Customer Service
If you have a question about your air purifier, call our toll-free customer
service number. Before calling, please note the model, type and serial
number and fill in that information below. These numbers can be found on the
back of the air purifier. This information will help us answer your question
more quickly.
QUANTUM PURE AIRE
PRODUCTS, LLC
MODEL:__________ SERIAL:______________
ONE-YEAR LIMITED WARRANTY
Quantum Pure Aire Corporation warrants this air purifier to be free of defects in
material and workmanship for a period of one year from the date of original purchase.
If the unit is damaged in shipping or fails in operation, notify us immediately.
Call 1-800-966-5575 the Customer Service Department.
If your unit is within the warranty period, it will be repaired at no cost to you.
Only Quantum Pure Aire Customer Service can issue a Return Authorization Number
(RA#) for repair. NO returns will be accepted without a RA#. After obtaining a RA#,
forward the unit and the AC adapter prepaid to the address below. It is recommended
that the RA# be prominently placed on the outside of the shipping carton. Failure to
follow these steps may lead to unnecessary delay and expense in processing your request.
If the unit is beyond the warranty period, we will repair, retrofit or otherwise return the
unit to an operational state. You will be given the cost of the repairs prior to your
returning it to us. ALL REPAIRS MUST BE PREPAID.
All warranty benefits are void if the unit is, (a) operated contrary to the operating
manual; (b) serviced by an unauthorized agent; or (c) misused or abused.
This warranty is NOT TRANSFERABLE unless authorized by the factory.
No agent or reseller is authorized to warranty or repair this product.
INNOVATORS OF AIR TREATMENT SYSTEMS
Light Commercial Series
LCS & LC Units
NO OTHER WARRANTY OTHER THAN THIS WARRANTY IS VALID.
QUANTUM PURE AIRE PRODUCTS, LLC
333 Strawberry Field Road, Ste 5
Warwick, RI 02886-6772 USA
Toll Free: 800-966-557 • Tel: 401-732-6770 • Fax: 401-732-6772
www.quantumpureaire.com
THIS MANUAL SUPERSEDES ALL PREVIOUS PUBLICATIONS
OWNER'S MANUAL
AIR PURIFIER SAFETY
SPECIFICATIONS
PLEASE READ AND SAVE THESE INSTRUCTIONS
In order to prevent the risk of fire, electric shock, personal injury or damage to property, follow these instructions
carefully. When using electrical appliances, basic safety
precautions should be observed, including the following:
1. Read all instructions before using this air purifier.
Save these instructions for reference.
2. Do not immerse this product in water. An electrical
short may result in shock or fire.
3. Do not handle the plug with wet hands; electrical
shock may occur, resulting in injury or death.
4. Never attempt to disassemble or alter the product
in any way not instructed by this manual. Shock, fire
or bodily injury may occur. Contact Quantum Pure
Aire Corp. at 1-800-966-5575 for assistance.
5. Do not operate this product near an open flame. It
may ignite and cause a fire, resulting in bodily injury
or property damage.
6. Do not insert foreign objects into the product for any
reason. Bodily injury or property damage may occur.
7. Do not use this product outdoors. It is intended for
indoor use only.
Return Policy
Returned units will not be accepted without a RA (Return Authorization)
number issued by the Customer Service Dept. or Sales Dept. Units
must be returned within thirty (30) days of date received. All returned
merchandise must be in excellent condition or a fee will be assessed.
Freight charges are non-refundable on any returned or refused delivery.
Refunds will be issued approximately ten (10) days after unit is received
in our facility.
Failure to follow these steps may lead to unnecessary delay and
expense in processing your request.
MODELS & EFFECTIVE MAXIMUM AREA
* LCS-2500.......... 2500 SQ.FT.
* LCS-3500.......... 3500 SQ.FT.
* LCS-4500.......... 4500 SQ.FT.
* LC - 5500.......... 5500 SQ.FT.
* LC - 7500.......... 7500 SQ.FT.
* LC - 10000........ 10000 SQ.FT.
* LC - 15000........ 15000 SQ.FT.
SPECIFICATIONS
* Size......................11”W x 10”L x 6”H
* Color.....................Black
* Weight..................3.5 lbs. to 5.5 lbs.(Depending on the model)
* Power...................120Vac / 240Vac (1.2 to 4 amps Depending on the model)
* Watts....................15 to 50 Watts (Depending on the model)
FEATURES
* Maintenance Free
* Self-cleaning corona discharge plates.
* Produces Negative Ions.
* Re-usable, Washable Filters
* Switching power supply 50 to 60 Hz for international power (International
power cables available)
MAINTENANCE
* Easy Filter Cleaning
Quantum Pure Aire Corp. Air Treatment Units are devices that use high voltage to
create ozone. Please read this manual in its entirety before using this machine.
Familiarity with its contents will assure years of safe and efficient use. Quantum Pure
Aire makes NO MEDICAL OR HEALTH CLAIMS with regards to the use of this
ozone generator.
Page -2- Page -7-
Helpful Tips
DO NOT- operate the unit for days without monitoring its
operation. This is true of any electronic device.
DO NOT- open windows while operating the unit, this will
diminish the effectiveness of the process.
DO NOT- operate the unit when there is a strong OZONE
smell. This smell verifies that the purification
process is complete. Turn the unit setting down
or turn the unit OFF.
