Quantum Q100T, Q100TH Quick Manual
Q100T/Q100TH
Quick Guide
Quantum s.r.l
Via Cadorna, 67 - 20090 Vimodrone (MI)
Www.qtmtv.it
27
2
Index
Warning
Precautions and safety
Remote control
Audio/Video switch
Multimedia
Receiver Menu
Settings
Tv List
Diagnostics
DVB-T First Use
DVB-T Daily Use
DVB-H Mode (*)
DVB-H PayTV (*)
Installation
Installation and Connections
Technical features
Warning
Warranty
EQUIPMENT
Each contains:box
RECEIVER
REMOTE CONTROL
REMOTE INFRARED SENSOR
POWER CAR CABLE
QUICK GUIDE
Page 3
“4
“5
“6
“8
“10
“11
“12
“12
“14
“15
“16
17
19
“20
“24
“25
“26
(*) applicable only to Q100TH version
Warning
!
3
CAUTION
This symbol means important instructions. Failure to heed
them can result in serious injury or
death
DO NOT OPERATE ANY
FUNCTION THAT TAKES YOUR
ATTENTION AWAYFROM SAFELY
DRIVING YOUR VEHICLE
Any function that requires your
prolonged attention should only be
performed after coming to a
complete stop.
Always stop your vehicle in a safe
location before performing these
functions. Failure to do so mayresult
in an accident.
USE THIS PRODUCT FOR MOBILE
12/24 Vcc APPLICATIONS AND
NEGATIVE GROUND
DO NOT DISASSEMBLE OR ALTER
THE UNIT
USE THE CORRECT AMPERE
RATING WHEN REPLACING
FUSES
STOP USE IF A PROBLEM
APPEARS
DO NOT USEOLD BATTERIES
Any misuse that diverts from the
designed application may result in
fire, electric shock or other injury.
Doing so may result in accidents or
injuries.
Failure to do so may result in fire or
electric shock
Failure to do so may cause personal
injury or damage to the product.
When inserting batteries in the
remote control, be sure to observe
proper polarity as instructed.
Rupture or chemical leakage from
the battery may cause malfunction
ing, break or injury.
!
26
IMPORTANT:
Quantum S.p.A. declines all
responsibibty for any errors or omissions in this guide and reserves the
right to make changes without prior
notice.
The information given in this guide
were correct at the time of going to
print.
Warranty
WARRANTY VOUCHER
Model .........................
Serial number .........................
Defect found ...........................................................................
.............................
Customer signature
Date _ _ / __ / _ _
Toreturn correctly filled in togetherwith thepurchase receipt
DEALER’S STAMPAND SIGN
Warranty
Dear customer,
thank you for choosing our product, which has been designed and manufactured to the highest quality
standards.
› failures caused by carelessnessor transport.
› failures caused by installationnot in accordance with theinstructions
› failures caused by improper, incorrect or notin accordance with the instructions,use of the device
› In theevent you require service, during the warrantyperiod, you shouldfill in and show the present
certificate, together with a valid receipt issued by the dealer, showing the date of purchase of the
product.
• The product is covered by a warranty,for a period of 24 months, whichis testified from a deliverydocument
indicating the dateof purchase of the productand the dealer’s name.
• The customer is entitledto the rights provided forby Legislative Decree n° 24/2002
• The warranty covers the replacement or the repair operation of all the parts found to have manufacturing
defects.
• The warranty does not cover:
• The manufacturer cannot be held responsible for accidental damages to persons, pets, or things, as aconsequence of non-conformitywith all the precautions furnishedwith the instructions manual.
4
Precautions and Safety
!
PRECAUTIONS
TEMPERATURE
Be sure the temperature inside the
vehicle is between +45° C a nd 0°C
before turning yourunit on.
The replacement of the fuses must
be of the same amperage. If one
fuse blows more than once, carefully check all electrical connections
to prevent short circuits. Also have
your vehicle’ s voltage regulator
checked.
If you have problems, do not
attempt to repair the unit yourself.
Require assistance at the nearest
retailer or service station.
Installindry,safelocations,away
from dangers and humidity.
Use only in cars with a 12/24 Vcc
negative ground.
