Q100T/Q100TH
Quick Guide
Quantum s.r.l
Via Cadorna, 67 - 20090 Vimodrone (MI)
Www.qtmtv.it
27
2
Index
Warning
Precautions and safety
Remote control
Audio/Video switch
Multimedia
Receiver Menu
Settings
Tv List
Diagnostics
DVB-T First Use
DVB-T Daily Use
DVB-H Mode (*)
DVB-H PayTV (*)
Installation
Installation and Connections
Technical features
Warning
Warranty
EQUIPMENT
Each contains:box
RECEIVER
REMOTE CONTROL
REMOTE INFRARED SENSOR
POWER CAR CABLE
QUICK GUIDE
Page 3
“4
“5
“6
“8
“10
“11
“12
“12
“14
“15
“16
17
19
“20
“24
“25
“26
(*) applicable only to Q100TH version
Warning
!
3
CAUTION
This symbol means important instructions. Failure to heed
them can result in serious injury or
death
DO NOT OPERATE ANY
FUNCTION THAT TAKES YOUR
ATTENTION AWAYFROM SAFELY
DRIVING YOUR VEHICLE
Any function that requires your
prolonged attention should only be
performed after coming to a
complete stop.
Always stop your vehicle in a safe
location before performing these
functions. Failure to do so mayresult
in an accident.
USE THIS PRODUCT FOR MOBILE
12/24 Vcc APPLICATIONS AND
NEGATIVE GROUND
DO NOT DISASSEMBLE OR ALTER
THE UNIT
USE THE CORRECT AMPERE
RATING WHEN REPLACING
FUSES
STOP USE IF A PROBLEM
APPEARS
DO NOT USEOLD BATTERIES
Any misuse that diverts from the
designed application may result in
fire, electric shock or other injury.
Doing so may result in accidents or
injuries.
Failure to do so may result in fire or
electric shock
Failure to do so may cause personal
injury or damage to the product.
When inserting batteries in the
remote control, be sure to observe
proper polarity as instructed.
Rupture or chemical leakage from
the battery may cause malfunction
ing, break or injury.
!
26
IMPORTANT:
Quantum S.p.A. declines all
responsibibty for any errors or omissions in this guide and reserves the
right to make changes without prior
notice.
The information given in this guide
were correct at the time of going to
print.
Warranty
WARRANTY VOUCHER
Model .........................
Serial number .........................
Defect found ...........................................................................
.............................
Customer signature
Date _ _ / __ / _ _
Toreturn correctly filled in togetherwith thepurchase receipt
DEALER’S STAMPAND SIGN
Warranty
Dear customer,
thank you for choosing our product, which has been designed and manufactured to the highest quality
standards.
› failures caused by carelessnessor transport.
› failures caused by installationnot in accordance with theinstructions
› failures caused by improper, incorrect or notin accordance with the instructions,use of the device
› In theevent you require service, during the warrantyperiod, you shouldfill in and show the present
certificate, together with a valid receipt issued by the dealer, showing the date of purchase of the
product.
• The product is covered by a warranty,for a period of 24 months, whichis testified from a deliverydocument
indicating the dateof purchase of the productand the dealer’s name.
• The customer is entitledto the rights provided forby Legislative Decree n° 24/2002
• The warranty covers the replacement or the repair operation of all the parts found to have manufacturing
defects.
• The warranty does not cover:
• The manufacturer cannot be held responsible for accidental damages to persons, pets, or things, as aconsequence of non-conformitywith all the precautions furnishedwith the instructions manual.
4
Precautions and Safety
!
PRECAUTIONS
TEMPERATURE
Be sure the temperature inside the
vehicle is between +45° C a nd 0°C
before turning yourunit on.
The replacement of the fuses must
be of the same amperage. If one
fuse blows more than once, carefully check all electrical connections
to prevent short circuits. Also have
your vehicle’ s voltage regulator
checked.
If you have problems, do not
attempt to repair the unit yourself.
Require assistance at the nearest
retailer or service station.
Installindry,safelocations,away
from dangers and humidity.
Use only in cars with a 12/24 Vcc
negative ground.
Before connecting the device
remove the negative terminal from
the battery to prevent short circuits.
Do not use bolts or nuts related to
any safety system (airbag, etc.), To
make ground connection.
