Quantum Fireball 540, Fireball 1080 User Manual

Fireball 540/1080
fireball_540_jumper.pdf
ATA Configuration Guide
CMOS Values
C apacity 540MB 1080MB
C ylinders 1056
H eads 16
S ectors 63
W riting Precomp 65535
L anding Zone 1056
Note on Write Pre-compensation:
The Quantum Fireball does not require write pre-compensation, your CMOS setting should be set to reflect that this feature is not enabled. If the setting of 'none' is not present, the value 65535 is a number that the BIOS will accept to disable this feature.
Jumper Settings
2112
16
63
65535
2112
S ingle Drive D S only
M aster Drive D S only
Slave Drive
N o jumpers
1 of 1
Fireball 540/1080
fireball_540_jumper.pdf
SCSI Configuration Guide
Jumper Settings
Drive Termination
E nable Termination T E jumper on
D isable Termination T E jumper off
Set SCSI ID
S CSI ID A0
0 Off
1 On
2 Off
3 On
4 Off
5 On
6 Off
7 On
ote: PK (Park) jumper has no defined value and is used to hold extra jumper.
N
A1
Off
Off
On
On
Off
Off
On
On
A2
Off
Off
Off
Off
On
On
On
On
2 of 2
Loading...
+ 1 hidden pages