Before connecting the device
remove the negative terminal from
the battery to prevent short circuits.
Do not use bolts or nuts related to
any safety system (airbag, etc.), To
make ground connection.
In order to ensure vehicle safety,
the driver’s side screen must be connected to the front video output connector. This will ensure the driver
won’t be able to watch TV while the
vehicle is moving, if the handbrake
wire is properly connected. The
driver will be able to watch TV once
the handbrake is pulled. The rear
passenger screens, connected to
the rear video output connectors,
do not fallunder this restriction.
FUSE REPLACEMENT
MAINTENANCE
INSTALL LOCATION
INSTALLATION PRECAUTIONS
VIDEO OUTPUT
SAFETY
CAUTION
WATCHING TV WHILE
DRIVING MAY RESULT IN SERIOUS
ACCIDENTS, INJURIES OR DEATH!
!
25
Warning
!
Q100 series complies with:
CAUTION:
E24: according toECE R10-03 Regulation
DiGiTVi: specifications D-Book ver.1.0 - June 2004 and following
updates where available
Your receiver is supplied with an operating system and resident programs.
While using the receiver, various softwarecould be downloaded.
You should NOT use improperly any of these softwares wholly or partly for
any reason otherthan that mentioned in the user manual.
Improper use means: duplication, distribution, tampering. In other words,
that the only allowed usage in the one described inthis user manual.
Remote Control
5
i
SCAN
OK
P+
P
V+
CHANNEL
12
3
4
5
6
7
809
EXIT
BACK MUTE
LIST
info
MENU
TV
RADIO
@?!.
abc
ghi jkl
mno
pqrs
tuv
_+ *
wxyz
def
-TV/RADIO -YELLOW
to switch between TV/Radio
listing
SCAN
to start autoscan
-
to select a function or to
confirm the selection
OK
LIST
to view channel list
-
P+/-
zapping channels
-
to view info on a program or
navigation button
UP BUTTON
navigation or volume adjust
button
RIGHT BUTTON
EXIT
to exit from the selected
option
-
0…9
alpha/numerical button
-
BACK
to return to the previous page
(where available)
-
MUTE
to switch on/off the audio
input
-BLUE, GREEN
navigation buttons
DOWN BUTTON
navigation button
LEFT BUTTON
navigation or volume adjust
button
-
STAND-BY
to put the unit on stand-by
and switch to a/v input
to manually search/track a
tuned channel
SEARCH
SEARCH
24
Technical features
Mobile DVB-T signal reception
Autotracking/Autosearch
Favourite Channels List
2 video for separated monitor
1 audio stereo
Audio/video digital quality
Easy and fast plug-and-play installation
output two
output
1 video input
1 audio stereoinput
DVB-T
DVB-H (*)
Video Decoding and OSD
Audio Decoding
Connections
ISO/IEC 13818-1 MPEG-2 Transport Stream
ETS 300 744 DVB-T Full Compliance
VHF (Band III) / UHF 21-69
DVB-T COFDM 2k/8k supported
7,8 mhZ bandwidth support
OSF IPDC ESG compliant
UHF bandwith, channels 21-69
COFDM 2k/4k/8k supported
6,8 mhZ bandwidth support
Advanced high definition video decoding
(H264)
Advanced standard definition video decoding
(H264/MPEG2)
Resolution: 720x576 for PAL
16:9/4:3, 3:2 Letterbox and Pan/Scan
65K Colour OSD
Advanced multi-channel audio decoding
(MPEG 1, 2, MP 3, AAC/AAC+)
Stereo / MTS
IR Remote Connector
Antenna-In : Fakra type 2x
Audio stereo Output (RCA L/R) 1x
Composite Video Output (RCA) 2x
Stereo Audio Input (RCA L/R) 1x
Composite Video Input (RCA) 1x
Safety and Reliability
Comsuptions
Mechanical Specification
Operation temperature : -5 C ~ +55 C
Storage temperature : -45 C ~ +85 C
0.7 A in full operation powering two antennas
0.65 A in stand by
500 microA when off (car key off)
Dimensions (WxDxH): 148mm x 107mm x 35mm
(*) applicable only to Q100TH model
-RED (*)
Options list
Loading...