] to show the Tv List › press [GREEN]‚ to toggle the general TV LIST or

the FAVOURITE TV LIST if previously preset [see MENU]

• Press [TV/RADIO]ƒ (yellow) to show the RADIO LIST › press the same button to toggle between the Radio

List or the previously selected TV LIST

• Select the desired channel

WARNING: channels marked with this symbol are temporarily not available upon network coverage ˆ

v How to adjust the volume level

The volume level can be adjusted by using the [VOL+] [VOL-] buttons

v Mute

• Press [MUTE]… button to switch on/off the audio

output

v How to view program info

• Press [info]† to view the short information about the selected program

• Press [BLUE]‡ to get detailed informations.

v How to select the audio language

To select the desired language in case of multilanguage

programs follow the instructions:

• Press [info]† + [GREEN]‚ and select the desired language by using the up/down[5] [6]† buttons

channels marked with this symbol are

temporarily not available network coverage

FAVOURITE TV

1 Channel TV

2 Channel TV

3 Channel TV

4 Channel TV

5 Channel TV

6 Channel TV

7 Channel TV

TV LIST

[GREEN] to change list

““

SCAN

A/V

P+

V+

CHANNEL

1 2

809

EXIT

BACK MUTE

LIST

info

RADIO

@? !.

ab c

gh i jk l

mn o

pq rs

tu v

_+ *

wx yz

de f



‡

‚

…

†

„

RADIO

‡



ƒƒ

v Audio/Video Switching

Suppose to connect a device (e.g. Videogame console) to A/V IN1 input, and a second one (DVD player) to A/V IN2 input. The decoder can be set in three different modes that lead to the following configurations:

Ÿ QTM10 on TV

FRONT and REAR monitors display Tv signal

Ÿ QTM10 on AV 1 (press [A/V] button)

FRONT and REAR monitors display the signal coming from the device (e.g. a Videogame console)

connected to A/V IN 1‚

Ÿ QTM10 on AV 2 (press [A/V] button)

FRONT and REAR monitors display the signal coming from the device (e.g. a DVD player) connected to A/V IN 2ƒ

Ÿ QTM10 on Stand-by

FRONT monitor displays the signal coming from the device connected to A/V IN 2 „

„„

‚

Page 12

Audio/Video Switching



SCAN

A/V

LIST

P+

info

v Audio/video Inputs

The receiver enables the user to connect two auxiliary

devices (e.g. Videogame console, Dvd player, etc..) to the audio/video input (A/V IN 1 and IN 2) and to select them by the remote control.

How to select audio/video inputs:

Switch the receiver on the Tv signal and proceed as follow

to select the desired input:

• Press [A/V]

Frame 2‚ will be shown on the screen and, after a

few seconds, the receiver displays the signal from A/V IN1 input [AV 1]

• Press [A/V] again

Frame 3 ƒ will be shown on the screen and, after a

few seconds, the receiver displays the signal from A/V IN2 input [AV 2]

• Press [A/V] again

Frame 4 „ will be shown on the screen and, after a

few seconds, the receiver displays TV signal [TV]

WARNING: FRONT monitor displays the signal only

once the handbrake is pulled

v MENU

The main MENU‡ is used to set user’s preferences

Sub-menus:

• SETTINGS

• TV LIST

• DIAGNOSTICS

v How to show the Menu

• Press [MENU]‚on the remote control

SCAN

A/V

P+

V+

CHANNEL

EXIT

info

„ 

LIST

‚…

SETTINGS

Receiver settings: [OK] to confirm - [EXIT] to quit

DIAGNOSTICS

TV LIST

’’

ŽŽ



3 3



AV 1

AV 2

Page 13

Menu - DIAGNOSTICS

Menu - SETTINGS

SCAN

A/V

P+

V+

CHANNEL

EXIT

info

‚ƒ„

LIST

…

DIAGNOSTICS

Signal and receiver: [OK] to confirm - [EXIT] to quit

SETTINGS

TV LIST

[OK] to confirm - [EXIT] to quit

’’

TV out 4/3 pan & scan

Timer sleep 03h

Menu language ita

SCAN

A/V

P+

V+

CHANNEL

EXIT

info

‚ƒ„

LIST

…

’’

v SETTINGS

This sub-menu shows the data related to:

• RECEIVER

• RESTORE

• CLOCK

WARNING: Do not accidentally change the parameters in

order to avoid the misfunctioning of the device. Default settings are normally correct for standard installation.

They can be restored through the RESTORE function w

v How to navigate the Settings Menu

• press [MENU]‚ to view the main menu on the screen

• select SETTINGS by using the right and left [3] [4]ƒ

buttons.