In order to ensure vehicle safety,
the driver’s side screen must be connected to the front video output connector. This will ensure the driver
won’t be able to watch TV while the
vehicle is moving, if the handbrake
wire is properly connected. The
driver will be able to watch TV once
the handbrake is pulled. The rear
passenger screens, connected to
the rear video output connectors,
do not fallunder this restriction.
FUSE REPLACEMENT
MAINTENANCE
INSTALL LOCATION
INSTALLATION PRECAUTIONS
VIDEO OUTPUT
SAFETY
CAUTION
WATCHING TV WHILE
DRIVING MAY RESULT IN SERIOUS
ACCIDENTS, INJURIES OR DEATH!
!
25
Warning
!
Q100 series complies with:
CAUTION:
E24: according toECE R10-03 Regulation
DiGiTVi: specifications D-Book ver.1.0 - June 2004 and following
updates where available
Your receiver is supplied with an operating system and resident programs.
While using the receiver, various softwarecould be downloaded.
You should NOT use improperly any of these softwares wholly or partly for
any reason otherthan that mentioned in the user manual.
Improper use means: duplication, distribution, tampering. In other words,
that the only allowed usage in the one described inthis user manual.
Remote Control
5
i
SCAN
OK
P+
P
V+
CHANNEL
12
3
4
5
6
7
809
EXIT
BACK MUTE
LIST
info
MENU
TV
RADIO
@?!.
abc
ghi jkl
mno
pqrs
tuv
_+ *
wxyz
def
-TV/RADIO -YELLOW
to switch between TV/Radio
listing
SCAN
to start autoscan
-
to select a function or to
confirm the selection
OK
LIST
to view channel list
-
P+/-
zapping channels
-
to view info on a program or
navigation button
UP BUTTON
navigation or volume adjust
button
RIGHT BUTTON
EXIT
to exit from the selected
option
-
0…9
alpha/numerical button
-
BACK
to return to the previous page
(where available)
-
MUTE
to switch on/off the audio
input
-BLUE, GREEN
navigation buttons
DOWN BUTTON
navigation button
LEFT BUTTON
navigation or volume adjust
button
-
STAND-BY
to put the unit on stand-by
and switch to a/v input
to manually search/track a
tuned channel
SEARCH
SEARCH
24
Technical features
Mobile DVB-T signal reception
Autotracking/Autosearch
Favourite Channels List
2 video for separated monitor
1 audio stereo
Audio/video digital quality
Easy and fast plug-and-play installation
output two
output
1 video input
1 audio stereoinput
DVB-T
DVB-H (*)
Video Decoding and OSD
Audio Decoding
Connections
ISO/IEC 13818-1 MPEG-2 Transport Stream
ETS 300 744 DVB-T Full Compliance
VHF (Band III) / UHF 21-69
DVB-T COFDM 2k/8k supported
7,8 mhZ bandwidth support
OSF IPDC ESG compliant
UHF bandwith, channels 21-69
COFDM 2k/4k/8k supported
6,8 mhZ bandwidth support
Advanced high definition video decoding
(H264)
Advanced standard definition video decoding
(H264/MPEG2)
Resolution: 720x576 for PAL
16:9/4:3, 3:2 Letterbox and Pan/Scan
65K Colour OSD
Advanced multi-channel audio decoding
(MPEG 1, 2, MP 3, AAC/AAC+)
Stereo / MTS
IR Remote Connector
Antenna-In : Fakra type 2x
Audio stereo Output (RCA L/R) 1x
Composite Video Output (RCA) 2x
Stereo Audio Input (RCA L/R) 1x
Composite Video Input (RCA) 1x
Safety and Reliability
Comsuptions
Mechanical Specification
Operation temperature : -5 C ~ +55 C
Storage temperature : -45 C ~ +85 C
0.7 A in full operation powering two antennas
0.65 A in stand by
500 microA when off (car key off)
Dimensions (WxDxH): 148mm x 107mm x 35mm
(*) applicable only to Q100TH model
-RED (*)
Options list
6
DVB-T First Use
Q100 series is an automotive grade set top box - able to
receive multi-standard DVB digital TV: DVB-T in standard
definition (SD) and high definition (HD) and DVB-H.