DO NOT- operate the unit beyond the recommended
maximum size area.
DO NOT- open or tamper with the unit or the warranty WILL
become void.
DO NOT- operate the unit near water. It is an electrical
device and care should be taken to avoid the
possibility of electrical shock.
DO NOT- assume the unit is malfunctioning if the pollutant
level or odor does not disappear IMMEDIATELY.
Temperature, humidity and time, as well as the
amount of pollutants can hinder the performance
of ozone. Running the unit for a longer period of
time to control the problem may be required.
DO NOT- assume the unit is malfunctioning if the unit does
not turn ON or does not respond to every odor
when operating in the automatic mode. Not all
VOC's or contaminants are of sufficient strength
to trigger the unit on. This unit can also be
turned ON in Manual mode to control unwanted
odors.
DO NOT- expect the unit to solve your problem INSTANTLY!
In some extreme cases, the area being treated
may require additional cleaning methods as well
as operating the unit.
An Ozone AirTreatment System
Ozone is a very powerful oxidant that is produced naturally.
It is created in the stratosphere by ultraviolet rays from the
sun, reacting with oxygen (The Ozone Layer). The resultant
photochemical process forms ozone. Ozone protects us
from exposure to the harmful UV rays of the sun.
When it rains, upper level ozone is combined with raindrops
and falls to earth. During a severe storm, ozone is generated
as the bolt of lightening passes through the air; the electrical
reaction "excites" the oxygen molecules and creates ozone.
Ozone is also generated on earth in greater than normal
amounts in highly polluted areas. Nature uses the
photochemical process again to react to smog at the earth's
surface. As pollution increases, the density of air increases.
UV rays passing through the denser air are catalysts for a
photochemical reaction that results in an increase in the
concentration of ozone. As the ozone overcomes or oxidizes
the pollutants, the air becomes less dense. Thus the
self-balancing act of nature provides a natural purification of
the air. The normal concentration of ozone in clean air
is .03-. 05 PPM.
The QUANTUM PURE AIRE CORP. AIR TREATMENT SYSTEM
is designed to create the above-mentioned level of ozone in
your indoor environment. By doing so, ozone will be
introduced into your home or office and will clean your
domestic air as it does the outside air...NATURALLY!
Page -6- Page -3-
c o n t r o l p a n e l f o r l i g h t c o m m e r c i a l w i t h s e n s o r
c o n t r o l p a n e l f o r l i g h t c o m m e r c i a l w i t h o u t s e n s o r
Light Commercial
air treatment system
with puri-
Contaminant Status
Contaminant Neutralize
Contaminant Present
03 Active
Contaminant Level
High
Medium
ON
OFF
10
MANUAL AUTO
Low
5
1
UNDERSTANDING HOW YOUR UNIT WORKS
1. Contaminant Neutralized: This Green Light indicates that the
contaminants are neutralized and the sensor is in standby mode.
In this mode, the fan will run continuously and the unit will monitor the
levels of impurities in the air. When the air contains very little or no
contaminant the light remains on. NOTE: when the unit is first turned on,
this light will blink on and off for about 3 minutes as the unit warms up.
It will remain ON when the unit is ready to operate.
2. Contaminant Present: This Red Light indicates the presence of sufficient
impurities in the air to signal the system to begin the cleaning process.
3. O3 Active: This Green Light will turn ON whenever ozone is generated.
4. Contaminant Levels: These Yellow Lights indicate the levels of impurities
as HIGH, MEDIUM & LOW. When the purification process is complete,
all Yellow Lights will turn off.
5. ON/OFF Control Knob: This Knob must be in the ON position to operate
the unit in either mode.
6. Auto/Manual Control Knob: You have a choice of one of two modes.
Auto Mode: In this mode, the unit will operate under the control of the
puri-stat. The air quality will be monitored and treated by the unit
automatically.
Manual Mode: In this mode, the unit will by-pass the sensor
circuit and
knob clockwise
NOTE: On this mode the unit will generate ozone continuously.
allows the user to operate the unit manually. By turning this
, the fan speed is decreased.
Light Commercial
air treatment system
03 Active
POWER ON
5
4
3
2
ON
8
9
1
0
1
OFF
6
7
UNDERSTANDING HOW YOUR UNIT WORKS
1. On / Off knob: Turning the knob clockwise to the ON position will turn
the machine on. Turning this knob clockwise will also control the fan speed.
A higher speed will produce more Ozone.
2. O3 Active: This green light will turn ON to indicate that Ozone is
generated.
3. Power On: This Red light will remain on when the machine is operating
Ozone
HOW TO OPERATE
1. Place your air purifier at counter height or higher. This placement will give
you the best possible results. This is an electrical device. To reduce the risk
of electric shock, never plug the air purifier into an outlet while your hands
are wet. Never expose to rain or place the unit in standing water.
2. Plug the AC power cord to an 110Vac or 240Vac outlet.
3. Place unit at least 3" to 6" from a wall or bulkhead, this allows for proper
ventilation.
4. Chose Auto or Manual Mode
5. Turn the unit ON by turning the ON/OFF Control Knob to the ON position.
NOTE: If Manual mode is selected, then fan speed control will be available.
Page -4- Page -5-
Loading...