DXi6701 and DXi6702 Site
DXi6701 or DXi6702
Node
DXi6701 or DXi6702
Expansion Module
Product Overview
Planning Guide
DXi6701 and DXi6702
Contents
Product Overview................................... 1
Included With Your DXi6701 and
DXi6702.................................................. 2
Licenses .............................................. 2
DXi Accent.......................................... 3
Installation ............................................. 3
Rack Compatibility............................. 3
DXi6701 and DXi6702 Setup and
Configuration..................................... 3
Network Configuration...................... 4
Firewall Ports ..................................... 4
Installation and Integration Services . 6
Service .................................................... 7
DXi6701 and DXi6702 Warranty........ 7
Service Package Upgrades ................. 7
Email Reports ..................................... 8
StorageCare™ Guardian..................... 8
DXi Advanced Reporting.................... 8
DXi6701 and DXi6702 Configurations... 9
DXi6701 and DXi6702 Shipping
Information.......................................... 10
DXi6701 and DXi6702 Specifications... 10
Physical Characteristics .................... 12
Environmental Specifications .......... 17
The DXi6701 and DXi6702 disk backup and replication appliances use
Quantum’s data deduplication technology to expand the amount of
backup data users can retain on fast-recovery RAID systems by 10 to 50
times. The result is a cost-effective way for IT departments to store backup
data on disk for months instead of days, providing high speed, reliable
restores, increasing available data recovery points, and reducing media
management.
For disaster recovery in distributed environments, the DXi6701 and
DXi6702 systems make automated WAN replication practical by
dramatically reducing the bandwidth required to move backup data
securely between sites.
DXi6701 and DXi6702 solutions are integrated systems that are easy to
install and use with all leading backup applications. They provide best-inclass performance with flexible, easy-to-use interface options including
NAS, OST, virtual library, or mixed presentations, as well as Ethernet and
Fibre Channel connectivity. DXi6701 and DXi6702 appliances are part of a
comprehensive set of backup solutions, serviced and supported by
Quantum, the leading global specialist in backup, recovery, and archive.
Note: This guide is for DXi6701 and DXi6702 with DXi 2.2 Software.
www.quantum.com
DXi6701 and DXi6702 Site Planning Guide
Included With Your DXi6701 and DXi6702
The DXi6701 and DXi6702 are fully configured to your specifications and pre-tested in
the factory. Every DXi6701 and DXi6702 configuration arrives with all necessary parts
included. Each system comes with an accessory kit containing rack-mount hardware and
a Quick Reference and Documentation CD which includes the
Licenses The following licenses are included with the DXi6701 and DXi6702. Some licenses are
pre-installed and some are included on License Certificates, as noted below.
• NAS - Enables the NAS interface to hosts. (License key is pre-installed on all DXi6701
and DXi6702 models.)
• VTL - Enables the VTL interface to hosts. A license for 80 virtual tape drives is pre-
installed, and additional virtual tape drives licenses can be added through the VTL
license area. (License key is pre-installed on all DXi6701 and DXi6702 models.)
• Backup Application Specific - Enables the backup application specific path to tape
capability. (License key is pre-installed on all DXi6701 and DXi6702 models.)
User’s Guide
.
Note: DXi6701 and DXi6702 support NDMP V4.
• Data Deduplication - Enables the data deduplication capability. (License key is pre-
installed on all DXi6701 and DXi6702 models.)
• Replication - Enables replication capability. (License key is pre-installed on all
DXi6701 and DXi6702 models.)
• Storage Capacity - Enables the installed storage capacity for the system. (License
key is pre-installed on all DXi6701 and DXi6702 models.)
A storage capacity license key is pre-installed for all capacity shipped from the
factory. You must install license keys for additional capacity purchased after the
initial point of sale are installed.
Note: If you purchase a storage capacity upgrade, a License Certificate to enable
the additional capacity is included with the upgrade.
• OST - Enables the OpenStorage (OST) connection. (License Certificate is included
with all DXi6701 and DXi6702 models.)
Follow the instructions on the License Certificate to obtain a license key at
www.quantum.com. Installing the OST license also enables the OST Direct PTT (path
to tape) capability on the DXi.