By pressing the [Red] button on the remote control, one
could switch from DVB-T mode to DVB-H mode.
v Getting started
following installation instructionson s 19-22
[OK]
searching [EXIT]
› [OK] save
scan phase,
ove-
rall ;
tially the [EXIT], [SCAN] and [OK]
scan phase.
• Please wait until
› press [OK] button
search.
search
At the end of the scan phase, frame will be shown
on the screen.
Be sure that every connection has been correctly set
page
Turnthe unit on
frame will be shown onthe screen .
press button to the channels in the TV
LIST. The first channel in the up-to-date TV LIST
will be shownon the screen.
If at the end of the frame is shown
on the screen check the connections and the
installation of the receiver then press
sequen buttons
to restart the
to start the automatic channel
It's possible to stop the by pressing EXIT button. Frame will be shown on the screen. Press
button to confirmstop orthe button
to resume it.
SCAN
[OK] to start search - [EXIT] to quit
SCAN
No services found - [EXIT] to quit
0%
TV
0
RADIO
0
50% 100%
SCAN
[OK] to stop - [EXIT] to continue
0%
TV
12
TV
TV
TV
TV
RADIO
RADIO
RADIO
2
50% 100%
SCAN
[OK] to save - [EXIT] to quit
0%
TV
44
TV 1
TV 2
TV 3
TV 4
RADIO 1
RADIO 2
RADIO 3
RADIO 4
RADIO
3
50% 100%
23
Installation and Connections (*)
SIM INSERTION (*)
SIM
In the case of an existing DVB-H PayTV
subscription SIM based, please insert SIM card as
shown in the picture
(*) applicable only to Q100TH model
7
DVB-T First Use
TUNING
[OK] to start search - [EXIT] to quit
TV LIST
ADD FAVOURITE:[OK] to confirm - [EXIT] to quit
SETTINGS
DIAGNOSTICS
CREATE
SORT
DEL.CHAN
DEL.LIST
v Autotracking and Autosearch
This innovative automatic function allows the receiver to
follow the selected channel while moving from place to
place.
Typical DTT Networks are Multi Frequency Network (MFN)
that is, each TV channel may be transmitted on different
frequencies depending onthe specific geographical area.
Once a specific TV channel has been selected the,
Autotracking and Autosearch functions have the purpose
of tuning, tracking and in some cases automatically
searching for the channel where there is a frequency
change orsignal loss dueto movement inlocation, without
the need tostart a new searchmanually..
In order to have the Autotracking and Autosearch function
perform in the best possible way, it is recommended to
carefully the instructionsbelow:
- Tune the available channels in
that specific area
If autosearch does not allow the tuning into of all the
favourite channels, re-start operations by doing point 1
and 2 inan other geographic area.
1.Start an
2.Create a FAVOURITE TV LIST (from menu)
3. Select theFAVOURITE TV LIST as default
AUTOSCAN
by pressing [SCAN]button
- This
enables you to define and organize the list of your
favourite channels
WARNING: channels marked in red are
temporarily not available due to the lack of
network coverage .
WARNING: channels marked in red are
temporarily not available due to the lack of
network coverage .
FAVOURITETV
1 Channel TV
2 Channel TV
3 Channel TV
4 Channel TV
5 Channel TV
6 Channel TV
7 Channel TV
TVLIST
[GREEN] to change list
FAVOURITETV
TVLIST
1TV
2
Channel
ChannelTV
3 Channel TV
4 Channel TV
5 Channel TV
6 Channel TV
7 Channel TV
[GREEN] to change list
1
1
22
Installation and Connections
v TECHNICAL FEATURES
+ 5V DC PHANTOM POWERED DVB-T
ANTENNAS
Operation frequencies: 174 - 230 (band III)
470 - 866 (bands IV - V)
Gain: 18 dB Max
Cable type: coaxial 75 ohm
Cable lenght: 5 m
Connector: type FAKRA
Power: +5 Vcc
Consumption: 25mA min - 35 mA max
Temperature range : - 40° <>+85° C
Protection class: IP40
Size (L x B x H): 28x 2,5 x 1,5 cm
TV ANTENNAS
Specifications
8
DVB-T Daily Use
v
v
v
How to switchthe receiver on
How to selecta channel
Teletext
Depending on the specific car installation, the receiver will
be switched on as soon asthe car key turns on the battery.
In case an external a/v source was previously activated,
please use the [ ] button on the remote control to exit
stand-by mode.
A Tv or Radio channel can be selected in three different
modes:
[ ] and [ ] [OK]
INFORMATION BAR will be previewed on the screen
tuning.
DIRECT directly
trough the channelswithout using the [OK] button.
If the relevant digital service includes Teletext information, an OSDemulation of the Teletext home pagewill be
displayed (page nr.100).
All available pages can be accessed selecting relevant
number (using digitsbuttons) from the remote control.
(*) applicable onlyto Q100T model
• DIRECT:select the desired channelby using the numerical buttons
• ARROWS ZAPPING: select the desired channel by using
the up/downbuttons and press to
confirm the selection.
before the channel
• ZAPPING: press [P+] [P-] to browse
56
56
(*)
.
• Press either the [Red] button. The option list will be
displayed
• From the list press [Green] for Teletext OR using theup/down buttons [ ] and [ ] select Teletext, press
[OK]
15 Channel TV
rogramP title
TV 12:17
12:00
12:45
SCAN
A/V
OK
P+
P
V+
CHANNEL
12
3
4
5
6
7
809
EXIT
BACK MUTE
LIST
info
MENU
TV
RADIO
@?!.
abc
ghi jkl
mno
pqrs
tuv
_+ *
wxyz
def
21
Installation and Connections
TV ANTENNAS
Recommendations
active antennas that are
ly and receiver’s
s. The antenna should be
for the .
v
•
•
•
the is
ed test various positions
s,
• with care
•
INSTALLATION GUIDELINES
Use only amplified
adequate directly powered by the
antenna connector suitable
reception of theDigital Terrestrial signal
Quantum Antennas are manufactured and linked to
the Q100 receiver in order to optimize performance
.
Be sure to position the antennas as far away and
opposing from each other as possible. For example, place the first antenna on the right side of the
wind screen of the vehicle and the second one
on the left side of the rear window or on the left
rear vent wing .
Antennas must be installed as far away from the
metal parts (vehicle's roof or vertical borders of
the wind screen/rearvent wing) aspossible.
The bonnet or the boot (depending on the vehicle) can influence signal reception. It recommend to to place the
antenna whether on the higher or the lower part
of the window.The higher part usuallyguarantees
more protection from noises caused by motorcycles and scooters.
Handle the coaxial cable setting in order
to avoid damagesdue to vibration orcrushing.
Be sure that the connections have been correctly
set and check the screwingof the connectors. Signal reception problems are often caused by incorrect assembly.
WARNING: ONLY usethe Quantum antenna
provided. Use of different antenna or other
external power may result in product damage
and might affect the warranty terms
20
DVB-T Daily Use
v
v
v
v
v
v
How to selecta channel ina TV/Radio List
How to adjustthe volume level
Mute
How to viewprogram info
How to selectthe audio language
How to selectsubtitles
• Press [LIST] to show theTv List
› Press [GREEN] to switch between the general TV LIST
and the FAVOURITE TV LIST if previously preset [see
MENU]
• Press [TV/RADIO] (yellow) to showthe RADIO LIST
› Press the same button to switch between the Radio List
and the previously selected TVLIST
• Select the desired channel
:
The volumelevel can beadjusted by using the [VOL+] [VOL-]
buttons
• Press [MUTE] button to switchon/off the audio output
• Press [info] to view short informations about the selected
program
• Press [BLUE] to get detailed informations about the
selected program
To select the desired language (when more languages are
available):
• Press [info] + [GREEN] and select the desired
language by usingthe up/down[ ] [ ] buttons
Toselect the desired subtitle (whenavailable):
• Press [info] + [GREEN] and select the desired subtitle
option by usingthe up/down[ ] [ ] buttons
WARNING in red
due to lackof network coverage
(*)
channels marked are temporarily not
available
56
56
channels marked are temporarily not
available
FAVOURITETV
1C TV2hannel
ChannelTV
3 Channel TV
4 Channel TV
5 Channel TV
6 Channel TV
7 Channel TV
TVLIST
[GREEN] to change list
1
1
SCAN
A/V
OK
P+
P
V+
CHANNEL
12
3
4
5
6
7
809
EXIT
BACK MUTE
LIST
info
MENU
TV
RADIO
@?!.
abc
ghi jkl
mno
pqrs
tuv
_+ *
wxyz
def
TV
RADIO
9
Installation and Connections
FRONT PANEL
WARNING:
+5V PHANTOM POWER IS PRESENT
IN ALL “ANTENNA IN” CONNECTORS
+12V/24V KEY - Red
+12V/24V BATTERY - Yellow
BRAKE - Green
GND - Black
VIDEO OUT 1 (FRONT)
VIDEO OUT 2 (REAR)
VIDEO IN
AUDIOOUTR(rigth)
AUDIO OUT L (left)
ANTENNA IN 1
ANTENNA IN 2
IR RECEIVER
TO CAR AUDIO
SYSTEM
RJ11 PORT
AUDIOINR(rigth)
AUDIO IN L (left)
EXTERNAL
AUDIO SOURCE
EXTERNAL
VIDEO SOURCE
FRONT
MONITOR
REAR
MONITOR
(*) applicable only to Q100T model
1910
Audio/Video switch
SCAN
A/V
LIST
P+
info
The receiver enables the user to connect an external
audio/video source (e.g. Videogame console, Dvd player,
etc..) to the audio/video input (as shown at page 17) and
to select itthrough the remote control
Using the Power button of the remote control the user
may switch from digital Tv signal to external sourcesignal
and viceversa.
v Audio/video Inputs
sHow to selectaudio/video input:
WARNING: FRONT monitor should be enabled only
once the handbrakecontrol is activated.
Installation
WARNING:
Before installing thedevice
read carefully the following instructions
!
HAVE THE INSTALLATION DONE BY
QUALIFIED PERSONNEL
DO NOT INSTALL IN LOCATIONS
WITH HIGH MOISTUREOR DUST
MAKE THE CORRECTCONNECTIONS
The installation and wiring of this unit
requires special technicalskills and experiences. To ensure safety, always have
the installation doneby experts
Route the electrical and audio/video
cables, wiring away from moving parts
and sharp/pointy edges.This will
prevent crimping and damage to the
wires. If wiring is passing through a
metal hole, use of a rubber grommet
can act as a form of insulation
preventing the wires from being cut by
the metal edgesof the hole.
Avoid installing the unit in locations with
high levels of moisture or dust.
Prenetration of moisture or dust may
result in productfailure.
Failure to make the proper connections
may result in product damage
USE SPECIFIED ACCESSORYPARTS
ARRANGE THE WIRINGCORRECTLY
USE ONLY IN CARS WITH A 12 / 24
Vcc NEGATIVE GROUND
BEFORE WIRING DISCONNECT THE
CABLE FROM THE NEGATIVE (-)
BATTERY TERMINALS
DO NOT SLICE INTO ELECTRICAL
CABLES
DO NOT USE BOLTS OR NUTS IN THE
BRAKE OR STEERING SYSTEM TO
MAKE GROUND CONNECTIONS
DO NOT INSTALL IN LOCATIONS
WHICH MIGHT HINDER VEHICLE
OPERATION, SUCH AS THE
STEERING WHEEL OR GEARSHIFT
Be sure to use only the specified accessory parts. Use of accessory parts other
than designed may damage this unit or
cause incorrect functioning of the appliance
Failure to do so may result infire, electric
shock or other injuries
Failure to do so may result in electric
shock or electric shock injuries.
Never cut awaycable insulation to supply
power to other equipment. Doing so will
exceed the current carrying capacity of
the wire and result infire orelectric shock
Bolts or nuts used for the brake or steering systems (or any other safety-related
system), or tanks should NEVER be used
for installations or ground connections
Doing so may obstruct forward vision or
hamper movement etc., and result in serious accident
18
11
Multimedia
v MULTIMEDIA
Q100 series is able to support multimedia files stored on a
USB key (ver. 1.1).
Insert USB keyin the Q100 USB plug.
Supported format is:
.AVI for video files
.Mp3 for audiofiles
Max resolution supportedis SD (720x576).
• Press [RED]button of the remotecontrol
• Select multimediaoption from the listand press OK
• Select Video/Audio option to display Video/Audio
files stored inthe USB key.
• From the list of available Video/Audio files, select
one file and press [OK] button. The Video/Audio
player will automaticallystart playing the file.
Press [INFO]button of the remote todisplay progress
bar and options,in particular:
[RED] button, toseek back the file
[BLUE] button, tostop playing
[GREEN] button, topause/play the file
[YELLOW] button, toseek the file
[BACK] button, togo back in the filelist
Press [EXIT] button of the remote to quit Multimedia
section and goback to digital TVchannels.
v
v
v
How to showthe list of multimedia files
How to playa multimedia file
How to quit multimedia section
:v How todisplay options
DVB-H PayTV Menu (*)
In case of DVB-H PayTV services, the user may use
the DVB-H menu to have access to the following
options:
- My Subscription info
- Parental control settings
With such option the user may display the list of
subscribed packages (if broadcasted by the DVB-H
Operator).
v
s
v
My Subscription
Parental Control
• press [ME
• select MY SUBSCRIPTION by using the right and
left [ ] [ ]buttons
• press [OK] to confirm the selection or [EXIT] to
cancel.
If available, thelist of subscribed packages maybe displayed.
To access restricted channels a PIN code is needed.
This is provided with the SIM.
The restriction level may be set in the following
way:
• press [ME
• select PARENTAL CONTROL by using the right
and left [ ] [ ] buttons
• press [OK] to confirm the selection or [EXIT] to
cancel.
• browse the list sequentially by using the up and
down buttons [ ][ ]
• press [OK] to confirm the selection or [EXIT] to
cancel.
• Enter PINcode to apply thechanges
How to viewsubscribed package
NU]
NU]
34
34
56
(*) applicable only to Q100TH model
DVB-H
MULTIMEDIA
Video
Audio
1712
Main Menu - SETTINGS
SCAN
A/V
OK
P+
P
V+
CHANNEL
EXIT
info
MENU
LIST
vvMAIN MENU
SETTINGS
.T
The mainMENU may beused to see system info and/or set
user’s preferences.
The following optionsare available:
:
• SETTINGS
• TV LIST
• DIAGNOSTICS
Todisplay main menu press [MENU]of the remote control.
This sub-menu showsthe data related to:
• RECEIVER
• RESTORE
• CLOCK
• Press [MENU] to view the mainmenu on the screen
• Select SETTINGSby using the rightand left [ ] [ ]
buttons.
• Press OKto enter this sub-menuand then press it again
till you getthe required item
• Select the desired function firstlyby using the right and
left buttons [ ] [ ] and then theup and down [ ]
[ ] buttons
• Press [OK] to confirm the selectionand to move to
the next functionor [EXIT] to cancel the selection
Sub-menus
WARNING: Be careful not to accidentally change
the parameters. this will aid to the misfunctioning
of the device. Default settings are normally used
for standard installation hey can be restored
through the RESTOREfunction.
How to navigatethe Settings Menu
s
34
34 5
6
SETTINGS
Receiver settings: [OK] to confirm - [EXIT] to quit
DIAGNOSTICS
TVLIST
DVB-H PayTV (*)
When using the PayTV option, to have access to
the encoded channels the user must have a valid
subscription with the Operator which is
broadcasting the DVB-H signal.
Once the subscription is in place, the Operator
provides a smart card (SIM card) that will be used
to decrypt channels.
Please refer to page 23 to insert SIM card into the
relevant SIM slot of the unit.
In the case where the SIM card is not related to the
rigth DVB-H Operator or the SIM card is not properly
inserted in the unit’s slot, message (1) may be
displayed.
Please check theSIM card again.
In the case where the subscription has expired or a
new package subscription is required, message (2)
may be displayed.
Torenew subscription refer to thedisplayed message.
The subscribed package may include specific
channels (adult channels) that may require a
Parental PIN code to have full access (3).
Press [OK] and insert PIN code using remote
control digits [1,2,..] then press [OK] again to
confirm.
Please note that PIN code is provided together with
the SIM card.
vvSubscription
If a valid subscription is in place, all TV channels
available with that subscription will be accessed
without distinction between free to air and Pay
channels.
PIN Code
(*) applicable only to Q100TH model
13
16
RECEIVER
RESTORE
CLOCK
w
w
w
TV OUT
MENU LANGUAGE
MENU COLOR
RECEIVER DATA
CHANNELS LIST
•
Set tv outmode according your screen type :
› 4:3 pan & scan
› 4:3 letter box
› 16:9
•
Toselect the menu language
•
Toset color of menu
This function enables the user to reset the input data
among the followingcategories:
•
Toreset settings, system and installationparameters
•
Todelete all the channels lists
It is possible to make a completely restore the data by
selecting both items.
The receiver's clock will be automatically updated through
the tv signal. It's possible, if desired, to change the time
zone, set atGMT+1 by default
SETTINGS
DIAGNOSTICS
TVLIST
CLOCK
RECEIVER
RESTORE
[OK] to confirm - [EXIT] to quit
Local time 11:23
Greenwich time 09:23
Offset +-01:00
Main Menu - SETTINGS
DVB-H mode (*)
Be sure that every connection has been correctly
set, as shown on page 20
Use P+ and P- buttons of the remote control to zap
the available digital channels.
Press [LIST] toshow the TV List(3)
Zapping
and 23.
Once the unit is ON, please use the red button of the
remote control to switch from DVB-T mode to DVB-H
mode and viceversa.
For first time use (after a power off/on) when the
DVB-H mode is entered, the device will automatically
scan UHF bandwith (channels 21-69) tosearch for the
pre-configured DVB-H listing the user has subscribed
(1).
Once the listing is found (2), the unit will download
related EPG (electronic program guide) and will tune
and displays thefirst digital TV channel ofthe list.
Select the desired channel by using the up/down
buttons[ ] e [ ] and press [OK] to confirm the
selection.
Once the TV List is displayed:
If available, press [GREEN] button to view program
guide (4) of the specific channels sorted by time.
Press [BLUE] button to view a new day program
guide
v
v
v
v
Getting started
Channel List
Program Guide
56
(*) applicable only to Q100TH model
14
Main Menu - TV LIST
v How tomanage the Favourite Tv List
It is possibleto create a personalfavourite Tv List.
TV LIST and RADIO LIST are all the tuned channels so they are
not initially personalize.
• press [MENU]
• select TVLIST and press [OK] to confirm
• select CREATE andpress [OK] to confirm
• browse the list sequentially by using the up and down
buttons [ ][ ] , or in groups of six channels by using
right and leftbuttons [ ][ ] and select the channel
• press [OK] to confirm the selection. Atick signal will be
shown next tothe selected channel
• f you want to cancel the selection press again and
the tick will bedeleted
Follow the same procedure as shown at the point 1 and
replace CREATE with DELETE.
• press [MENU]
• select TVLIST and press [OK] to confirm
• select SORTand press [OK] to confirm
• browse the list sequentially by using the up and down
buttons [ ][ ] or in groups of six channels by
using the right and left buttons[ ][ ] and select
the channel youwant to move
• browse the list in the same way and click on the position
where you want to move the selected
channel. A tick mark will be shown next to the
selected channel
• press [OK] to confirm the new positionof the channel
Follow the same procedure as shown at the point 1 and replace
CREATE with ERASE
1. How tocreate the Favourite Tv List:
2. How to delete a channel from the Favourite Tv List:
3. How tosort the Favourite Tv List:
4. How todelete the FavouriteTv List:
ü
ü
56
34
56
34
3
i [OK]
mark
SCAN
A/V
OK
P+
P
V+
CHANNEL
EXIT
info
MENU
LIST
[EXIT to quit and save
TV LIST
SETTINGS
DIAGNOSTICS
CREATE
SORT
DELETE
ERASE
1TV
2
Channel
ChannelTV
3 Channel TV
4 Channel TV
5 Channel TV
6 Channel TV
ü
ü
[EXIT] to quit and save
1TV01
2
Channel
ChannelTV 02
3 Channel TV 03
4 Channel TV 04
5 Channel TV 05
6 Channel TV 06
3
4
TV LIST
SETTINGS
DIAGNOSTICS
DELETE ERASE ADD
SORT
Main Menu - DIAGNOSTICS
SCAN
A/V
OK
P+
P
V+
CHANNEL
EXIT
info
MENU
LIST
vsDIAGNOSTICS
NU]
The receiver can provide the following diagnostics
information:
• SIGNAL QUALITY
• RECEIVER INFO
• press [ME
• select DIAGNOSTICS by using the right and left
[ ] [ ] buttons
• press [OK] to confirmthe selection or [EXIT] to can-
cel it.
How to viewthe DIAGNOSTICS:
34
15
Loading...