• press OK to enter this sub-menu and then press it again

till you get the required item

• select the desired function first by using the right and

left buttons [3] [4]ƒ and then the up and down [5] [6]„ buttons

• press [OK]„ to confirm the selection and to move to

the next function or [EXIT]… to cancel the selection

v DIAGNOSTICS

Receiver has two different diagnostics features:

• SIGNAL LEVEL

• RECEIVER DATA

s How to view the DIAGNOSTICS:

• press [MENU];

• select DIAGNOSTICS by using the right and left [3]

[4]‚ buttons

• press [OK]ƒ to confirm the selection or [EXIT]… to can- cel it.

SETTINGS

DIAGNOSTICS

TV LIST

RECEIVER

RESTORE

CLOCK

SETTINGS

Receiver settings: [OK] to confirm - [EXIT] to quit

DIAGNOSTICS

TV LIST

Page 14

Menu - TV LIST

1514

Menu - SETTINGS

w RECEIVER†

• TV OUT

Set tv out mode according your screen type‡: › 4:3 pan&scan › 4:3 letter box › 16:9

• MENU LANGUAGE To select the menu language

w RESTORE‡

This function enable s the use r to reset the input data

among these data categories:

• RECEIVER DATA

To reset settings, system and installation parameters

• CHANNELS LIST

To delete all the channels lists

• SOFTWARE UPDATE

To update the receiver software

WARNING: This process must be carried out by experts

It’s possible to make a complete data’s restore by selecting

all the items

w CLOCKˆ

The receiver's clock will be automatically updated through

the tv signal. It's possible, if desired, to change the time zone, set at GMT+1 by default

SETTINGS

DIAGNOSTICS

TV LIST

CLOCK

RECEIVER

RESTORE

““““

SETTINGS

[OK] to confirm - [EXIT] to quit

DIAGNOSTICS

TV LIST

RECEIVER

RESTORE

CLOCK

TV out 4/3 pan & scan

Menu language ita

††

SETTINGS

[OK] to confirm - [EXIT] to quit

DIAGNOSTICS

TV LIST

RESTORE

CLOCK RECEIVER

Receiver Data ON

Channel List OFF

Software OFF Download

’’

[OK] to confirm - [EXIT] to quit

Local time 11:23

Greenwich time 09:23

Offset +-01:00

v How to manage the Favourite Tv List

It's possible to create a personal favourite Tv List.

TV LIST and RADIO LIST, include all the tuned channels, so

they are not allowed to be personalized

1. How to create the Favourite Tv List:

• press [MENU]‚

• select TV LIST and press [OK]„ to confirm

• select CREATE and press [OK]„ to confirm

• browse the list sequentially by using the up and down buttons [5][6]… , or in groups of six channels by using right and left buttons [3][4]ƒ and select the channel

• press [OK]„ to confirm the selection. A tick signal ü will be shown next to the selected channel‡

• If you want to cancel the selection press [OK]„ again and the tick mark ü will be deleted

2. How to delete a channel from the Favourite Tv List:

Follow the same procedure as shown at the point 1 and

replace CREATE with DEL.CHAN.

3. How to sort the Favourite Tv List:

• press [MENU]‚

• select TV LIST and press [OK]„to confirm

• select SORT LIST and press [OK]„to confirm

• browse the list sequentially by using the up and down buttons [5][6]… or in groups of six channels by using the right and left buttons[3][4]ƒ and select the channel you want to move

• browse the list in the same way and click on the position where you want to move the selected channel. A tick mark3will be shown next to the selected channel

• press [OK]„ to confirm the new position of the channelˆ

4. How to delete the Favourite Tv List:

Follow the same procedure as shown at the point 1 and

replace CREATE with DEL.LIST

‚†

SCAN

A/V

P+

V+

CHANNEL

EXIT

info

ƒ„…

LIST

[EXIT to quit and save

TV LIST

SETTINGS

DIAGNOSTICS

CREATE

SORT LIST

DEL.CHAN

DEL.LIST

’’

1 Channel TV

2 Channel TV

3 Channel TV

4 Channel TV

5 Channel TV

6 Channel TV

ü ü

[EXIT] to quit and save

1 Channel TV 01

2 Channel TV 02

3 Channel TV 03

4 Channel TV 04

5 Channel TV 05

6 Channel TV 06

3 3

4 4

TV LIST

SETTINGS

DIAGNOSTICS

SORT DEL.CHAN

DEL.LIST CREATE

““““

Quantum QTM10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual