Quantum QP350 User Manual
7120350101
QP350 Digital Two-Way Radio
USER MANUAL
Quantun Electronics, LLC
1
THANK YOU
We are grateful for you choice of Quantun production. This
Professional Digital two-way radio incorporates the advanced
technology and craft. You will be pleased with the quality and
features of our product. Please read this manual carefully to ensure
you know how to property operate the radio before use.
2
CONTENTS
User Safety Information
Compliance with RF Energy Exposure Standards
Precautions and notices
Product Inspection
Radio Overview
Parts of the Radio
The functions of the LEDs and Beeps Table
Programmable Auxiliary Functions
Radio embedded features
Getting Started
Battery
Antenna
Accessory Installation
Basic Operations
Call
VOX Operation
Advanced Operations
Troubleshooting
Care and Cleaning
Service
3
User Safety Information
READ THIS IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION BEFORE USING YOUR
QUANTUN PORTABLE TWO-WAY RADIO.
Compliance with RF Energy Exposure Standards
Your Quantun two-way radio is designed and tested to comply with a number of national
and international standards and guidelines (listed below) regarding human exposure to
radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and
ICNIRP exposure limits for occupational/controlled RF exposure environment at duty
cycles of up to 50% talk-50% listen and should be used for occupational use only. In terms
of measuring RF energy for compliance with the FCC exposure guidelines, your radio
radiates measurable RF energy only while it is transmitting (during talking), not when it is
receiving (listening) or in standby mode.
Note: The approved batteries supplied with this radio are rated for a 5-5-90 duty cycle
(5% talk-5% listen-90% standby), even though this radio complies with the FCC
occupational RF exposure limits at duty cycles of up to 50% talk.
Your Quantun two-way radio complies with the following of RF e ne rg y exposure
standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations;
47CFR part 2 sub-part J
American National Standards Institute (ANSI)/Institute of Electrical and Electronic
Engineers (IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio
Frequency Electromagnetic Fields in the Frequency Range from 3KHz to 300GHz,
1999
4
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential
requirements and other relevant provisions of the Directive 1999/5/EC. Please note
that the above information is applicable to EU countries only.
Precation and Notices
Government law prohibits the operation of unlicensed radio transmitters. Illegal
operation is punishable by fine or imprisonment Of both.
To avoid problem caused by electromagnetic interference and electromagnetic
compatibility, please turn off the transceiver at the sites where you are required, such
as hospital, airplane etc.
In the vehicle equipped with air bag safety, don't put the transceiver within the scope
of the air bag inflation.
Please turn off the transceiver before step into the inflammable and explosive places.
Don't transmit for a long time, it may damage the transceiver or it may cause scald.
Don't use the transceiver which antenna is damaged or else when the exposed metal
touch the skin, it may cause scald also.
Don't expose the transceiver to long periods of direct sunlight, nor place it close to
heating appliances.
If belt the transceiver on with belt clip, please notice that the distance Between body
and antenna should be more than 5cm when transmitting.
If an abnormal odor or smoke is detected coming from the transceiver, switch OFF
the power immediately and remove the optional battery pack from the transceiver.
Contact our dealer nearby.
5
Product Inspection
Please carefully take the transceiver out of the box. We recommend that you confirm the
items listed in the following table are enclosed before discarding the box. If any items are
missing or have been damaged during shipment, file a claim with the carrier immediately.
Available Accessories
Item Qty. (Pcs.)
Antenna 1
Belt Clip 1
Screws(Belt Clip) 2
Battery 1
AC Adapter 1
Nylon Strap 1
User’s Manual 1
6
Radio Overview
Parts of the Radio
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
(1) Power Switch (2) Antenna
(3) Volume Adjust
Keys[+]
(4) PTT Key
(5) SK(Programmable
Side Key)
(6) Volume Adjust
Keys[-]
(7) Microphone (8) Charging
Terminal
(9) Channel Selector
Knob
(10) Status
Indicator
(11) Charge
Indicator
(12) Charge DC
Jack
(13)External Earphone
Jack
(14) External
Earphone Jack
(15) Speaker (16) Screw(Belt
Clip)
(17) Belt Clip (18) Rear Cover (19) Battery Latch
7
The functions of the LEDs and beeps Table
Power on When the radio is turned on, the power on alert tone
sounds and status Indicator flashes green once. When the
current channel is a blank channel, the radio sounds beep
tone continuously.
Power off When the radio is turned off, the power off alert is heard.
Low battery alert
Status Indicator flashes red, and a Di-Di-Di tone sounds at
intervals of 10 seconds.
Transmitting Status Indicator glows red when transmitting.
When TOT timer expires, the radio sounds beep tone
continuously.
TOT pre-alert:: A beep is heard.
Receiving
Status Indicator glows green when carrier is present.
Call ended (within the
presettime period)
LED glows orange
Scanning
Status Indicator flashes green once every 1 second, while
scanning is in process.
Scan Start Alert Tone (programmable by your dealer): A
beep is heard.
When signal is received on a certain channel, Status
Indicator solidly glows green.
Scan Exit Alert Tone (programmable by your dealer): Two
beep is heard.
Power adjust
A low-pitched tone is heard when transmit power is
switched from high power to low power.
A high-pitched tone is heard when transmit power is
switched from low power to high power.
VOX One beep sounds when the VOX feature is activated.
Two beeps sound when the VOX feature is disabled.
Loading...