2 Included With Your DXi6701 and DXi6702
DXi6701 and DXi6702
DXi Accent Quantum’s DXi Accent software accelerates backups and reduces network bandwidth
requirements by distributing deduplication between the backup server and DXi
appliances. With DXi Accent, backup windows are reduced and network bottlenecks are
eliminated.
To use DXi Accent, you must install the Quantum OST Client Plug-in on the media server.
For information about installing the OST Plug-in and using DXi Accent, see the
NetBackup OST Configuration Guide
.
Symantec
Installation
Rack Compatibility Nearly all standard four-post 19” server racks meeting EIA-310 specifications are
compatible with the DXi6701 and DXi6702 rack mount kits. Rack cabinets meeting
EIA-310 specifications have an alternating pattern of three holes per rack unit with
center-to-center hole spacing (beginning at the top hole of a 1-U space) of 15.9 mm,
15.9 mm, and 12.7 mm (0.625 inch, 0.625 inch, and 0.5 inch) for the front and back
vertical rails. For detailed information, refer to the
and Configuration Guide
(6-67196).
DXi6701 and DXi6702 Installation
DXi6701 and DXi6702
Setup and
Configuration
Note: The rack mounting rails extend to support rack depths from 26.5 to 36.4 inches
(67.3 to 92.4 cm).
When planning your rack installation, be sure to consider leaving room in the rack for
future system expansion. You can expand the storage capacity of the DXi6701 and
DXi6702 by adding up to nine expansion modules. Also be sure to leave adequate room
behind the rack to open the rear rack door.
See Physical Characteristics
requirements.
After hardware has been installed and initially configured, you are ready to use your
DXi6701 or DXi6702. The remote management console allows you to reconfigure your
DXi6701 or DXi6702 at any time.
on page 12 for node and expansion module rack space
Required Network Information
To utilize the remote management console of the DXi6701 or DXi6702, you must
connect it to your network.
Note the following considerations:
• DHCP (Dynamic Host Configuration Protocol) is not supported.You must provide a
static IP address at the time of installation.
• The default IP Address is: 10.1.1.1
Installation 3
DXi6701 and DXi6702 Site Planning Guide
You and other administrative users can always return to the remote management
console to modify all DXi6701 and DXi6702 settings, including network settings. Refer
to the
DXi6700 User’s Guide
for additional information on initially configuring your DXi6701 or DXi6702.
Network Configuration During network configuration, each physical virtual Ethernet port in the DXi6701 or
DXi6702 can be configured as a separate device. In addition, you can create bonded
devices (logical ports) consisting of two or more physical virtual ports of the same link
speed (1GbE or 10GbE). For each port or device, you can specify the MTU (Maximum
Transmission Unit) frame size, and you can optionally assign the port or device to a
VLAN (Virtual Local Area Network).
After you define devices (single port or bonded), you can create up to ten network
interfaces for each device. Each interface has its own IP address information, and you
can specify the types of traffic allowed on the interface (management, replication, or
data). Finally, you can add routing information for an interface to enable connectivity
with devices on different subnets.
Note: You can choose to allow any traffic type (management, replication, or data) on
an interface. In this case, the routing of different traffic types, as well as firewall
capability, must be controlled using the network infrastructure (routers and
switches) that the DXi6701 or DXi6702 is connected to.
included on the Quick Reference and Documentation CD
Caution: For effective bonded network use, a properly configured network switch is
required. (A network switch is not supplied with the DXi6701 or DXi6702.)
The DXi6701 or DXi6702 bonding settings must match the switch settings.
If the switch settings and the DXi6701 or DXi6702 settings do not match,
your system may become inaccessible through the switch.
Firewall Ports The following firewall ports must be opened for correct function of the DXi6701 or
DXi6702.
