Any modern Web browser that supports the
Adobe Flash Player plug-in 10.x
This release of Quantum DXi Advanced Reporting supports the DXi2500-D,
DXi4500, DXi6500, DXi6700, DXi7500, and DXi8500 disk backup systems.
DXi Advanced Reporting combines comprehensive performance data logging
with powerful visual reporting and analysis tools to help you identify potential
problems and optimize system operation.
Quantum, DLT, DLTtape, Scalar, the Quantum logo, and the DLTtape logo are all registered trademarks of Quantum
Corporation. DXi, DXi-Series, Vision, SDLT and Super DLTtape are trademarks of Quantum Corporation. Other trademarks may
be mentioned herein which belong to other companies.
Quantum DXi Advanced Reporting 1.0.0 for DXi8500 Release Notes
6-67003-02 Rev A
November 2010
Product Features
DXi Advanced Reporting runs on a DXi system and continually works in the
background to log performance data.
To view logged data, use DXi Advanced Reporting's graphical reports. Reports
are available on demand through a Web-based interface. You can check up-tothe-minute system status or view data for any time period since data logging
began.
DXi Advanced Reporting reports let you view and work with a wealth of
performance and system statistics, such as:
• Capacity utilization
• Ethernet and Fibre Channel activity
• Data and system disk activity
•CPU load
• Data deduplication, replication, and space reclamation activities
Compatibility Matrix
Tab l e 1 provides information about hardware and software compatibility with
this release of Quantum DXi Advanced Reporting.
Table 1 DXi Advanced
Reporting Compatibility
ComponentRequirement
Quantum DXi Advanced
Reporting Software Version
Web Browser (Client)Any modern Web browser that supports the
Flash Player plug-in (Client)Adobe Flash Player plug-in 10.x or higher
User Interface version 1.0.0-20100712-1118
Data Collector version 01.02.09-115824
Adobe Flash Player plug-in 10.x.
Note: Quantum has tested DXi Advanced
Reporting with Microsoft Internet
Explorer and Mozilla Firefox.
DXi7500, and DXi8500
Caution: Quantum DXi Advanced Reporting does not support the 64-bit
version of the Flash Player plug-in on Linux. Instead, use the 32-bit
Flash Player plug-in and a 32-bit browser.
2Product Features
Quantum DXi Advanced Reporting 1.0.0 for DXi8500 Release Notes
Known Issues
Tab l e 2 lists issues that are known in Quantum DXi Advanced Reporting.
Ta b l e 2 Q u an t u m D X i
Advanced Reporting 1.0.0
Known Issues
IDDescriptionWorkaround
6-67003-02 Rev A
November 2010
10194On the Replication report, the namespace
replication completion percentage does not
reach 100% even after a replication is
completed.
10239On the Replication report, namespace
replication statistics are not reported when
namespace replication occurs immediately
following continuous replication.
15636DXi Advanced Reporting no longer logs
performance data after upgrading the
firmware on a DXi3500 or DXi5500 system.
15784If an older version of the DART service tool is
installed on a DXi system running DXi
Advanced Reporting, no error message is
displayed. However, DXi Advanced Reporting
no longer logs performance data.
16005When the Web browser is refreshed, the DXi
Advanced Reporting interface reverts to its
default appearance. (For example, the button
bar is hidden and graph titles and legends are
displayed.)
View statistics for the last replication on the
Data Services > Replication > Source Role >
NAS or VTL tab of the DXi remote
management pages.
View statistics for the last replication on the
Data Services > Replication > Source Role >
NAS or VTL tab of the DXi remote
management pages.
Reinstall DXi Advanced Reporting on the
DXi3500 or DXi5500 system.
Reinstall DXi Advanced Reporting on the DXi
system.
Use the View menu or toolbar to show or hide
interface elements as desired.
16104The Replication report does not display
statistics for replication even when a
replication occurred.
16160The time zone displayed in the button bar
cannot be changed.
Known Issues3
View statistics for the last replication on the
Data Services > Replication > Source Role >
NAS or VTL tab of the DXi remote
management pages.
All times are reported using the time zone of
the local client running the DXi Advanced
Reporting Web-based interface.
Quantum DXi Advanced Reporting 1.0.0 for DXi8500 Release Notes
6-67003-02 Rev A
November 2010
Documentation
Tab l e 3 lists the documentation that is available for Quantum DXi Advanced
Reporting 1.0.0. In addition, online help content can be accessed by clicking
Help on the DXi Advanced Reporting window.
Training is available for Quantum DXi Advanced Reporting. For more
information, see:
More information about this product is available on the Service and Support
website at http://www.quantum.com/ServiceandSupport
Support Website contains a collection of information, including answers to
frequently asked questions (FAQs). You can also access software, firmware, and
drivers through this site.
For further assistance, or if training is desired, contact Quantum:
Quantum Technical Assistance
Center in the USA:
For additional contact information:
. The Service and
+1 800-284-5101
www.quantum.com/support
To open a Service Request:
4Documentation
www.quantum.com/osr
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.