TCP Ports Opened for Management Traffic
•22 (SSH)
•80 (HTTP)
•161 (SNMP)
•162 (SNMP, trap)
•443 (HTTPS)
• 1311 (Dell OpenManage)
• 8406 (HTTP, jettyd)
• 8407 (HTTP, thriftd)
4 Installation
TCP Ports Opened for DXi Replication Traffic
• 22 (DXi Replication)
• 80 (DXi Replication, OST)
• 1062 (DXi Replication, OST)
UDP Ports Opened for Data Traffic
• 111 (RPC, portmap)
• 628 (NFS, statd)
• 682 (NFS, rquotad)
• 880 (NFS, mountd)
• 2049 (NFS, nfsd)
• 32000 (NFS, lockd)
TCP Ports Opened for Data Traffic
DXi6701 and DXi6702
• 111 (RPC, portmap)
• 139 (CIFS)
• 445 (CIFS)
• 628 (NFS, statd)
• 682 (NFS, rquotad)
•860 (VTL)
• 880 (NFS, mountd)
• 2049 (NFS, nfsd)
• 3095 (OST)
• 3096 (OST)
• 3097 (OST)
• 3098 (OST)
• 3099 (OST)
• 3100 (OST)
• 3101 (OST)
• 3102 (OST)
• 3260 (VTL)
• 10001 (OST)
• 10002 (OST)
• 32000 (NFS, lockd)
Installation 5
DXi6701 and DXi6702 Site Planning Guide
Installation and
Integration Services
Installation and integration of the DXi6701 and DXi6702 systems by Quantum is not
required since the DXi6701 and DXi6702 are customer installable. Quantum
recommends that system installation be performed only by qualified network or system
administrators who have a working knowledge of ISV setup and configuration.
If you want to purchase professional installation services, please contact your Quantum
Sales representative to discuss installation services.
Phone support for the installation process is available via the Quantum support number
for your area. Quantum World Wide phone support is as follows:
Americas:
800-284-5101 (toll free)
949-725-2100
Europe, Middle East and Africa:
00800-4-782-6886 (toll free)
+49 6131 3241 1164
Asia Pacific:
+800 7826 8887 (toll free)
+603 7953 3010
6 Installation
Service
DXi6701 and DXi6702
DXi6701 and DXi6702
Warranty
Service Package
Upgrades
The DXi6701 and DXi6702 warranty includes one year of Quantum’s Bronze Support
Plan. This includes next business day on-site response, 5x9 telephone support, and online resources. This warranty covers the DXi6701 or DXi6702 and all drives, and includes
firmware downloads, telephone support, Email Home, and Internet access to
Quantum’s online Customer Support web site.
The Quantum Customer Support web site features online service request processing,
Web-based event status tracking, and a comprehensive Knowledge Base. Quantum’s
Knowledge Base gives you 7x24 real-time electronic access to complete product and
support resources and the expertise of Quantum’s Global Services organization.
• Customer Replaceable Units (CRUs) - Power supply module, solid state drive
(64
GB, 2.5”) in carrier, hard disk drive (1TB, 3.5”) in carrier, external SAS cable
• Field Replaceable Units (FRUs) - Chassis (Node), chassis (Expansion Module), 4 port
1GbE NIC, 2 port 10GbE NIC, 2 port 8 Gb Fibre Channel HBA, RAID controller, DDR3
memory module, battery backup module (BBU), internal SAS cable (Node), internal
SAS cable (Expansion Module), DVD-ROM drive, 80mm chassis fan (internal center),
80mm chassis fan (rear exhaust)
Note: The above lists may not be comprehensive. For additional information on FRUs,
please contact your Quantum sales representative.
Quantum’s Global Services organization is geared towards delivering the fastest possible
response and root cause resolution, helping you maximize your backup investments,
better manage processes, and make the best use of your resources. We ensure total
customer satisfaction by providing comprehensive, responsive services on a worldwide
basis.
A variety of support options are available to you via Quantum’s tiered hardware support
plans to meet a range of budget and availability requirements. Quantum’s Support
Plans include Next Business Day Gold (Next Business Day Onsite, 7x24 Phone Support),
Gold (7x24x4 Hr on-site, 7x24 phone support), and a customized Platinum offering. A
Warranty extension of Bronze (5x9xNBD on-site, 5x9 phone support) is also an option
for the second and third year of ownership. Features of the Gold and Platinum plans
include: 24-hour telephone support, on-site response, access to strategic account
management (available with select service packages), priority call handling, strategically
located spares parts, online resources, and firmware upgrades. For more information on
these service plans, please visit www.quantum.com or contact your Quantum Sales
Representative.
Quantum service engineers are available around the world and are deployed to respond
to on-site service demands. In addition, spare part depots are strategically located
around the globe so that service technicians have access to the parts and equipment
necessary to maintain or repair your DXi6701 or DXi6702.
Service 7
DXi6701 and DXi6702 Site Planning Guide
Email Reports The Email Reports capability can be configured to automatically send XML-based reports
to e-mail recipients.
The report represents a snapshot of the system information at the time the report is
generated. Quantum recommends generating and saving a report before performing a
software upgrade or reconfiguring the system.
StorageCare™ Guardian StorageCare Guardian is a remote monitoring and diagnostic solution that enables
Quantum to proactively monitor the health of Quantum systems over the Internet and
use intelligent diagnostics data to remotely service the equipment if issues arise.
StorageCare Guardian delivers more reliable backups and faster resolution time for
customers at no additional cost for supported products under warranty or service
contract.
More Reliable Backups
Leveraging the intelligence inside Quantum’s storage systems, StorageCare Guardian
proactively monitors the health of the units, uses diagnostics data to predict possible
failures, and determines whether or not the problem involves a Quantum product or
other critical components in the environment.
DXi Advanced
Reporting
Faster Resolution Time
When issues occur, StorageCare Guardian provides better diagnostics data that will
enable Quantum to identify the root cause for rapid problem resolution.
StorageCare Guardian can be downloaded from:
http://www.quantum.com/ServiceandSupport/Services/GuardianInformation/Index.aspx
DXi Advanced Reporting, which is included on all DXi appliances, sets new standards for
onboard intelligence by giving users a detailed view of internal appliance operations and
provides them with years of backup and replication data for extended trend analysis.
DXi Advanced Reporting reduces administration time, improves operations, streamlines
performance tuning, and helps users maximize the value of their DXi appliances. For
systems with a larger scope, Quantum Vision™ management software provides
industry-unique capabilities, giving IT departments global management of all their
Quantum disk and tape systems from a single console. Vision’s centralized reporting
and flexible trend analysis tools help users optimize system value by giving them
automated, flexible access to the information they need to make proactive decisions
concerning on-going system administration, dynamic capacity planning, and systemwide troubleshooting.
8 Service
DXi6701 and DXi6702 Configurations
The DXi6701 and DXi6702 can be ordered in the following configurations (see Tabl e 1 ).
Table 1 DXi6701 and DXi6702
Configurations
DXi6701 and DXi6702
Configuration Usable Capacity
DXi6701
•1 Node
• 2 or 4 RAID controller cards*
• 6 x 1GbE Ethernet ports
• 4 x 8 Gb Fibre Channel ports
DXi6702
•1 Node
• 2 or 4 RAID controller cards*
• 2 x 1GbE Ethernet ports
• 2 x 10GbE Ethernet ports (optical
or Twinax)
• 4 x 8 Gb Fibre Channel ports
8 TB – – 3U for node
16 TB 1 –
24 TB 2 –
24 TB – 1
32 TB 3 –
32 TB 1 1
40 TB 4 –
40 TB – 2
48 TB 5 –
48 TB 1 2
56 TB 6 –
Expansion
Modules with
1 TB Drive (Adds
8 TB Usable
Capacity)**
Expansion
Modules with
2 TB Drive (Adds
16 TB Usable
Capacity)**
Rack Space
Required
2U for each
expansion
module
* DXi6701 and DXi6702 configurations with 0 or 1 expansion modules include 2 RAID controller cards. All other configurations
include 4 RAID controller cards.
** Any combination of expansion modules (with 1 TB drives or 2 TB drives) may be ordered or used for field capacity upgrades as
long as the total capacity does not exceed 80 TB. The table does not list all possible combinations.
DXi6701 and DXi6702 Configurations 9
56 TB – 3
64 TB 7 –
64 TB 1 3
72 TB 8 –
72 TB – 4
80 TB 9 –
80 TB 1 4
DXi6701 and DXi6702 Site Planning Guide
DXi6701 and DXi6702 Shipping Information
The DXi6701 and DXi6702 are delivered in the following configurations (see Tab le 2).
Each node and expansion module ships in its own box. Each node shipping box weighs
approximately 125 lbs. (56.7 kg). Each expansion module shipping box weighs
approximately 75 lbs. (34.0 kg). All boxes for each DXi6701 or DXi6702 configuration
are shipped on a single pallet.
Table 2 DXi6701 and DXi6702
Shipping Configurations
Number of
Number of Nodes
Expansion Modules
Pallet Dimensions Total Pallet Weight
1 0 Width: 43 in. (109.2 cm)
Length: 28 in. (71.2 cm)
Height: 16 in. (40.6 cm)
1 1 Width: 43 in. (109.2 cm)
Length: 28 in. (71.2 cm)
Height: 26 in. (66.0 cm)
1 2 Width: 43 in. (109.2 cm)
Length: 28 in. (71.2 cm)
Height: 35 in. (88.9 cm)
1 3 Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 27 in. (68.6 cm)
1 4 Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 36 in. (91.4 cm)
1 5 Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 36 in. (91.4 cm)
Approximately 125 lbs. (56.7 kg)
Approximately 200 lbs. (90.7 kg)
Approximately 275 lbs. (124.7 kg)
Approximately 435 lbs. (197.3 kg)
Approximately 510 lbs. (231.3 kg)
Approximately 585 lbs. (265.4 kg)
1 6 Width: 52 in. (132.1 cm)
1 7 Width: 52 in. (132.1 cm)
10 DXi6701 and DXi6702 Shipping Information
Approximately 660 lbs. (299.4 kg)
Length: 42 in. (106.7 cm)
Height: 46 in. (116.8 cm)
Approximately 735 lbs. (333.4 kg)
Length: 42 in. (106.7 cm)
Height: 46 in. (91.4 cm)
Number of Nodes
DXi6701 and DXi6702
Number of
Expansion Modules Pallet Dimensions Total Pallet Weight
1 8 Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 56 in. (91.4 cm)
1 9 Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 56 in. (116.8 cm)
Approximately 810 lbs. (367.4 kg)
Approximately 885 lbs. (401.4 kg)
DXi6701 and DXi6702 Shipping Information 11
DXi6701 and DXi6702 Site Planning Guide
DXi6701 and DXi6702 Specifications
This section lists characteristics and specifications the DXi6701 and DXi6702. These
characteristics and specifications are categorized as follows:
• Physical Characteristics
• Environmental Specifications
Note: For hard drive specifications see the appropriate hard drive product manual.
Physical Characteristics The following tables provide dimensions and other physical characteristics of the
DXi6701 and DXi6702 system components:
• Ta bl e 3 - Physical Characteristics
• Ta bl e 4 - Storage Capacity
• Ta bl e 5 - Cable Drops
• Ta bl e 6 - Virtual Device Limits and Hardware Interfaces
• Ta bl e 7 - Power Requirements
Table 3 Physical Characteristics
Node Expansion Module
Height 5.2 in. (13.2 cm) 3.5 in. (8.9 cm)
Width (side to side) 17.2 in. (43.7 cm) 17.2 in. (43.7 cm)
Depth (front to back) 25.5 in. (64.8 cm) 25.5 in. (64.8 cm)
Weight (stand alone) 72 lbs. (32.7 kg) 52 lbs. (23.6 kg)
Rack Space Required 3U 2U
Air clearance Open 4 in. (10.2 cm) behind unit for proper air flow
Table 4 Storage Capacity
DXi6701 and DXi6702 Storage Capacity
Usable capacity From 8 to 80 TB
Capacity increments 8 TB (expansion module with 1 TB drives) or 16 TB (expansion module with
12 DXi6701 and DXi6702 Specifications
2 TB drives)
DXi6701 and DXi6702
Table 5 Cable Drops
DXi6701 and DXi6702 Cable Drops
Ethernet Cable Drops DXi6701 (6 x 1GbE ports) - 1 to 6 1GbE Ethernet connections for NAS or
OST connectivity, replication, and remote management
DXi6702 (2 x 1GbE ports and 2 x 10GbE ports) - 1 to 2 1GbE Ethernet
connections and 1 to 2 10GbE Ethernet connections (optical or Twinax, see
below) for NAS or OST connectivity, replication, and remote management.
Note: Quantum recommends using the approved 5 meter Twinax cable
type that is shipped with the DXi6702 system. This cable is
compatible with Cisco 5000 Series Data Center Class switches.
Note: The 10GbE Copper (Twinax) cable options that Quantum provides do
not support all switches. Please note the supported switches during
the purchase-configuration process, and if the Twinax cables
supplied by Quantum are
will need to provide your own compatible Twinax cables from your
switch vendor. Be sure to have these available before the system
installation takes place.
not
compatible with your switch, then you
10GbE Optical Cable
10GbE Copper (Twinax) Cable
DXi6701 and DXi6702 Specifications 13
DXi6701 and DXi6702 Site Planning Guide
DXi6701 and DXi6702 Cable Drops
Fibre Channel Drops 1 to 4 Fibre Channel connections for data transfer and path-to-tape
connections
Power Outlets Node - 2 USA type 3-prong power outlets (Nema 5-15) or 2 C13 type
3-prong power outlets (IEC320 C13). For additional information, see
Ta bl e 7.
Expansion Module (each) - 2 USA type 3-prong power outlets (Nema
5-15) or 2 C13 type 3-prong power outlets (IEC320 C13).
USA type 3-prong power outlet (Nema 5-15)
C13 type 3-prong power outlet (IEC320 C13)
Table 6 Virtual Device Limits
and Hardware Interfaces
DXi6701 and DXi6702 Virtual Device Limits and Hardware Interfaces
Virtual Device Limits VTL backup target: 64 partitions maximum
NAS backup target: 128 shares maximum (NFS or CIFS)
OST backup target: 100 storage servers maximum
Note: NFS version: NFSv2 and NFSv3
Note: Samba version: 3.6.0
Hardware / Interfaces DXi6701
6 ports 100/1000BASE-T Ethernet (RJ45 connector) and 4 ports 8 Gb Fibre
Channel (LC connector)
DXi6702
2 ports 100/1000BASE-T Ethernet (RJ45 connector), 2 ports 10GbE Ethernet
(optical 10GBASE-SR via LC connector or Twinax copper 10GBASESFP+Cu via
SFP+), and 4 ports 8 Gb Fibre Channel (LC connector)
14 DXi6701 and DXi6702 Specifications
DXi6701 and DXi6702
Table 7 Power Requirements
DXi6701 and DXi6702 Power Requirements
Power Supplies and Cords Node Two (2) hot-swappable redundant power supplies
Two (2) USA type 3-prong power cords with
IEC320
C13 to Nema 5-15 connectors:
Two (2) C13 to C14 type 3-prong power cords with
IEC320
C13 to IEC320 C14 connectors:
Expansion Module Two (2) hot-swappable redundant power supplies
Two (2) USA type 3-prong power cords with
IEC320
C13 to Nema 5-15 connectors
Two (2) C13 to C14 type 3-prong power cords with
IEC320
C13 to IEC320 C14 connectors
Voltage Node 100–240 VAC
Expansion Module 100–240 VAC
Frequency Node 50–60Hz
Expansion Module 50–60Hz
DXi6701 and DXi6702 Specifications 15
DXi6701 and DXi6702 Site Planning Guide
Average AC Current Node 570 Watts, 5.7A @ 100 VAC, 1945 BTU/hr
570 Watts, 2.4A @ 240 VAC, 1945 BTU/hr
Expansion Module 230 Watts, 2.3A @ 100 VAC, 785 BTU/hr
230 Watts, 1.0A @ 240 VAC, 785 BTU/hr
Inrush Peak AC Current Node 1100 Watts, 11.0A @ 100 VAC
1120 Watts, 4.7A @ 240 VAC
Expansion Module 300 Watts, 3.0A @ 100 VAC
420 Watts, 1.75A @ 240 VAC
Caution: To safeguard backups and to avoid potential data loss in the event of a
power outage, Quantum recommends that you connect the DXi6701 or
DXi6702 to an uninterruptable power supply (UPS) with a minimum UPS
capacity rating that meets the power requirements stated above.
16 DXi6701 and DXi6702 Specifications
DXi6701 and DXi6702
Environmental
Tab le 8 provides various DXi6701 and DXi6702 environmental specifications.
Specifications
Table 8 Environmental
Specifications
Climatic Environment
Te mp er at ur e Operating 10° to 35°C (50° to 95°F) up to 3048m (10,000 ft)
Shipping and storage –20° to 60°C (–4° to 140°F) up 12,000m (39,370 ft)
Relative humidity Operating 20% to 80% (non-condensing)
Shipping and storage 5% to 95% (non-condensing)
Altitude Operating –30m to 3048 m (–100 to 10,000 ft)
Shipping and storage –30m to 12,000 m (–100 to 39,370 ft)
Vibration and Shock
Operational Shock Peak Acceleration 3G
Duration 8 milliseconds
Wave Shape ½ Sine
Operational Vibration Mode Swept frequency
Frequency Range 20Hz–300Hz
Amplitude 0.25G
Rate/Duration 0.75 octaves/minute
Application X, Y, and Z axes
Shipping and Storage Mode Random Vibration
Frequency Range 4Hz–300Hz
Amplitude 0.96 Grms
Rate/Duration (PSD can be provided) 30 minutes X, Y, Z axes
Acoustic
Acoustic output Operating < 67 dBA at 1 meter, room temperature (20C)
Agency Approvals
Safety IEC 60950-1, CSA 60950-1-03/UL 60950-1
Emissions EN55022 Class A, FCC Part 15 Class A, ICES-003 Class A, VCCI Class A, CISPR 22 Class A,
CNS13438 Class A, KN22 Class A
DXi6701 and DXi6702 Specifications 17
Preserving the World’s Most Important Data. Yours.™
©2012 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, and all
other logos are registered trademarks of Quantum Corporation or of their respective owners.
Protected by Pending and Issued U.S. and Foreign Patents, including U.S. Patent No. 5,990,810.
For assistance, contact the Quantum Customer Support Center:
USA: 1-800-284-5101 (toll free) or +1-720-249-5700
EMEA: +800-7826-8888 (toll free) or +49-6131-3241-1164
APAC: +800-7826-8887 (toll free) or +603-7953-3010
Worldwide: http://www.quantum.com/ServiceandSupport
About Quantum
Quantum Corp. (NYSE:QTM) is the leading global storage company
specializing in backup, recovery and archive. Combining focused
expertise, customer-driven innovation, and platform independence,
Quantum provides a comprehensive range of disk, tape, media and
software solutions supported by a world-class sales and service
organization. This includes the DXi™-Series, the first disk backup
solutions to extend the power of data deduplication and replication
across the distributed enterprise. As a long-standing and trusted
partner, the company works closely with a broad network of
resellers, OEMs and other suppliers to meet customers’ evolving
data protection needs.
DXi6701 and DXi6702 Site Planning Guide
Immunity EN55024/KN24:
EN 61000-3-2 - Harmonic current emissions test
EN 61000-3-3 - Voltage fluctuations and flicker in low-voltage supply systems test
EN 55024:1998 - Information technology equipment - Immunity characteristics - Limits
and methods of measurements
EN 61000-4-2 - Electrostatic discharge immunity test
EN 61000-4-3 - Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 - Electrical fast transient/burst immunity test
EN 61000-4-5 - Surge immunity test
EN 61000-4-6 - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-8 - Power frequency magnetic field immunity test
EN 61000-4-11 - Voltage dips, short interruptions and voltage variations immunity test
Caution: The DXi6701 and DXi6702 systems are designed to be installed in a rack
enclosure. Ensure that the operating temperature inside the rack enclosure
does not exceed the maximum rated ambient temperature. Do not restrict
air flow to the DXi6701 and DXi6702 components.
18 6-67200-03 Rev A, August 2012
*6-67200-03 A*
Loading...